0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
RN5RZ40BC-TR

RN5RZ40BC-TR

  • 厂商:

    RICOH(理光)

  • 封装:

  • 描述:

    RN5RZ40BC-TR - LOW DROP-OUT AND LOW NOISE VOLTAGE REGULATOR - RICOH electronics devices division

  • 数据手册
  • 价格&库存
RN5RZ40BC-TR 数据手册
LOW DROP-OUT AND LOW NOISE VOLTAGE REGULATOR RN5RZ SERIES APPLICATION MANUAL ELECTRONIC DEVICES DIVISION NO.EA-039-9803 NOTICE 1. The products and the product specifications described in this application manual are subject to change or discontinuation of production without notice for reasons such as improvement. Therefore, before deciding to use the products, please refer to Ricoh sales representatives for the latest information thereon. 2. This application manual may not be copied or otherwise reproduced in whole or in part without prior written consent of Ricoh. 3. Please be sure to take any necessary formalities under relevant laws or regulations before exporting or otherwise taking out of your country the products or the technical information described herein. 4. The technical information described in this application manual shows typical characteristics of and example application circuits for the products. The release of such information is not to be construed as a warranty of or a grant of license under Ricoh's or any third party's intellectual property rights or any other rights. 5. The products listed in this document are intended and designed for use as general electronic components in standard applications (office equipment, computer equipment, measuring instruments, consumer electronic products, amusement equipment etc.). Those customers intending to use a product in an application requiring extreme quality and reliability, for example, in a highly specific application where the failure or misoperation of the product could result in human injury or death (aircraft, spacevehicle, nuclear reactor control system, traffic control system, automotive and transportation equipment, combustion equipment, safety devices, life support system etc.) should first contact us. 6. We are making our continuous effort to improve the quality and reliability of our products, but semiconductor products are likely to fail with certain probability. In order prevent any injury to persons or damages to property resulting from such failure, customers should be careful enough to incorporate safety measures in their design, such as redundancy feature, fire-containment feature and fail-safe feature. We do not assume any liability or responsibility for any loss or damage arising from misuse or inappropriate use of the products. 7. Anti-radiation design is not implemented in the products described in this application manual. 8. Please contact Ricoh sales representatives should you have any questions or comments concerning the products or the technical information. June 1995 RN5RZ SERIES APPLICATION MANUAL CONTENTS ......................................................................................................1 FEATURES....................................................................................................1 APPLICATIONS .............................................................................................1 BLOCK DIAGRAMS .......................................................................................2 SELECTION GUIDE .......................................................................................2 PIN CONFIGURATION ...................................................................................3 PIN DESCRIPTIONS ......................................................................................3 ABSOLUTE MAXIMUM RATINGS ...................................................................3 ELECTRICAL CHARACTERISTICS ................................................................4 OPERATION ..................................................................................................6 TEST CIRCUITS ............................................................................................6 TYPICAL CHARACTERISTICS .......................................................................8 1) Output Voltage vs. Output Current .....................................................................8 2) Output Voltage vs. Input Voltage .......................................................................8 3) Dropout Voltage vs. Output Current ...................................................................9 4) Output Voltage vs. Temperature ......................................................................10 5) Supply Current vs. Input Voltage .....................................................................10 6) Supply Current vs. Temperature ......................................................................11 7) Dropout Voltage vs. Set Output Voltage .............................................................12 8) Ripple Rejection vs. Frequency ......................................................................12 9) Ripple Rejection vs. Input Voltage (DC bias) .......................................................14 10) Line Transient Response ..............................................................................14 11) Load Transient Response .............................................................................15 FOR STABLE OPERATION ...........................................................................17 POWER DISSIPATION ..................................................................................19 PACKAGE DIMENSION ................................................................................20 TAPING SPECIFICATION..............................................................................20 OUTLINE LOW DROP-OUT AND LOW NOISE VOLTAGE REGULATOR RN5RZ SERIES OUTLINE The RN5RZ Series are voltage regulator ICs with high output voltage accuracy, low supply current, low dropout voltage and high ripple rejection developed through the use of a CMOS process. Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier, output voltage setting resistors, a current limit circuit and a chip enable circuit. (Provided two types of chip enable circuit ; “H” active and “L” active, that can be selected when order.) The output voltage of these ICs is fixed with high accuracy. In addition to low supply current from CMOS process, the RN5RZ Series may lengthen battery life through low dropout voltage and chip enable function thanks to the built-in low ON resistance transistor. Also when compared with conventional regulators that employ CMOS process, these ICs have superior ripple rejection, input transient response characteristic and load transient response characteristic thus making these product suitable for power supply for hand-held communication equipment. Since the package for these ICs is the SOT-23-5 package, high density mounting of the ICs on boards is possible. FEATURES • Ultra-Low Supply Current ...........................................TYP. 20µA • Ultra-Low Supply Current (Standby).........................TYP. 0.1µA • High Accuracy Output Voltage ..................................±2.0% • High Ripple Rejection .................................................TYP.55dB (f=1kHz) • Low Dropout Voltage ..................................................TYP. 0.2V (IOUT=60mA) • Low Temperature-Drift Coefficient of Output Voltage........TYP. ±100ppm/˚C • Excellent Line Regulation ...........................................TYP. 0.05%/V • Output Voltage .............................................................Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V is possible (refer to Selection Guide). • Built-in Short Current Limit Circuit ...........................TYP. 50mA • Small Package ..............................................................SOT-23-5 (Mini-mold) APPLICATIONS • Power source for battery-powered equipment. • Power source for cellular phones, cameras, VCRs, camcorders, hand-held audio instruments and hand-held communication equipment. • Power source for domestic appliances. 1 RN5RZ BLOCK DIAGRAMS RN5RZ××A RN5RZ××B VDD 2 – + Vref Current Limit CE 5 3 VOUT VDD 2 – + Vref Current Limit 3 VOUT 1 GND CE 5 1 GND SELECTION GUIDE The output voltage, the active type of the chip enable circuit, the packing type, and the taping type for the ICs can be selected at the user's request. These selections can be made by designating the part number as shown below: RN5RZ × – ××← ××× Part Number } ↑ d } ↑ ↑↑ a bc Code a Setting Output Voltage (VOUT) : Contents Stepwise setting with a step of 0.1V in the range of 2.0V to 6.0V is possible. Designation of Active Type of The Chip Enable Circuit : b A : “L” active type B : “H” active type Designation of Packing Type : c A : Taping C : Antistatic bag (for Samples only) Designation of Taping Type : Ex. TR, TL (refer to Taping Specifications ; TR type is the standard direction.) d For example, the product with Output Voltage of 5.0V, Specified Polarity of Chip Enable is “H” active and Taping Type TR is designated by Part Number RN5RZ50BA-TR. 2 R N5RZ PIN CONFIGURATION • SOT-23-5 5 4 (mark side) 1 2 3 PIN DESCRIPTION Pin No. Symbol Description 1 2 3 4 5 GND VDD VOUT NC CE or CE Ground Pin Input Pin Output Pin No Connection Chip Enable Pin ABSOLUTE MAXIMUM RATINGS Symbol Item Ratings Unit VIN VCE VOUT IOUT PD Topt Tstg Input Voltage Input Voltage (CE or CE Pin) Output Voltage Output Current Power Dissipation Operating Temperature Storage Temperature 9 –0.3 to VIN +0.3 –0.3 to VIN +0.3 200 250 –40 to +85 –55 to +125 V V V mA mW ˚C ˚C ABSOLUTE MAXIMUM RATINGS Absolute Maximum ratings are threshold limit values that must not be exceeded even for an instant under any conditions. Moreover, such values for any two items must not be reached simultaneously. Operation above these absolute maximum ratings may cause degradation or permanent damage to the device. These are stress ratings only and do not necessarily imply functional operation below these limits. 3 R N5RZ ELECTRICAL CHARACTERISTICS • RN5RZ×A Series × Symbol Item Conditions MIN. TYP. MAX. Topt=25˚C Unit VOUT IOUT ∆VOUT ∆IOUT VDIF ISS Istandby ∆VOUT ∆VIN RR VIN ∆VOUT ∆Topt Ilim RPU VCEH VCEL Output Voltage Output Current VIN=VOUT+1V, IOUT=30mA VIN=VOUT+1V When VOUT=VOUT–0.1V VIN=VOUT+1V 1mA≤IOUT≤80mA IOUT=60mA VIN=VOUT+1V VIN=VCE=VOUT+1V IOUT=30mA VOUT+0.5V≤VIN≤8V f=1kHz, Ripple 0.5Vrms VIN=VOUT+1V ×0.98 100 ×1.02 V mA Load Regulation Dropout Voltage Supply Current Supply Current (Standby) Line Regulation 20 0.2 20 0.1 0.05 40 0.3 40 1.0 0.20 mV V µA µA %/V Ripple Rejection Input Voltage Output Voltage Temperature Coefficient Short Current Limit CE Pull-up Resistance CE Input Voltage “H” CE Input Voltage “L” 55 8 dB V ppm/˚C mA 10 MΩ V 0.25 V IOUT=30mA –40˚C≤Topt≤85˚C VOUT=0V 2.5 1.5 0 ±100 50 5 4 R N5RZ × • RN5RZ× B Series Symbol Item Conditions MIN. TYP. MAX. Topt=25˚C Unit VOUT IOUT ∆VOUT ∆IOUT VDIF ISS Istandby ∆VOUT ∆VIN RR VIN ∆VOUT ∆Topt Ilim RPU VCEH VCEL Output Voltage Output Current VIN=VOUT+1V, IOUT=30mA VIN=VOUT+1V When VOUT=VOUT–0.1V VIN=VOUT+1V 1mA≤IOUT≤80mA IOUT=60mA VIN=VOUT+1V VIN=VOUT+1V, VCE=GND IOUT=30mA VOUT+0.5V≤VIN≤8V f=1kHz, Ripple 0.5Vrms VIN=VOUT+1V ×0.98 100 ×1.02 V mA Load Regulation Dropout Voltage Supply Current Supply Current (Standby) Line Regulation 20 0.2 20 0.1 0.05 40 0.3 40 1.0 0.20 mV V µA µA %/V Ripple Rejection Input Voltage Output Voltage Temperature Coefficient Short Current Limit CE Pull-down Resistance CE Input Voltage “H” CE Input Voltage “L” 55 8 dB V ppm/˚C mA 10 MΩ V 0.25 V IOUT=30mA –40˚C≤Topt≤85˚C VOUT=0V 2.5 1.5 0 ±100 50 5 5 R N5RZ OPERATION RN5RZ××A RN5RZ××B VDD 2 – Error Amp. Vref Current Limit CE 5 R2 + R1 3 VOUT VDD 2 – Error Amp. Vref Current Limit R2 + R1 3 VOUT 1 GND CE 5 1 GND In these ICs, Output Voltage VOUT is detected by Feed-back Registers R1, R2, and the detected Output Voltage is compared with a reference voltage by an Error Amplifier, so that a constant voltage is output. A current limit circuit working for Short Protect and a chip enable circuit for standby function are included. TEST CIRCUITS 2 VDD VOUT 3 IOUT A C2 VIN C1 5 2 VDD VOUT 3 RN5RZ SERIES VIN C1 5 CE GND 1 C1 : 1µF C2 : 10µF RN5RZ SERIES CE GND 1 C1 : 1µF C2 : 10µF C2 Fig.1 Standard Test Circuit Fig.2 Supply Current Test Circuit 2 VDD VOUT 3 IOUT RN5RZ SERIES P .G. VIN 5 CE GND 1 C1 : 10µF C1 Fig.3 Line Transient Response Test Circuit 6 R N5RZ 2 VDD VOUT 3 RN5RZ SERIES VIN C1 5 CE GND 1 C1 : 1µF C2 : 10µF C2 l1 l2 Fig.4 Load Transient Response Test Circuit 2 VDD VOUT 3 IOUT RN5RZ SERIES VIN C1 5 CE GND 1 C1 : 1µF C2 : 10µF C2 Fig.5 Ripple Rejection Test Circuit 7 R N5RZ TYPICAL CHARACTERISTICS 1) Output Voltage vs. Output Current RN5RZ30B 3.5 3.5V 4.0V 5.0V 5.0 4.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 400 500 VIN=3.3V RN5RZ40B 4.5V VIN=4.3V 5.0V Output Voltage VOUT(V) Output Voltage VOUT(V) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 400 6.0V 500 Output Current IOUT(mA) Output Current IOUT(mA) RN5RZ50B 6.0 6.0V Output Voltage VOUT(V) 5.0 VIN=5.3V 4.0 5.5V 3.0 2.0 1.0 0.0 0 100 200 300 400 7.0V 500 Output Current IOUT(mA) 2) Output Voltage vs. Input Voltage RN5RZ30B 4.0 5.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.0 2.0 4.0 IOUT=0mA IOUT=30mA IOUT=50mA 6.0 8.0 0.0 0.0 2.0 4.0 RN5RZ40B Output Voltage VOUT(V) Output Voltage VOUT(V) 4.0 3.0 2.0 IOUT=0mA 1.0 IOUT=30mA IOUT=50mA 6.0 8.0 Input Voltage VIN(V) Input Voltage VIN(V) 8 R N5RZ RN5RZ50B 6.0 Output Voltage VOUT(V) 5.0 4.0 3.0 2.0 1.0 0.0 0.0 IOUT=0mA IOUT=30mA IOUT=50mA 2.0 4.0 6.0 8.0 Input Voltage VIN(V) 3) Dropout Voltage vs. Output Current RN5RZ30B 0.30 0.30 RN5RZ40B Dropout Voltage VDIF(V) 0.20 0.15 0.10 0.05 0.00 0 20 40 60 80 100 Topt=–40˚C Topt=25˚C Topt=85˚C Dropout Voltage VDIF(V) 0.25 0.25 0.20 0.15 0.10 0.05 0.00 0 20 40 60 80 100 Topt=–40˚C Topt=25˚C Topt=85˚C Output Current IOUT(mA) Output Current IOUT(mA) RN5RZ50B 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 20 40 60 80 100 Topt=–40˚C Topt=25˚C Topt=85˚C Dropout Voltage VDIF(V) Output Current IOUT(mA) 9 R N5RZ 4) Output Voltage vs. Temperature RN5RZ30B 3.10 4.10 RN5RZ40B Output Voltage VOUT(V) 3.05 Output Voltage VOUT(V) 0 50 100 4.05 3.00 4.00 2.95 3.95 2.90 –50 3.90 –50 0 50 100 Temperature Topt(˚C) Temperature Topt(˚C) RN5RZ50B 5.10 Output Voltage VOUT(V) 5.05 5.00 4.95 4.90 –50 0 50 100 Temperature Topt(˚C) 5) Supply Current vs. Input Voltage RN5RZ30B 30 30 RN5RZ40B Supply Current ISS(µA) 20 15 10 5 0 0.0 Supply Current ISS(µA) 2.0 4.0 6.0 8.0 25 25 20 15 10 5 0 0.0 2.0 4.0 6.0 8.0 Input Voltage VIN(V) Input Voltage VIN(V) 10 R N5RZ RN5RZ50B 30 Supply Current ISS(µA) 25 20 15 10 5 0 0.0 2.0 4.0 6.0 8.0 Input Voltage VIN(V) 6) Supply Current vs. Temperature RN5RZ30B 30 30 RN5RZ40B Supply Current ISS(µA) 20 15 10 5 0 –50 Supply Current ISS(µA) 0 50 100 25 25 20 15 10 5 0 –50 0 50 100 Temperature Topt(˚C) Temperature Topt(˚C) RN5RZ50B 30 Supply Current ISS(µA) 25 20 15 10 5 0 –50 0 50 100 Temperature Topt(˚C) 11 R N5RZ 7) Dropout Voltage vs. Set Output Voltage RN5RZ××B 0.35 Topt=25˚C IOUT=10mA IOUT=30mA IOUT=50mA IOUT=100mA Dropout Voltage VDIF(V) 0.30 0.25 0.20 0.15 0.10 0.05 0.00 2 3 4 5 6 Set Output Voltage Vreg(V) 8) Ripple Rejection vs. Frequency RN5RZ30B 80 RN5RZ30B 80 COUT=tantal 2.2µF Ripple Rejection RR(dB) COUT=tantal 4.7µF Ripple Rejection RR(dB) 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 1 10 100 1 10 100 Frequency f(kHZ) Frequency f(kHZ) RN5RZ30B 80 RN5RZ40B 80 COUT=tantal 10µF Ripple Rejection RR(dB) COUT=tantal 2.2µF Ripple Rejection RR(dB) 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 1 10 100 1 10 100 Frequency f(kHZ) Frequency f(kHZ) 12 R N5RZ RN5RZ40B 80 RN5RZ40B 80 COUT=tantal 4.7µF Ripple Rejection RR(dB) COUT=tantal 10µF Ripple Rejection RR(dB) 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 1 10 100 1 10 100 Frequency f(kHZ) Frequency f(kHZ) RN5RZ50B 80 RN5RZ50B 80 COUT=tantal 2.2µF Ripple Rejection RR(dB) COUT=tantal 4.7µF Ripple Rejection RR(dB) 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 1 10 100 1 10 100 Frequency f(kHZ) Frequency f(kHZ) RN5RZ50B 80 COUT=tantal 10µF Ripple Rejection RR(dB) 70 60 50 40 30 20 10 0 0.1 IOUT=1mA IOUT=30mA IOUT=50mA 1 10 100 Frequency f(kHZ) 13 R N5RZ 9) Ripple Rejection vs. Input Voltage (DC bias) RN5RZ30B IOUT =1mA 70 COUT=tantal 10µF 70 RN5RZ30B IOUT =10mA COUT=tantal 10µF Ripple Rejection RR(dB) Ripple Rejection RR(dB) 60 50 40 30 20 10 0 3.1 3.2 3.3 f=400Hz f=1kHz f=10kHz 3.4 3.5 60 50 40 30 20 10 0 3.1 3.2 3.3 f=400Hz f=1kHz f=10kHz 3.4 3.5 Input Voltage VIN(V) Input Voltage VIN(V) RN5RZ30B IOUT =50mA 70 COUT=tantal 10µF Ripple Rejection RR(dB) 60 50 40 30 20 10 0 3.1 3.2 3.3 f=400Hz f=1kHz f=10kHz 3.4 3.5 Input Voltage VIN(V) 10) Line Transient Response tr=tf=5µS COUT=Ceramic 2.2µF+ESR 1Ω 3.4 6 Input Voltage 5 4 Output Voltage 3 2 1 0 100 Output Voltage VOUT(V) 3.3 3.2 3.1 3.0 2.9 2.8 –10 0 10 20 30 40 50 60 70 80 90 Time t(µS) 14 Input Voltage VIN(V) R N5RZ tr=tf=5µS COUT=Tantal 3.3µF 3.4 6 Input Voltage 5 4 Output Voltage 3 2 1 0 100 Output Voltage VOUT(V) 3.3 3.2 3.1 3.0 2.9 2.8 –10 0 10 20 30 40 50 60 70 80 90 Time t(µS) tr=tf=5µS COUT=Tantal 10µF 3.4 6 Input Voltage 5 4 Output Voltage 3 2 1 0 100 Output Voltage VOUT(V) 3.3 3.2 3.1 3.0 2.9 2.8 –10 0 10 20 30 40 50 60 70 80 90 Time t(µS) 11) Load Transient Response COUT=Ceramic 2.2µF+ESR 1Ω 3.4 150 Output Current 100 50 Output Voltage 0 –50 –100 –150 100 Input Voltage VIN(V) Output Current IOUT(mA) Output Voltage VOUT(V) 3.3 3.2 3.1 3.0 2.9 2.8 –10 0 10 20 30 40 50 60 70 80 90 Time t(µS) Input Voltage VIN(V) 15 R N5RZ COUT=Tantal 2.2µF 3.4 150 Output Current 100 50 Output Voltage 0 –50 –100 –150 100 Output Voltage VOUT(V) 3.3 3.2 3.1 3.0 2.9 2.8 –10 0 10 20 30 40 50 60 70 80 90 Time t(µS) COUT=Tantal 3.3µF 3.4 150 Output Current 100 50 Output Voltage 0 –50 –100 –150 100 Output Voltage VOUT(V) 3.3 3.2 3.1 3.0 2.9 2.8 –10 0 10 20 30 40 50 60 70 80 90 Time t(µS) COUT=Tantal 10µF 3.4 150 Output Current 100 50 Output Voltage 0 –50 –100 –150 100 Output Voltage VOUT(V) 3.3 3.2 3.1 3.0 2.9 2.8 –10 0 10 20 30 40 50 60 70 80 90 Time t(µS) 16 Output Current IOUT(mA) Output Current IOUT(mA) Output Current IOUT(mA) R N5RZ FOR STABLE OPERATION • Countermeasure for Noise 2 VIN VOUT 3 Ceramic Capacitor S.A. Spectrum Analyzer IOUT Ceramic capacitor 0.01µF RN5RZ SERIES VIN 5 CE GND 1 ESR Measuring circuit for white noise ; RN5RZ30B The relation between output current (IOUT) and Equivalent Series Resistance (ESR) in the output capacitor are described below. The conditions when the noise level is under 40µV (Avg.) are marked as the hatched area in the graph. [Measuring conditions] Frequency band : 0Hz to 1MHz Temperature : 25˚C Ceramic Capacitor 1µF 100.0 : Noise level is under 40µV 100.0 Ceramic Capacitor 2.2µF : Noise level is under 40µV 10.0 10.0 ESR(W) 1.0 ESR(W) 20.0 40.0 60.0 80.0 100.0 1.0 0.1 0.1 0.0 0.0 0.0 0.0 20.0 40.0 60.0 80.0 100.0 Output Current IOUT(mA) Output Current IOUT(mA) 17 R N5RZ Ceramic Capacitor 4.7µF 100.0 : Noise level is under 40µV 100.0 Ceramic Capacitor 10µF : Noise level is under 40µV 10.0 10.0 ESR(W) ESR(W) 1.0 1.0 0.1 0.1 0.0 0.0 20.0 40.0 60.0 80.0 100.0 0.0 0.0 20.0 40.0 60.0 80.0 100.0 Output Current IOUT(mA) Output Current IOUT(mA) APPLICATION HINTS When using these ICs, be sure to take care regarding the following points : • In these ICs, phase compensation is made for securing stable operation even when the load current is varied. For this purpose, be sure to use a capacitor COUT with good frequency characteristics and ESR in the range described above. • Make VDD and GND line sufficient. When the impedance of these is high, the noise may be picked up or operation may become unstable. • Connect the capacitor with a capacitance of about 1µF between VDD and GND with wiring as short as possible. • Set external components as close as possible to the ICs and make wiring short. 18 R N5RZ POWER DISSIPATION The power dissipation of RN5RZ series (SOT-23-5) is measured. The measuring conditions as follows: 15.0 Material : glass cloth epoxy plastic 15 1.6mm Size of the board : 15× × Wind velocity : 0m/s Mounted with solder 1.0 1.3 0.7 15.0 1.0 Unit : mm RN5RZ30B(SOT-23-5) 450 Power Dissipation PD(mW) 400 350 300 250 200 150 100 50 0 0 25 50 75 100 125 150 Free air Mounted on the board Ambient Temperature Topt(˚C) 19 R N5RZ PACKAGE DIMENSION (Unit : mm) • SOT-23-5 2.9±0.2 1.9±0.2 (0.95) (0.95) +0.2 1.1 –0.1 0.2 MIN. 0 to 0.1 4.0±0.1 2.0±0.05 1.75±0.1 3.5±0.05 3.2 3.3 4.0±0.1 2.0MAX. 0.8±0.1 4 2.8±0.3 5 1 2 0.4±0.1 3 +0.1 0.15 –0.05 TAPING SPECIFICATION (Unit : mm) • SOT-23-5 ø 1.5+0.1 –0 0.3±0.1 +0.2 1.6 –0.1 TR User Direction of Feed. TL 20 8.0±0.3 RICOH COMPANY, LTD. ELECTRONIC DEVICES DIVISION HEADQUARTERS 13-1, Himemuro-cho, Ikeda City, Osaka 563-8501, JAPAN Phone 81-727-53-1111 Fax 81-727-53-6011 YOKOHAMA OFFICE (International Sales) 3-2-3, Shin-Yokohama, Kohoku-ku, Yokohama City, Kanagawa 222-8530, JAPAN Phone 81-45-477-1697 Fax 81-45-477-1694 • 1695 http://www.ricoh.co.jp/LSI/english/ RICOH CORPORATION ELECTRONIC DEVICES DIVISION SAN JOSE OFFICE 3001 Orchard Parkway, San Jose, CA 95134-2088, U.S.A. Phone 1-408-432-8800 Fax 1-408-432-8375
RN5RZ40BC-TR 价格&库存

很抱歉,暂时无法提供与“RN5RZ40BC-TR”相匹配的价格&库存,您可以联系我们找货

免费人工找货