SML-110FTT86N

Data Sheet SML-11Series 3020 1208） （ 3.0×2.0mm t=1.6mm） （ Features ・ Side-viewwithreflectortype ・ ×2.0mmt=1.6mm 3.0 Color T  ype L M V F D P Y W Specifications PartNo. ■ SML-110VT ■ SML-110DT ■ SML-110YT ■ SML-110MT ■ SML-110FT ■ SML-110PT AbsoluteMaximumRatings(Ta＝25℃) ElectricalandOpticalCharacteristics(Ta＝25℃) Chip Emitting Power ForwardVoltageVF ReverseCurrentIR DominantWavelengthλD LuminousIntensityIV Forward PeakForward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Max. Min.*2 Typ. Max.*2 Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) Red GaAsP onGaP Orange Yellow Yellowish Green GaP Green Green 70 25 60＊1 4 -30to+85 -40to+85 2.0 2.1 625 602 20 100 4 587 569 562 557 630 605 590 572 565 560 635 608 593 575 568 563 20 2.2 3.6 2.2 5.6 3.6 2.2 6.3 10 6.3 16 10 6.3 20 2.2 ＊1:Duty1/5,200Hz/＊2:Reference Dimensions 3.0 2.3 1.6 0.3 0.8 Recommended Solder Pattern Viewing Angle SML-11 Series 1.5 X-Y ANGULAR DISPLACEMENT(deg) 30° 40° 50° 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 50 0 50 90° 100 Directivity(deg) X’ - Y’ ANGULAR DISPLACEMENT(deg) 30° 40° 50° 60° 70° 80° 90° 100 50 0 50 20° 10° 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 100 Directivity(deg) 2.0 1.6 60° 1.8 70° 80° 90° 100 Cathode mark Emitting Direction RELATIVE INTENSITY(%) RELATIVEINTENSITY(%) RELATIVE INTENSITY(%) RELATIVEINTENSITY(%) 4-R0.4 1.8 LED 0.3 1.6 2.8 Terminal Tolerance:±0.2 （unit:mm） （unit:mm） © 2010 ROHM Co., Ltd. All rights reserved. www.rohm.com 1/3 1.8 1.4 2010.12 - Rev.A SML-11 Series Electrical Characteristics Curves Forward Current-Forward Voltage 100 Ta=25°C ■ ■ ■ FORWARD CURRENT：IF (mA) ■SML-110VT ■SML-110DT ■SML-110YT ■SML-110MT ■SML-110FT ■SML-110PT 10 1 1.0 1.5 2.0 2.5 3.0 FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature 1.6 RELATIVE LUMINOUS INTENSITY (a.u) 1.4 1.2 1.0 0.8 0.6 0.4 -40 IF=20mA ■  ■SML-110VT ■ ■SML-110DT ■SML-110YT ■SML-110MT ■ ■SML-110FT ■SML-110PT -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current 1.5 f=1kHz ■ RELATIVE LUMINOUS INTENSITY (a.u) 1.0 ■SML-110VT ■SML-110DT ■SML-110YT ■SML-110MT ■SML-110FT ■SML-110PT 0.5 0.0 0 FORWARD CURRENT：IF (mA) 5 10 15 20 25 30 Derating ■ MAXIMUM FORWARD CURRENT：IF (mA) 40 30 ■SML-110VT ■SML-110DT ■SML-110YT ■SML-110MT ■SML-110FT ■SML-110PT 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) © 2010 ROHM Co., Ltd. All rights reserved. www.rohm.com 2/3 2010.12 - Rev.A SML-11 Series Rank Reference of Brightness Red (V) Luminous G H J K L M Intensity Package size(mm) Height(mm) (mcd) 1.0to1.6 1.6to2.5 2.5to4.0 4.0to6.3 6.3to10 10to16 N （Ta=25˚C,IF＝20mA） P Q 25to40 40to63 16to25 SideView (reflector) 3020 1.6 SML-110VT Orange (D) Luminous G H J K L M Intensity Package size(mm) Height(mm) (mcd) 1.0to1.6 1.6to2.5 2.5to4.0 4.0to6.3 6.3to10 10to16 N （Ta=25˚C,IF＝20mA） P Q 25to40 40to63 16to25 SideView (reflector) 3020 1.6 SML-110DT Yellow (Y) Luminous G H J K L M Intensity Package size(mm) Height(mm) (mcd) 1.0to1.6 1.6to2.5 2.5to4.0 4.0to6.3 6.3to10 10to16 N （Ta=25˚C,IF＝20mA） P Q 25to40 40to63 16to25 SideView (reflector) 3020 1.6 SML-110YT Green (M, P, F) （Ta=25˚C,IF＝20mA） Luminous F G H J K L M N P Q Intensity Package size(mm) Height(mm) (mcd) 0.63to1.0 1.0to1.6 1.6to2.5 2.5to4.0 4.0to6.3 6.3to10 10to16 16to25 25to40 40to63 3020 1.6 SML-110MT SML-110FT SML-110PT SideView (reflector) Part No. Construction SML Series name 110 Package type M V D Y M F P T T86 T Transparent Colorless N Rank sign (Brightness Rank)∗ Chip Type Emitting Color Resin Color Taping Specifications 0 Standard Type Red:630nm Orange:605nm Yellow:587(590)nm Yellowish-Green:572nm Green:564nm Green:560nm T86 Cathode at sprocket hole side T87 Reverse of T86 ∗ Concerning the Brightness rank • Please refer to the rank chart above for luminous intensity classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHMLEDproductsarebeingshippedwithdesiccant(silicagel)concludedinmoisture-proofbags. Pastingthemoisturesensitivelabelontheoutersurfaceofthemoisture-proofbagsorenclosingthehumidityindicationcardinsidethebagisavailableuponrequest. Pleasecontactthenearestsalesofficeordistributerifnecessary. © 2010 ROHM Co., Ltd. All rights reserved. www.rohm.com 3/3 2010.12 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A