SML-811UTT86

SML-811WT(A) Data Sheet SML-81series 3412(1305) 3.4×1.25mm(t=1.1mm) Features ・Reverse-mountavailabletype Color Type V U D Y W M B Specifications PartNo. AbsoluteMaximumRatings(Ta＝25℃) ElectricalandOpticalCharacteristics(Ta＝25℃) Chip Emitting Power ForwardVoltageVF ReverseCurrentIR DominantWavelengthλD LuminousIntensityIV Forward PeakForward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Min.*3 Typ. Max.*3 Max. Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) Typ.(V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) ■ SML-811VT(A) ■ SML-811DT(A) ■ SML-811WT(A) Orange 100＊2 62 5 -40to+85 -40to+100 1.95 10 5 25 636 625 602 605 608 587 590 593 11 22 11.2 22.4 14 28 18 10 10 Yellow 100 ■ SML-812MT GaP Yellowish Green 2.1 60＊1 65 4 -30to+85 -40to+85 20 584 587 590 9 569 572 575 14 40 567 570 573 5.6 16 464 470 476 22 56 4 2.2 20 ■ SML813BC8T ■ SML812BCT 630 620 AIGaInP ■ SML-811YT(A) ■ SML-810MT 625 615 Red ■ SML-811UT(A) 87 InGaN Blue 20 -40to+85 100＊2 -40to+100 3.3 80 -30to+85 20 5 5 5 -40to+85 20 ＊1:Duty1/5,200Hz/＊2：Duty1/10,1kHz/＊3：Reference Dimensions Recommended Solder Pattern Viewing Angle SML-81 series SCANNING ANGLE (deg) SCANNINGANGLE(deg) X’ 20° Y’ 10° 0° 10° SCANNING ANGLE (deg) SCANNINGANGLE(deg) 20° 30° X 30° 40° 50° 50 60° 70° 80° 90° 100 90° 100 RELATIVE INTENSITY (%) RELATIVEINTENSITY(%) 4.2 30° 80° 50 0 SML81 series X’ Y’ 30° 20° 10° 0° 10° 20° X’ 80° 80° www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 1/3 0 10° 0° 10° 20° 30° 50 RELATIVE INTENSITY (%) RELATIVEINTENSITY(%) 40° 50° 60° 60° 70° 50 20° 50° 60° 70° (unit:mm) 30° 40° 50° 50° 90° 100 Y’ 40° 60° Tolerance:±0.1 (unit:mm) SML812BCT SML813BC8T SCANNING ANGLE (deg) SCANNINGANGLE(deg) 30° 40° 1.25 90° 100 50 RELATIVE INTENSITY (%) RELATIVEINTENSITY(%) SCANNING ANGLE (deg) SCANNINGANGLE(deg) φ2.4 20° 70° 80° 80° 0 10° 60° 70° 70° 50 0° 50° 60° 60° 90° 100 10° 30° 40° 50° 50° Hole 20° Y 40° 40° 90° 100 70° 70° 80° 80° 90° 100 50 0 50 90° 100 RELATIVE INTENSITY (%) RELATIVEINTENSITY(%) 2012.11 - Rev.D SML-81 series Electrical Characteristics Curves Forward Current-Forward Voltage FORWARD CURRENT：IF (mA) ■ ■SML-811VT(A) ■SML-811UT(A) ■SML-811DT(A) ■SML-811WT(A) ■SML-811YT(A) 10 1 1.0 1.5 2.0 2.5 Ta=25°C 100 FORWARD CURRENT : IF (mA) Ta=25°C 100 10 1 1.5 3.0 ■ ■SML-812MT ■SML-810MT ■ ■SML812BCT ■SML813BC8T 2.0 2.5 3.0 3.5 FORWARD VOLTAGE : VF (V) FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature ■ RELATIVE LUMINOUS INTENSITY (a.u.) 1.4 ■SML-811VT(A) ■SML-811UT(A) ■SML-811DT(A) ■SML-811WT(A) ■SML-811YT(A) 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 IF=20mA 1.6 RELATIVE LUMINOUS INTENSITY (a.u.) IF=10mA 1.6 100 ■ ■ 1.4 ■SML-812MT ■SML-810MT ■SML812BCT ■SML813BC8T 1.2 1.0 0.8 0.6 0.4 -40 -20 -0 20 40 60 80 100 ATMOSPHERE TEMPERATURE : Ta (°C) ATMOSPHERE TEMPERATURE：Ta (°C) Ta=25°C 2.5 ■ 2.0 ■SML-811VT(A) ■SML-811UT(A) ■SML-811DT(A) ■SML-811WT(A) ■SML-811YT(A) 1.5 1.0 0.5 0 0 5 10 15 20 FORWARD CURRENT：IF (mA) Ta=25°C 1.5 RELATIVE LUMINOUS INTENSITY (a.u.) RELATIVE LUMINOUS INTENSITY (a.u.) Luminous Intensity-Forward Current 25 ■ ■ ■SML-812MT ■SML-810MT ■SML812BCT ■SML813BC8T 1.0 0.5 0 0 5 10 15 20 25 FORWARD CURRENT : IF (mA) Derating ■SML-811VT(A) ■SML-811UT(A) ■SML-811DT(A) ■SML-811WT(A) ■SML-811YT(A) ■ MAXIMUM FORWARD CURRENT : IF (mA) MAXIMUM FORWARD CURRENT：IF (mA) ■ 30 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERTURE：Ta (°C) www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 30 ■ ■SML-812MT ■SML-810MT ■SML812BCT ■SML813BC8T 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERTURE : Ta (°C) 2/3 2012.11 - Rev.D SML-81 series Rank Reference of Brightness Red (V, U) Package structure Package Height (mm) size Luminous Intensity (mcd) IF(mA) ReverseMount 34125 1.1 10 AH AJ AK AL AM AN AP AQ AR AS AT AU AV AW AX AG 9.0to11.2 11.2to14 14to18 18to22.4 22.4to28 28to35.5 35.5to45 45to56 56to71 71to90 90to112 112to140 140to180 180to224 224to280 280to355 SML-811VT(A)＊ SML-811UT(A)＊ Orange (D) Package structure Package Height (mm) size ReverseMount 34125 1.1 Luminous Intensity (mcd) AH AJ AK AL AM AN AP AQ AR AS AT AU AV AW AX AG 9.0to11.2 11.2to14 14to18 18to22.4 22.4to28 28to35.5 35.5to45 45to56 56to71 71to90 90to112 112to140 140to180 180to224 224to280 280to355 SML-811DT(A)＊ Luminous Intensity (mcd) AH AJ AK AL AM AN AP AQ AR AS AT AU AV AW AX AG 9.0to11.2 11.2to14 14to18 18to22.4 22.4to28 28to35.5 35.5to45 45to56 56to71 71to90 90to112 112to140 140to180 180to224 224to280 280to355 SML-811WT(A)＊ SML-811YT(A)＊ IF(mA) 10 Yellow (W, Y) Package structure Package Height (mm) size IF(mA) ReverseMount 34125 1.1 10 Green (M) Package structure Package Height (mm) size Luminous Intensity (mcd) IF(mA) ReverseMount 34125 1.1 10 H J K L M N P Q R S T U V W X G 1.0to1.6 1.6to2.5 2.5to4.0 4.0to6.3 6.3to10 10to16 16to25 25to40 40to63 63to100 100to160 160to250 250to400 400to630 630to1000 1000to1600 ※ SML-810MT SML-812MT※ Blue (B) Package structure Package Height (mm) size Luminous Intensity (mcd) IF(mA) ReverseMount 34125 1.1 H J K L G 0.9to1.4 1.4to2.2 2.2to3.6 3.6to5.6 5.6to9 M N P Q 9to14 14to22 22to36 36to56 R S T U V W X 56to90 90to140 140to220 220to360 360to560 560to900 900to1400 SML813BC8T SML812BCT 20 ＊Pleasenotethatthebrightnessofsomeproductsmayfallbetweenranks(halfrank). ※Brightnessonspecificationsheetincludetoleranceofwithin±10%. Part No. Construction ∗ “−” will be taken out for emitting color B/E series and pastel color. S M L Series name Special classification code 8 1 1 Package name T 8 6 U T Chip Type Emitting Color Resin Color Standard Type V Red:630nm T Transparent Colorless 1 Low Current Type U Red:620nm W MilkyWhite D Orange:605nm C Orange:603nm 2 High Brightness Type 6 AL Rank sign (Brightness Rank)∗ Taping Specifications 0 3 A Rank sign (Chromaticity Rank)∗ (for pastel color) T86 Cathode at sprocket hole side T68 (3,000pcs / real) T96 Cathode at sprocket hole side (10,000pcs / real) W Yellow:590nm Y Yellow:587nm M Yellowish-Green:572nm P Green:560nm B Blue:470nm ∗ Concerning the Brightness rank • Please refer to the rank chart above for luminous intensity classification. • Please refer to the Specification sheet for color classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. ∗ Please refer to the Specification sheet about Taping specification. Packing Specification ROHMLEDproductsarebeingshippedwithdesiccant(silicagel)concludedinmoisture-proofbags. Pastingthemoisturesensitivelabelontheoutersurfaceofthemoisture-proofbagsorenclosingthehumidityindicationcardinsidethebagisavailableuponrequest. Pleasecontactthenearestsalesofficeordistributerifnecessary. www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. 3/3 2012.11 - Rev.D Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2012 ROHM Co., Ltd. All rights reserved. R1102A