SMLA12WBC7W

Side View Chip LEDs 0605 Side View White InGaN on SiC 1611(0605) 1.6×1.15(t=0.55) Part No. note) "-" will be taken out for emitting color B/E series. SMLA12WBC7W Absolute Maximum Ratings (Ta=25°C) Power Part No. Emitting dissipation color PD Dimensions (Unit:mm) 1.6 1.2 0.55 1.1 CATHODE INDEX (mW) SMLA12WBC7W :Duty 1/10 1kHz Peak Forward Reverse Operating Storage forward current voltage temperature temperature current IF VR Topr Tstg IFP (mA) (V) (°C) (°C) (mA) 20 100 5 -30 to +85 -40 to +100 White 66 Electrical Optical Characteristics (Ta=25°C) Forward voltage VF Typ. (V) SMLA12WBC7W IF (mA) 5 Part No. Resin Reverse current IR Max. (µA) 100 VR (V) 5 Brightness IV Min. ( mcd) Chromaticity coordinates Terminal Typ. IF (mcd) (mA) 56 5 x 0.30 y 0.30 IF (mA) 5 Phosphor included 2.9 22 Tolerance:±0.1 Chromaticity Diagram 0.4 Directivity (Typ.) Angular Displacement (deg) X Y 0° 30° 30° C 60° 60° K CIE y F 0.3 H A 90° 100 50 0 50 90° 100 RELATIVE LUMINOUS INTENSITY (%) Angular Displacement (deg) 0° X’ Y’ 30° 0.2 0.2 0.3 0.4 CIE x Chromaticity Coordinates (Ta=25˚C, IF=5mA) A x 0.280 0.296 0.283 0.264 y 0.248 0.276 0.305 0.267 x 0.283 0.304 0.307 0.287 F y 0.305 0.330 0.315 0.295 x 0.287 0.307 0.311 0.296 H y 0.295 0.315 0.294 0.276 x 0.304 0.330 0.330 0.311 K y 0.330 0.360 0.318 0.294 x 0.330 0.356 0.361 0.330 C y 0.318 0.351 0.385 0.360 60° 0.68 30° 1.15 60° 90° 100 90° 100 50 0 50 RELATIVE RELATIVE LUMINOUS INTENSITY (%) Measurement tolerance:±0.02 Recommended Pad Layout 1.2 Packaging Specifications (Unit:mm) Tape Specifications:1 Feeding direction 4± 0.1 2± 0.05 1.75±0.1 Reel Specifications 0.9 1.2 φ 13 φ 1.5 +0.1 0 3.5± 0.05 1.85 (Unit:mm) The recommended thickness of the screen mask for soldering is more than 150µm. The hole size of the screen mask should be same as the recommended land pattern or smaller. 1.35 0 to 0.5 5.5 8 0.7 Label Position 11.4±1 Tolerance:±0.2 Tolerance:±0.2 Rev.A φ 180 −0 3 φ 60 +1 0 1.2 Electrical Characteristic Curves Forward Current - Forward Voltage 100.0 FORWARD CURRENT : IF (mA) Relative Luminous Intensity - Case Temperature SMLA12WBC7W 1.6 RELATIVE LUMINOUS INTENSITY IF=5mA 1.4 1.2 1 SMLA12WBC7W Ta=25°C 10.0 0.8 0.6 0.4 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 CASE TEMPERATURE : Tc (°C) 1.0 2.8 2.9 3.0 3.1 3.2 FORWARD VOLTAGE : VF (V) Relative Luminous Intensity - Forward Current 10.00 Ratio of Maximum Tolerable Peak Current - Pulse Duration SMLA12WBC7W RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT 10 300Hz 100Hz 10kHz Ta=25°C SMLA12WBC7W RELATIVE LUMINOUS INTENSITY 5 1.00 0.10 0 5 10 15 20 1 1 10 100 1000 10000 FORWARD CURRENT : IF (mA) PULSE DURATION : Tw (µs) Derating MAXIMUM FORWARD CURRENT : IF Max. (mA) 30 SMLA12WBC7W 20 10 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 09 100 AMBIENT TEMPERATURE : Ta (°C) 3kHz 1kHz Rev.A Appendix Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2009 ROHM Co.,Ltd. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster @ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix-Rev4.1