R1151N

R1151N_E.doc/2003/07/14 Boost type Voltage Regulator with Reset R1151N SERIES NO. EA-092-0307 OUTLINE The R1151N Series are CMOS-based boost type voltage regulator ICs with high output voltage accuracy, low supply current, and high ripple rejection. Each of these voltage regulator controllers consists of a voltage reference unit, an error amplifier, comparators, resistors for output and reset voltage setting, a current limit protection circuit, and a chip enable circuit. In addition to low consumption current by CMOS process, the chip enable function prolongs the battery life. Dynamic response and ripple rejection of the R1151N Series are excellent, further these are low noise type, plus maximum operating input voltage tolerance is up to 18.5V thus these ICs are very suitable for the power supply for hand, held equipment and other power management applications using AC adapter input voltage. The output voltage of these ICs is internally fixed with high accuracy. Since the package for these ICs is SOT-23-6 (Mini-mold) package, high density mounting of the ICs on boards is possible. FEATURES • Ultra-Low Supply Current ............................................... Typ. 70µA (IOUT=0mA) • Standby Mode ................................................................... Typ. 0.1µA • Low Dropout Voltage ....................................................... Typ. 0.1V (IOUT=100mA *Depends on External Transistor) • High Ripple Rejection ...................................................... Typ. 60dB (f=1kHz) • Low Temperature-Drift Coefficient of Output Voltage ....... Typ.±100ppm/°C • High Output Voltage Accuracy ........................................ ±2.0% • Excellent Dynamic Response • Small Package .................................................................. SOT-23-6 (Mini-mold) • Output Voltage.................................................................. Stepwise setting with a step of 0.1V in the range of 2.5V to 9.0V • Built-in chip enable circuit (2 types; A: active low, B: active high) • Output Capacitor .............................................................. Tantalum type recommendation (or Ceramic+Series Resistor) • Built-in output voltage detector ...................................... with delay (C version) • Detector Threshold Tolerance......................................... ±2.5% • Detector Threshold Voltage ............................................ Stepwise setting with a step of 0.1V in the range of 1.7V to 8.0V • Operating Input Voltage ................................................... Max. 18.5V APPLICATIONS • Power source for handheld equipment such as cameras and videos. • Power source for home appliances. • Power source for battery-powered equipment. 1 R1151N BLOCK DIAGRAMS R1151NxxxB 4 VDD 6 CE 1 EXT + Vref VDET 2 Vref + Current Limit 3 VOUT 5 GND R1151NxxxC 4 VDD 6 CD 1 EXT + Vref VDET 2 Vref + Current Limit 3 VOUT 5 GND SELECTION GUIDE The output voltage, mask option code, and the taping type for the ICs can be selected at the user's request. The selection can be made with designating the part number as shown below; R1151Nxxxx-xx ↑↑ ↑ ab c Code a Code Number for Voltage Setting Setting mask option : A: with CE (active at "L" type) B: with CE (active at "H" type) C: with the pin for external capacitor to set the output delay of voltage detector c Designation of Taping Type : Ex. TR (Refer to Taping Specifications.) Contents ←Part Number b 2 R1151N PIN CONFIGURATION SOT-23-6 6 5 4 VDD GND CE/CD (MARK SIDE) EXT VDET VOUT 1 2 3 PIN DESCRIPTIONS Pin No. 1 2 3 4 4 5 6 Symbol EXT VDET VOUT CE or CE CD GND VDD External Transistor Drive Pin Voltage Detector Output Pin Voltage Regulator Output pin Chip Enable Pin (A/B version) Pin for External capacitor to set Output Delay of Voltage Detector (C version) Ground Pin Input Pin Description ABSOLUTE MAXIMUM RATINGS Symbol VIN VCE/CD VOUT VEXT VDET IEXT PD Topt Tstg Input Voltage Input Voltage (CE /CE/CD Pin) Output Voltage (VOUT Pin) Output Voltage (EXT Pin) Output Voltage (VDET Pin) EXT Output Current Power Dissipation Operating Temperature Range Storage Temperature Range Item Rating 20 -0.3 ∼ VIN+0.3 -0.3 ∼ VIN+0.3 -0.3 ∼ VIN+0.3 -0.3 ∼ VIN+0.3 30 150 -40 ~ 85 -55 ~ 125 Unit V V V V V mA mW °C °C 3 R1151N ELECTRICAL CHARACTERISTICS • R1151NxxxA/B Topt=25°C Symbol VOUT IOUT ∆VOUT/∆IOUT VDIF ISS Istandby IEXTleak ∆VOUT/∆VIN Item Output Voltage Output Current Load Regulation Dropout Voltage Supply Current Supply Current (Standby) EXT Leakage Current Line Regulation Set VOUT+0.5V ≤ VIN ≤ 18.5V IOUT = 50mA f = 1kHz, Ripple 0.5Vp-p VIN = Set VOUT+1V 0.00 0.02 Conditions VIN = Set VOUT+1V IOUT = 50mA VIN - VOUT = 1.0V VIN = Set VOUT+1V 1mA ≤ IOUT ≤ 100mA IOUT = 100mA VIN = Set VOUT+1V IOUT = 0mA , VIN = 18.5V Min. VOUT ×0.98 1Note Refer to the Load Regulation Table 0.1Note 70 15 0.5 0.10 0.2 100 V µA µA µA %/V Typ. Max. VOUT ×1.02 Unit V A RR VIN ∆VOUT/∆T Ripple Rejection Input Voltage Output Voltage Temperature Coefficient Current Limit 60 18.5 dB V ppm /°C 27 mA IOUT = 10mA -40°C ≤ Topt ≤ 85°C Base Current IB of PNP Tr. VIN - VOUT = 1.0V Base Current IB of PNP Tr. VOUT = 0V 8 ±100 Ilim IRPT RUD VCEH VCEL -VDET Short Current Limit CE /CE Pull-up/down Resistance CE /CE Input Voltage "H" CE /CE Input Voltage "L" Detector Threshold Detector Threshold Hysteresis Range Output Current 2 Detector Threshold Temperature Coefficient Output Delay Time Minimum Operating Voltage 0.7 2 1.5 0.00 -VDET ×0.975 -VDET ×0.03 -VDET ×0.05 5.0 ±100 0.1 0.9 1.1 VIN 0.25 -VDET ×1.025 -VDET ×0.07 10.0 mA MΩ V V V VHYS IOUT2 ∆VDET/∆T tPLH VDDL V mA ppm /°C ms V VDD = 1.5V VDS = 0.5V , -40°C ≤ Topt ≤ 85°C 2.0 Note: This item depends on the capability of external PNP transistor. Use low saturation type transistor with hFE value range of 100 to 300. 4 R1151N • R1151NxxxC Topt=25°C Symbol VOUT IOUT ∆VOUT/∆IOUT VDIF ISS IEXTleak ∆VOUT/∆VIN Item Output Voltage Output Current Load Regulation Dropout Voltage Supply Current EXT Leakage Current Line Regulation Set VOUT+0.5V ≤ VIN ≤ 18.5V IOUT = 50mA f = 1kHz, Ripple 0.5Vp-p VIN = Set VOUT+1V 0.00 0.02 Conditions VIN = Set VOUT+1V IOUT = 50mA VIN - VOUT = 1.0V VIN = Set VOUT+1V 1mA ≤ IOUT ≤ 100mA IOUT = 100mA VIN = Set VOUT+1V IOUT = 0mA , Min. VOUT Typ. Max. VOUT ×1.02 1*Note1 Refer to the Load Regulation Table 0.1*Note1 70 100 0.5 0.10 V µA µA %/V Unit V A ×0.98 RR VIN ∆VOUT/∆T Ripple Rejection Input Voltage Output Voltage Temperature Coefficient Current Limit 60 18.5 dB V ppm /°C 27 mA IOUT = 10mA -40°C ≤ Topt ≤ 85°C Base Current IB of PNP Tr. VIN - VOUT = 1.0V Base Current IB of PNP Tr. VOUT = 0V -VDET ×0.975 -VDET ×0.03 VDD = 1.5V VDS = 0.5V , -40°C ≤ Topt ≤ 85°C CD=220pF *Note2 ±100 Ilim 8 IRPT Short Current Limit 0.7 -VDET ×1.025 -VDET ×0.05 5.0 ±100 0.9 1.6 0.9 2.7 1.1 -VDET ×0.07 10.0 mA -VDET Detector Threshold Detector Threshold Hysteresis Range Output Current 2 Detector Threshold Temperature Coefficient Output Delay Time Minimum Operating Voltage V VHYS IOUT2 ∆VDET/∆T tPLH VDDL V mA ppm /°C ms V 2.0 Note1:This item depends on the capability of external PNP transistor. Use low saturation type transistor with hFE value range of 100 to 300. Note2:VDET pin is pulled-up to VDD via 470kΩ resistance. The time is between the rising edge of VOUT level from 0.9V to (+VDET)+2.0V and the reaching point to ((+VDET)+2.0V)/2 of the VDET output voltage. 5 R1151N • Load Regulation Table Output Voltage VOUT (V) 2.5 to 3.3 3.4 to 5.0 5.1 to 7.0 7.1 to 9.0 Load Regulation ∆VOUT/∆IOUT (mV) Typ. 20 30 40 50 Max. 60 90 130 160 OPERATION In these ICs, fluctuation of Output Voltage, VOUT is detected by the feed-back registers, and the result is compared with a reference voltage with the error amplifier and control the base current of an external PNP transistor so that a constant voltage is output. The base current is monitored with the base current limit circuit. If the base current may be too large, the protection circuit works, further, output voltage is monitored with the built-in voltage detector. If the set detector threshold voltage is detected, reset signal will be output. TECHNICAL NOTES When using these ICs, consider the following points: In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For this purpose, be sure to use as much as 10µF capacitor as CL with good frequency characteristics and ESR (Equivalent Series Resistance). The best suitable equivalent series resistor value (ESR) is approximately 1Ω. If the ESR of the output capacitor is too large, output may be unstable, therefore fully evaluation is necessary. Make VDD and GND lines sufficient. When their impedance of these is high, noise pickup or unstable operation may be the result. Connect a capacitor with a capacitance value of as much as 10µF between VDD and GND as close as possible to these pins. Set external components, especially output capacitor, as close as possible to the ICs. Refer to the next equation to calculate the output delay time of C version and decide the capacitance value for the delay time. tPLH =1.83×C/(300×10-9) C: Capacitance value (F) Recommended pull-up resistance (R1) value is 470kΩ. If the value is too small, released voltage may shift, therefore, use 10kΩ or more value resistor. 6 R1151N TEST CIRCUITS PNP 1 VIN 6 R1 2 VDET 5 R1151NxxC 4 C1 C2 2 5 3 IOUT VIN 6 R1151NxxC 4 C1 C2 3 1 IOUT PNP Fig.1 Standard test Circuit R1=470kΩ C1=220pF, C2=10µF Fig.2 Supply Current Test Circuit C1=220pF, C2=10µF PNP 1 VIN 6 R1151NxxC P .G. 2 5 4 C1 C2 P .G. 2 5 3 IOUT VIN 6 1 PNP IOUT 3 R1151NxxC 4 C1 C2 Fig.3 Ripple Rejection, Line Transient Response Test Circuit Fig.4 Load Transient Response Test Circuit C1=220pF, C2=10µF C1=220pF, C2=10µF TYPICAL APPLICATION IN + CI VDD EXT VOUT PNP Tr OUT + CL R1 VDET GND RESET CD R1151NxxxC + CD (External Components) C1 10µF R1=470kΩ PNP Tr.: 2SA1441, 2SB940, 2SB703 CL 10µF 7 R1151N TYPICAL CHARACTERISTICS 1) a. Output Voltage vs. Output Current (Topt=25°C) External Tr.: 2SA1441 R1151N (VR=9.0V) 10.00 R1151N (VR=5.0V) 6.00 5.50 5.00 4.50 4.00 3.50 3.00 2.50 2.00 1.50 1.00 0.50 0.00 0 Output Voltage VROUT(V) VIN=10V VIN=11V VIN=9.5V VIN=9.3V Output Voltage VROUT(V) 9.00 8.00 7.00 6.00 5.00 4.00 3.00 2.00 1.00 0.00 0 VIN=7V VIN=6V VIN=5.5V VIN=5.3V 500 1000 1500 2000 2500 3000 3500 4000 500 1000 1500 2000 2500 3000 3500 4000 Output Current IOUT(mA) Output Current IOUT(mA) R1151N (VR=3.3V) 3.50 3.25 3.00 2.75 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 3.00 R1151N (VR=2.5V) Output Voltage VROUT(V) 2.50 2.00 1.50 1.00 0.50 0.00 VDD=4.5V VDD=3.5V VDD=3.0V VDD=2.8V Output Voltage VROUT(V) VIN=5.3V VIN=4.3V VIN=3.8V VIN=3.6V 500 1000 1500 2000 2500 3000 3500 4000 0 500 1000 1500 2000 2500 3000 3500 4000 Output Current IOUT(mA) Output Current IOUT(mA) b. External Tr.:2SB940 R1151N (VR=9.0V) 10.00 6.00 R1151N (VR=5.0V) Output Voltage VROUT(V) 5.00 4.00 3.00 2.00 1.00 0.00 VDD=7.0V VDD=6.0V VDD=5.3V VDD=5.5V Output Voltage VROUT(V) 9.00 8.00 7.00 6.00 5.00 4.00 3.00 2.00 1.00 0.00 0 100 200 300 400 500 600 700 800 900 1000 1100 VDD=11.0V VDD=10.0V VDD=9.5V VDD=9.3V 0 100 200 300 400 500 600 700 800 900 1000 1100 Output Current IOUT(mA) Output Current IOUT(mA) 8 R1151N R1151N (VR=3.3V) 4.00 3.00 R1151N (VR=2.5V) Output Voltage VROUT(V) 2.50 2.00 1.50 1.00 0.50 0.00 VDD=4.5V VDD=3.5V VDD=3.0V VDD=2.8V Output Voltage VROUT(V) 3.50 3.00 2.50 2.00 1.50 1.00 0.50 0.00 0 100 200 300 400 500 600 700 800 900 1000 1100 VDD=3.6V VDD=5.3V VDD=4.3V VDD=3.8V 0 100 200 300 400 500 600 700 800 900 1000 1100 Output Current IOUT(mA) Output Current IOUT(mA) c. External Tr.:2SB703 R1151N (VR=9.0V) 10.00 6.00 R1151N (VR=5.0V) Output Voltage VROUT(V) 5.00 VIN=7.0V 4.00 3.00 2.00 1.00 0.00 VIN=6.0V VIN=5.5V VIN=5.3V Output Voltage VROUT(V) 9.00 8.00 7.00 6.00 5.00 4.00 3.00 2.00 1.00 0.00 VIN=11.0V VIN=10.0V VIN=9.5V VIN=9.3V 0 100 200 300 400 500 600 700 800 900 1000 1100 0 100 200 300 400 500 600 700 800 900 1000 1100 Output Current IOUT(mA) Output Current IOUT(mA) R1151N (VR=3.3V) 3.50 3.00 VIN=5.3V VIN=4.3V VIN=3.8V VIN=3.6V R1151N (VR=2.5V) Output Voltage VROUT(V) 2.50 VIN=4.5V 2.00 1.50 1.00 0.50 0.00 VIN=3.5V VIN=3.0V VIN=2.8V Output Voltage VROUT(V) 3.00 2.50 2.00 1.50 1.00 0.50 0.00 0 100 200 300 400 500 600 700 800 900 1000 1100 0 100 200 300 400 500 600 700 800 900 1000 1100 Output Current IOUT(mA) Output Current IOUT(mA) 9 R1151N d. Output Voltage vs. Base Current (Topt=25°C) VR=9.0V 10.00 6.00 VR=5.0V Output Voltage VROUT(V) 5.00 4.00 3.00 2.00 1.00 0.00 Output Voltage VROUT(V) 9.00 8.00 7.00 6.00 5.00 4.00 3.00 2.00 1.00 0.00 0 2 4 6 8 10 12 14 16 18 0 2 4 6 8 10 12 14 16 18 Base Current IEXT(mA) Base Current IEXT(mA) VR=3.3V 4.00 3.00 2.75 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 2 4 VR=2.5V Output Voltage VROUT(V) Output Voltage VROUT(V) 3.50 3.00 2.50 2.00 1.50 1.00 0.50 0.00 0 2 4 6 8 10 12 14 16 6 8 10 12 14 16 18 Base Current IEXT(mA) Base Current IEXT(mA) 2) Output Voltage vs. Input Voltage (Topt=25°C) R1151N (VR=5.0V) 6.00 4.00 External Transistor: 2SA1441 R1151N (VR=3.3V) Output Voltage VOUT(V) IOUT=0mA Output Voltage VOUT(V) 5.00 4.00 3.00 2.00 1.00 IOUT=0mA 3.50 3.00 2.50 2.00 1.50 1.00 IOUT=500mA IOUT=500mA 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Input Voltage VIN(V) Input Voltage VIN(V) 10 R1151N R1151N (VR=2.5V) 3.00 Output Voltage VOUT(V) 2.75 2.50 2.25 2.00 1.75 1.50 1.25 1.00 IOUT=0mA IOUT=500mA 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Input Voltage VIN(V) 3) Output Voltage vs. Temperature R1151N (VR=5.0V) VIN=6.0V IOUT=80mA 5.125 3.375 R1151N (VR=3.3V) VIN=4.3V IOUT=80mA Output Voltage VROUT(V) 5.075 5.025 4.975 4.925 4.875 -40 Output Voltage VROUT(V) -15 10 35 60 85 3.355 3.335 3.315 3.295 3.275 3.255 3.235 3.215 -40 -15 10 35 60 85 Temperature Topt(°C) Temperature Topt(°C) R1151N (VR=2.5V) VIN=3.5V IOUT=80mA Output Voltage VROUT(V) 2.538 2.513 2.488 2.463 2.438 -40 -15 10 35 60 85 Temperature Topt(°C) 11 R1151N 4) Supply Current vs. Input Voltage R1151N (VR=9.0V, -VD=8.0V) 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 IOUT=0mA External Tr.:2SA1441 R1151N (VR=5.0V, -VD=4.2V) 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 IOUT=0mA Supply Current ISS(µA) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Supply Current ISS(µA) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Input Voltage VIN(V) Input Voltage VIN(V) IOUT=0mA R1151N (VR=3.3V, -VD=2.9V) 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 Supply Current ISS(µA) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Input Voltage VIN(V) 5) a. Supply Current vs. Temperature External Tr.:2SA1441 R1151N (VR=9.0V) VIN=10V IOUT=0mA 100 90 100 90 R1151N (VR=5.0V) VIN=6V IOUT=0mA Supply Current ISS(µA) 80 70 60 50 40 30 20 10 0 -40 Supply Current ISS(µA) -15 10 35 60 85 80 70 60 50 40 30 20 10 0 -40 -15 10 35 60 85 Temperature Topt(°C) Temperature Topt(°C) 12 R1151N R1151N (VR=3.3V) 100 90 100 90 R1151N (VR=2.5V) Supply Current ISS(µA) Supply Current ISS(µA) 80 70 60 50 40 30 20 10 0 -40 80 70 60 50 40 30 20 10 0 -40 -15 10 35 60 85 -15 10 35 60 85 Temperature Topt(°C) Temperature Topt(°C) b. External Tr.:2SB703 R1151N (VR=9.0V) 100 90 100 90 R1151N (VR=5.0V) Supply Current ISS(µA) Supply Current ISS(µA) 80 70 60 50 40 30 20 10 0 -40 80 70 60 50 40 30 20 10 0 -40 -15 10 35 60 85 -15 10 35 60 85 Temperature Topt(°C) Temperature Topt(°C) R1151N (VR=3.3V) 100 90 100 90 R1151N (VR=2.5V) Supply Current ISS(µA) Supply Current ISS(µA) 80 70 60 50 40 30 20 10 0 -40 80 70 60 50 40 30 20 10 0 -40 -15 10 35 60 85 -15 10 35 60 85 Temperature Topt(°C) Temperature Topt(°C) 13 R1151N 6) Ripple Rejection vs. Ripple Frequency (Topt=25°C) R1151N (VR=9.0V) 80 VIN=10Vdc+0.5Vp-p, Iout=50mA, CL=10µF 80 R1151N (VR=5.0V) VIN=6Vdc+0.5Vp-p, Iout=50mA, CL=10µF Ripple Rejection RR(dB) 60 50 40 30 20 10 0 0.01 0.1 1 10 100 2SB703 2SA1441 2SB940 Ripple Rejection RR(dB) 70 70 60 50 40 30 20 10 0 0.01 0.1 1 10 100 2SB703 2SA1441 2SB940 Ripple Frequency (kHz) Ripple Frequency (kHz) R1151N (VR=3.3V) 80 VIN=4.3Vdc+0.5Vp-p, Iout=50mA, CL=10µF 70 R1151N (VR=2.5V) VIN=3.5Vdc+0.5Vp-p, Iout=50mA, CL=10µF Ripple Rejection RR(dB) Ripple Rejection RR(dB) 70 60 50 40 30 20 10 0 0.01 0.1 1 10 100 2SB703 2SA1441 2SB940 60 50 40 30 20 10 0 0.01 0.1 1 10 100 2SB703 2SA1441 2SB940 Ripple Frequency (kHz) Ripple Frequency (kHz) 7) Ripple Rejection vs. Temperature R1151N (VR=5.0V) 75 VIN=6Vdc+0.5Vp-p, Iout=50mA, CL=10µF 2SA1441 2SB940 2SB703 75 R1151N (VR=3.3V) VIN=4.3Vdc+0.5Vp-p, Iout=50mA, CL=10µF Ripple Rejection RR(dB) 71 69 67 65 Ripple Rejection RR(dB) 73 73 71 69 67 65 63 61 59 57 55 -40 2SB703 63 61 59 57 55 -40 2SA1441 2SB940 -15 10 35 60 85 -15 10 35 60 85 Temperature Topt(°C) Temperature Topt(°C) 14 R1151N R1151N (VR=2.5V) 70 VIN=3.5Vdc+0.5Vp-p, Iout=50mA, CL=10µF 2SB940 2SB703 Ripple Rejection RR(dB) 65 60 2SA1441 55 50 45 -40 -15 10 35 60 85 Temperature Topt(°C) 8) a. Input Transient Response(Topt=25°C) External Tr.:2SA1441 R1151N (VR=5.0V) 5.030 IOUT=50mA COUT=Ceramic 10µF 8 7 3.340 R1151N (VR=3.3V) IOUT=50mA COUT=Ceramic 10µF 6 Output Voltage VOUT(V) Output Voltage VOUT(V) Input Voltage VIN(V) 5.020 Input Voltage 6 5 Input Voltage 3.320 3.310 Output Voltage 3.300 3.290 3.280 0 2 1 0 25 50 75 100 125 150 175 200 225 250 4 3 5.010 Output Voltage 5.000 4 3 2 1 4.990 0 0 25 50 75 100 125 150 175 200 225 250 Time (µs) Time (µs) R1151N (VR=2.5V) 2.535 IOUT=50mA COUT=Ceramic 10µF 5 4 3 Output Voltage 2 1 0 25 50 75 100 125 150 175 200 225 250 Output Voltage VOUT(V) 2.525 2.515 2.505 2.495 2.485 0 Time (µs) Input Voltage VIN(V) Input Voltage Input Voltage VIN(V) 3.330 5 15 R1151N b. External Tr.: 2SB703 R1151N (VR=5.0V) 5.030 IOUT=50mA COUT=Ceramic 10µF 8 3.340 R1151N (VR=3.3V) IOUT=50mA COUT=Ceramic 10µF 6 Output Voltage VOUT(V) Input Voltage VIN(V) 5.020 5.015 5.010 5.005 5.000 4.995 4.990 0 Input Voltage 6 5 4 Input Voltage 3.320 3.310 Output Voltage 3.300 3.290 3.280 0 4 3 2 1 0 25 50 75 100 125 150 175 200 225 250 Output Voltage 3 2 1 0 25 50 75 100 125 150 175 200 225 250 Time (µs) Time (µs) R1151N (VR=2.5V) 2.535 IOUT=50mA COUT=Ceramic 10µF 5 4 3 Output Voltage 2 1 0 25 50 75 100 125 150 175 200 225 250 Output Voltage VOUT(V) 2.525 2.515 2.505 2.495 2.485 0 Input Voltage Time (µs) c. External Tr. : 2SB940 R1151N (VR=5.0V) 5.030 IOUT=50mA COUT=Ceramic 10µF 8 3.340 Input Voltage VIN(V) R1151N (VR=3.3V) IOUT=50mA COUT=Ceramic 10µF 6 Output Voltage VOUT(V) Input Voltage VIN(V) 5.020 5.015 5.010 5.005 5.000 4.995 4.990 0 Input Voltage 6 5 4 Input Voltage 3.320 3.310 Output Voltage 3.300 3.290 3.280 0 2 1 0 25 50 75 100 125 150 175 200 225 250 4 3 Output Voltage 3 2 1 0 25 50 75 100 125 150 175 200 225 250 Time (µs) Time (µs) 16 Input Voltage VIN(V) 5.025 7 Output Voltage VOUT(V) 3.330 5 Input Voltage VIN(V) 5.025 7 Output Voltage VOUT(V) 3.330 5 R1151N R1151N (VR=2.5V) 2.535 IOUT=50mA COUT=Ceramic 10µF 5 4 3 Output Voltage 2 1 0 25 50 75 100 125 150 175 200 225 250 Output Voltage VOUT(V) 2.525 2.515 2.505 2.495 2.485 0 Input Voltage Time (µs) 9) a: Load Transient Response (Topt=25°C) External Tr.: 2SA1441 R1151N (VR=5.0V) VIN=6.0V CIN=Ceramic 4.7µF COUT=Ceramic 10µF Input Voltage VIN(V) R1151N (VR=3.3V) VIN=4.3V CIN=Ceramic 4.7µF COUT=Ceramic 10µF 5.05 120 3.35 120 100 Output Current IOUT(mA) 5.04 Output Current 5.03 5.02 5.01 5.00 4.99 Output Voltage 100 80 60 40 20 0 0 100 200 300 400 500 600 700 800 900 1000 3.34 Output Current 3.33 3.32 3.31 3.30 3.29 Output Voltage 80 60 40 20 0 0 100 200 300 400 500 600 700 800 900 1000 Time (µs) Time (µs) R1151N (VR=2.5V) VIN=3.5V CIN=Ceramic 4.7µF COUT=Ceramic 10µF 2.55 120 100 2.54 Output Current 2.53 2.52 2.51 2.50 2.49 Output Voltage 80 60 40 20 0 0 100 200 300 400 500 600 700 800 900 1000 Time (µs) Output Current IOUT(mA) Output Voltage VOUT(V) Output Current IOUT(mA) Output Voltage VOUT(V) Output Voltage VOUT(V) 17 R1151N b. External Tr.: 2SB703 R1151N (VR=5.0V) VIN=6.0V CIN=Ceramic 4.7µF COUT=Ceramic 10µF R1151N (VR=3.3V) VIN=4.3V CIN=Ceramic 4.7µF COUT=Ceramic 10µF 5.05 120 3.35 120 100 Output Current IOUT(mA) 5.04 Output Current 5.03 5.02 5.01 5.00 4.99 Output Voltage 100 80 60 40 20 0 0 100 200 300 400 500 600 700 800 900 1000 3.34 3.33 3.32 3.31 Output Voltage 3.30 3.29 Output Current 80 60 40 20 0 0 100 200 300 400 500 600 700 800 900 1000 Time (µs) Time (µs) R1151N (VR=2.5V) VIN=3.5V CIN=Ceramic 4.7µF COUT=Ceramic 10µF 2.55 120 100 2.54 2.53 2.52 Output Voltage 2.51 2.50 2.49 Output Current 80 60 40 20 0 0 100 200 300 400 500 600 700 800 900 1000 Time (µs) 10) Detector Threshold vs. Temperature R1151N (-VDET=8.0V) 8.70 4.60 Output Current IOUT(mA) Output Voltage VOUT(V) R1151N (-VDET=4.2V) Detector Threshold VDET(V) 4.50 4.40 4.30 4.20 4.10 4.00 -40 Detector Threshold VDET(V) 8.60 8.50 8.40 8.30 8.20 8.10 8.00 7.90 7.80 -40 -15 10 35 60 85 -15 10 35 60 85 Temperature Topt(°C) Temperature Topt(°C) 18 Output Current IOUT(mA) Output Voltage VOUT(V) Output Voltage VOUT(V) R1151N R1151N (-VDET=2.9V) 3.10 1.85 R1151N (-VDET=1.7V) Detector Threshold VDET(V) Detector Threshold VDET(V) 3.05 3.00 2.95 2.90 2.85 2.80 -40 1.80 1.75 1.70 1.65 1.60 -40 -15 10 35 60 85 -15 10 35 60 85 Temperature Topt(°C) Temperature Topt(°C) 11) VDET Output Voltage vs. Input Voltage R1151N (-VDET=8.0V Pull-up to VDD) VDET Output Voltage VDOUT(V) 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 1 2 3 4 5 6 7 8 9 Topt=-40°C Topt=25°C Topt=85°C R1151N (-VDET=8.0V Pull-up to 5V) VDET Output Voltage VDOUT(V) 6.00 5.00 4.00 3.00 2.00 1.00 0.00 0 1 2 3 4 5 6 7 8 9 Topt=-40°C Topt=25°C Topt=85°C 9.0 Input Voltage VIN(V) Input Voltage VIN(V) R1151N (-VDET=4.2V Pull-up to VDD) VDET Output Voltage VDOUT(V) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Topt=-40°C Topt=25°C Topt=85°C R1151N (-VDET=4.2V Pull-up to 5V) VDET Output Voltage VDOUT(V) 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Topt=-40°C Topt=25°C Topt=85°C 5.0 Input Voltage VIN(V) Input Voltage VIN(V) 19 R1151N R1151N (-VDET=2.9V Pull-up to VDD) VDET Output Voltage VDOUT(V) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 0.5 1 1.5 2 2.5 3 3.5 4 Topt=-40°C Topt=25°C Topt=85°C R1151N (-VDET=2.9V Pull-up to 5V) VDET Output Voltage VDOUT(V) 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Topt=-40°C Topt=25°C Topt=85°C 4.0 Input Voltage VIN(V) Input Voltage VIN(V) R1151N (-VDET=1.7V Pull-up to VDD) VDET Output Voltage VDOUT(V) 2.3 2.0 1.8 1.5 1.3 1.0 0.8 0.5 0.3 0.0 R1151N (-VDET=1.7V Pull-up to 5V) VDET Output Voltage VDOUT(V) 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 Topt=-40°C Topt=25°C Topt=85°C 2.5 Topt=-40°C Topt=25°C Topt=85°C 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 Input Voltage VIN(V) Input Voltage VIN(V) 12) Nch Driver Output Current vs. VDS (Topt=25°C) R1151N (-VDET=8.0V) 140 VDD=7.5V VDD=7.0V VDD=6.5V VDD=6.0V VDD=5.5V VDD=5.0V VDD=4.5V VDD=4.0V VDD=3.5V VDD=3.0V VDD=2.0V VDD=2.5V VDD=1.5V VDD=1.0V 0 1 2 3 4 5 6 7 8 9 10 60 VDD=4.0V R1151N (-VDET=4.2V) Output Current IOUT(mA) Output Current IOUT(mA) 120 100 80 60 40 20 0 50 VDD=3.5V 40 VDD=3.0V 30 VDD=2.5V 20 VDD=2.0V 10 0 0 1 VDD=1.5V VDD=1.0V 2 3 4 5 6 VDS(V) VDS(V) 20 R1151N R1151N (-VDET=2.9V) 30 8 R1151N (-VDET=1.7V) Output Current IOUT(mA) 7 6 5 4 3 2 1 0 0 0.5 1 VDD=1.0V VDD=1.25V VDD=1.5V Output Current IOUT(mA) 25 20 15 10 5 0 0 0.5 1 VDD=2.5V VDD=2.0V VDD=1.5V VDD=1.0V 1.5 2 2.5 3 1.5 2 VDS(V) VDS(V) 13) Nch Driver Output Current vs. Input Voltage R1151N (-VDET=8.0V) 40 40 R1151N (-VDET=4.2V) Output Current IOUT(mA) 35 30 25 20 15 10 5 0 0 1 2 3 4 5 Topt=85°C Topt=25°C Topt=-40°C Output Current IOUT(mA) 35 30 25 20 15 10 5 0 0 2 Topt=85°C Topt=25°C Topt=-40°C 4 6 8 10 Input Voltage VIN(V) Input Voltage VIN(V) R1151N (-VDET=2.9V) 40 40 R1151N (-VDET=1.7V) Output Current IOUT(mA) 35 30 25 20 15 10 5 0 0 0.5 1 1.5 2 2.5 Topt=85°C Topt=25°C Topt=-40°C Output Current IOUT(mA) 35 30 25 20 15 10 5 0 0 1 2 3 4 Topt=85°C Topt=25°C Topt=-40°C Input Voltage VIN(V) Input Voltage VIN(V) 21 R1151N 14) CD pin Threshold Voltage vs. Temperature R1151N (-VDET=8.0V) CD pin Threshold Voltage Vtcd(V) 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 -40 -15 10 H→L R1151N (-VDET=1.7V) CD pin Threshold Voltage Vtcd(V) 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 -40 -15 10 H→L L→H L→H 35 60 85 35 60 85 Temperature Topt(°C) Temperature Topt(°C) 15) CD Pin Output Current vs. Input Voltage R1151N (-VDET=8.0V) CD pin Output Current IOUT(mA) CD pin Output Current IOUT(mA) 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 Topt=-40°C Topt=25°C Topt=85°C 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Topt=85°C Topt=-40°C Topt=25°C R1151N (-VDET=4.2V) Input Voltage VIN(V) Input Voltage VIN(V) R1151N (-VDET=2.9V) CD pin Output Current IOUT(mA) CD pin Output Current IOUT(mA) 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Topt=85°C Topt=-40°C Topt=25°C 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 R1151N (-VDET=1.7V) Topt=85°C Topt=-40°C Topt=25°C 0.00 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Input Voltage VIN(V) Input Voltage VIN(V) 22 R1151N 16) CD Pin Output Current vs. VDS (Topt=25°C) R1151N (-VDET=8.0V) CD pin Output Current IOUT(mA) CD pin Output Current IOUT(mA) 6 5 4 3 2 1 0 0 1 2 VDD=7.5V VDD=7.0V VDD=6.5V VDD=6.0V VDD=5.5V VDD=5.0V VDD=4.5V VDD=4.0V VDD=3.5V VDD=3.0V VDD=2.5V VDD=2.0V VDD=1.5V 3 4 5 6 7 8 9 2.5 VDD=4.0V 2.0 VDD=3.5V 1.5 VDD=3.0V 1.0 VDD=2.5V 0.5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 VDD=2.0V VDD=1.5V R1151N (-VDET=4.2V) VDS(V) VDS(V) R1151N (-VDET=2.9V) CD pin Output Current IOUT(mA) R1151N (-VDET=1.7V) CD pin Output Current IOUT(mA) 0.20 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0.00 0 0.25 0.5 0.75 1 1.25 1.5 1.75 VDD=1.5V 1.00 0.90 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0.00 0 0.5 1 1.5 2 2.5 3 VDD=2.4V VDD=2.0V VDD=1.2V VDD=1.5V VDS(V) VDS(V) 17) Output Delay Time of Release vs. Temperature R1151N (-VDET=8.0V) Output Delay Time of Release tPLH(ms) 3.00 2.75 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 -40 -15 10 35 60 85 R1151N (-VDET=1.7V) Output Delay Time of Release tPLH(ms) External Capacitance=220pF 3.00 2.75 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 -40 -15 10 35 60 85 External Capacitance=220pF Temperature Topt(°C) Temperature Topt(°C) 23 R1151N 18) Output Delay Time of Release vs. External Capacitance for CD pin (Topt=25°C) R1151N (-VDET=8.0V) Output Delay Time of Release tPLH(ms) 100 R1151N (-VDET=1.7V) Output Delay Time of Release tPLH(ms) 100 10 10 1 1 0.1 10 100 1000 0.1 10 100 1000 External Capacitance for CD pin CD(pF) External Capacitance for CD pin CD(pF) 19) Output Delay Time of Detect vs. External Capacitance for CD pin (Topt=25°C) R1151N (-VDET=8.0V) Output Delay Time of Detect tPHL(µs) 10 R1151N (-VDET=4.2V) Output Delay Time of Detect tPHL(µs) 10 1 10 100 1000 1 10 100 1000 External Capacitance for CD pin CD(pF) External Capacitance for CD pin CD(pF) R1151N (-VDET=2.9V) Output Delay Time of Detect tPHL(µs) 10 R1151N (-VDET=1.7V) Output Delay Time of Detect tPHL(µs) 10 1 10 100 1000 1 10 100 1000 External Capacitance for CD pin CD(pF) External Capacitance for CD pin CD(pF) 24 R1151N Calculation of Output Delay Time of Release tPLH(s)=1.83×C/(300×10-9) tPHL vs. Capacitance Released Delay Time tPLH(ms) 30 25 20 15 10 5 0 0 1000 2000 3000 4000 5000 Measured value Calculated value External Capacitance for CD pin (pF) For Stable Operation Phase Compensation In these ICs, phase compensation is externally made for securing stable operation even if the load current is varied. For this purpose, be sure to use a capacitor for the output pin with good frequency characteristics and ESR (Equivalent Series Resistance) of which is in the range described as follows: VDET CD EXT VIN Ceramic Capacitor 4.7µF R1151NxxxxC VOUT GND Ceramic Capacitance 10µF ESR IOUT Spectrum Analyser S.A. VIN Measuring Circuit for white noise; R1151NxxxC The relations between IOUT (Output Current) and ESR of Output Capacitor are shown below. The conditions when the white noise level is under 40µV (Avg.) are marked as the hatched area in the graph. (1) VIN=VOUT+1V (2) Frequency band: 10Hz to 1MHz (3) Temperature: 25°C (4) COUT: Ceramic 10µF; ESR=0.075Ω (10kHz) 25 R1151N VR=2.5V (2SA1441) Equivalent Series Resistance ESR (Ω) Equivalent Series Resistance ESR (Ω) 100 100 VR=9.0V (2SA1441) 10 10 1 1 0.1 0.1 0.01 0 50 100 150 200 250 300 350 400 450 500 0.01 0 50 100 150 200 250 300 350 400 450 500 Output Current IOUT(mA) Output Current IOUT(mA) VR=2.5V (2SB703) Equivalent Series Resistance ESR (Ω) Equivalent Series Resistance ESR (Ω) 100 100 VR=9.0V (2SB703) 10 10 1 1 0.1 0.1 0.01 0 50 100 150 200 250 300 350 400 450 500 0.01 0 50 100 150 200 250 300 350 400 450 500 Output Current IOUT(mA) Output Current IOUT(mA) VR=2.5V (2SB940) Equivalent Series Resistance ESR (Ω) Equivalent Series Resistance ESR (Ω) 100 100 VR=9.0V (2SB940) 10 10 1 1 0.1 0.1 0.01 0 50 100 150 200 250 300 350 400 450 500 0.01 0 50 100 150 200 250 300 350 400 450 500 Output Current IOUT(mA) Output Current IOUT(mA) 26