1#
Preliminary Data Sheet Rev.0.2 2018. 7. 4
LED Driver
Outdoor 50W Driver
SL-LA1425002US
SL-LA1425003US
Constant Current LED Driver
Features& Benefits
Output Current Range:
Output Voltage Range:
1400mA Fixed
18 ~ 36Vdc
Output Power Range:
Dimming Control:
Input Voltage:
Max 50 W
0-10 V
120 ~ 277 Vac, 50/60 Hz
Safety:
UL / cUL(UL 8750, UL Class 2)
EMI:
FCC Part 15 Class B
Protections:
ta Range:
Short Circuit, Over Voltage Protection
-40 ~ +70 °C
Expected lifetime:
Environmental Compliance:
50,000 hours at tc < 75 °C
RoHS
Long lasting & high reliability
Metal housing
Applications
Outdoor lighting
2
Table of Contents
1.
Characteristics
-----------------------
3
2.
Typical Characteristics Graphs
-----------------------
5
3.
Protection
-----------------------
8
4.
Dimming Specification
-----------------------
8
5.
Reliability& standard
-----------------------
9
6.
Outline Drawing & Dimension
-----------------------
10
7.
Label Structure
-----------------------
11
8.
Packing Structure
-----------------------
11
9.
Precautions in Handling & Use
-----------------------
12
3
1. Characteristics
Specification
Article
Symbol
Unit
Min.
Typ.
Note
Max.
INPUT SPECIFICATIONS
Nominal Voltage
Vin
Nominal Frequency
Fin
120
277
50 / 60
Vac
Hz
At 110 Vac
Iin
0.7
A
At full load
At 277 Vac
Iin
0.3
A
At full load
THD
20
%
At 120-277 Vac
-
1) At 120-277 Vac
%
2) 110Vac/ 60 Hz, 100% Load
Input Current
Total Harmonic Distortion
Power Factor
Efficiency
PF
0.9
η
86
88
86
88
In-rush Current
277Vac/ 60 Hz, 100% Load
50
Apk
@ 277Vac input, 25℃ Cold start.
36
Vdc
80% of MAX power can meet PF,THD
50
Vdc
Open circuit, No-load protection
No Hot plug protection
1470
mA
0-10 Fixed current
OUTPUT SPECIFICATIONS
Voltage Range
Vo
18
Max. Voltage
Current Range
Io
1330
1400
Nominal Power
Po
50
W
Turn-on Delay Time
Td
1
s
1)
PF, THD can meet the electrical performance from 80% of MA X power.
2)
Measured the unit is thermally stabilized after half an hour, Ta 25℃.
4
Specification
Article
Symbol
Unit
Min.
Typ.
Note
Max.
DIMMING SPECIFICATIONS
Vdc
0
10
V
Dimming voltage
1
8.5
V
-40
70
ºC
20
95
%
-40
85
ºC
10
95
%
88.9
ºC
L/N
±4
kV
LN / GND
±6
kV
See Dimming Specification section
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
ta
Operating Humidity
Storage Temperature
ts
Storage Humidity
Case Temperature
tc
Not condensing
Not condensing
Surge Transient
Protection
IP Rating
IP67
Expected Lifetime (e-cap)
50,000
MTBF
Dimensions
Net Weight
-
Suitable for indoor environment
h
At tc = 75ºC, full load, 120-277 Vac
measured at full load,25℃ ambient
temperature
300,000
L xW xH
193 x 42.5 x 34.5
mm
550
g
5
2. Typical Characteristics Graphs
a) Efficiency vs. Load
b) Power Factor vs. Load
c) Total Harmonic Distortion vs. Load
d) Lifetime vs. Tc
e) Ta de-rating according to the load condition
3. Protection
a) Output Short Circuit Protection
The unit is protected when output is short thus avoiding safety hazard, shock hazard and damage to the unit.
After the short circuit fault condition is removed, the unit will enter the auto-recovery mode.
b) Output Over Voltage Protection
When no load condition occurs, the unit will clamp output voltage to the OVP Voltage avoiding damage to the unit ( Vout < 50V ).
After the load is connected, the unit will enter the auto-recovery mode.
6
4. Dimming Specification
The unit has Analog Dimming (AD) function, using 0-10 Vdc. The typical dimming curve is shown below.
ARTICLE
SYMBOL
UNIT
MIN
TYP.
MAX
Range
Vdc
1
-
8.5
Dim OFF
-
-
REMARKS
No Off mode
Dimming
Dim. MIN
Vdc
1
Dim. MAX
Vdc
8.5
10
5. Reliability& Standards
Test Items and Conditions
Test Item
Specification
Condition
Leakage Current
< 0.7 mA
Vin=300V Fin=60Hz
Earth Continuity
< 0.5 Ω
According to IEC/EN 61347
Input – Output
3750 Vac, 60 s, cut-off current 10 mA
100 % tested in production line
Input – F.G
1857 Vac, 60 s, cut-off current 10 mA
100 % tested in production line
Output – F.G
1500 Vac, 60 s, cut-off current 10 mA
100 % tested in production line
Input – Output
500 Vdc, 60 s, insulation resistance 10 MΩ
100 % tested in production line
L/N
±4 kV
LN / GND
±6 kV
Contact
±8 kV
Air
±15 kV
Hi-Pot
Insulation Resistance
Surge
According to IEC/EN 61000-4-5
ESD
According to IEC 61000-4-2
Recommend to install the SPD device to prevent the unexpected damage to the luminaire.
7
Safety, EMI and EMC
International Standard
Certification
IEC/EN Safety Standards for LED Lighting
IEC/EN 61347-1, IEC/EN 61347-2-13
UL Safety Standards (Class 2 Output)
UL 8750, UL1310 Class 2
CAN/CSA-C22.2 No. 250.13-12
CAN/CSA-C22.2 No.107.1-01
Conducted and Radiated Emission Test
FCC Part 15 Class B
Harmonic current emissions: Class C
IEC/EN 61000-3-2
Voltage Fluctuations and Flicker
IEC/EN 61000-3-3
Electrostatic Discharge (ESD) Contact 8kV, Air 15kV
IEC/EN 61000-4-2
Radio-frequency Electromagnetic Fields
IEC/EN 61000-4-3
Electrical Fast Transients (EFT)
IEC/EN 61000-4-4
Surges: Differential 4kV, Common 6kV
IEC/EN 61000-4-5
Injected Currents, Conducted disturbances induced by Radio-Frequency fields
IEC/EN 61000-4-6
Power Frequency Magnetic Fields
IEC/EN 61000-4-8
Voltage Dips and Short Interruptions ( Class B )
IEC/EN 61000-4-11
6. Outline Drawing & Dimension
a) SL-LA1425002US
Dimension :193 (L) x 42.5 (W) x 34.5 (H) Unit: mm
8
Input harness
WIRE
1
2
3
SYMBOL
L
N
FG
COLOR
Black
White
Green
DESCRIPTION
Live
Neutral
GND
Cable
SJTW PVC,18AWG
Output harness
WIRE
SYMBOL
COLOR
DESCRIPTION
1
10V
Yellow
Auxiliary 10V
2
Dim+
Purple
External Dimming Input Port(0~10V)
3
Dim-
Grey
External Dimming Input Port(Ground)
4
V+
Red
Positive(Anode)LED output +
5
V-
Blue
Negative(Cathode)LED output -
Cable
UL 2517,22AWG
SJTW
PVC,18AWG
9
b) SL-LA1425003US
Dimension :193 (L) x 42.5 (W) x 34.5 (H) Unit: mm
Input harness
WIRE
1
2
3
SYMBOL
L
N
FG
COLOR
Black
White
Green
DESCRIPTION
Live
Neutral
GND
Cable
SJTW PVC,18AWG
Output harness
WIRE
SYMBOL
COLOR
DESCRIPTION
1
10V
Yellow
Auxiliary 10V
2
Dim+
Purple
External Dimming Input Port(0~10V)
3
Dim-
Grey
External Dimming Input Port(Ground)
4
V+
Red
Positive(Anode)LED output +
5
V-
Blue
Negative(Cathode)LED output -
Cable
UL 2517,22AWG
SJTW
PVC,18AWG
10
7. Label Structure
For SL- LA1425002US
For SL- LA1425003US
11
8. Packing Structure
Dimension (mm)
Packing material
Max. quantity (pcs)
Length
Width
Height
Outer Box
20
300
240
255
Pallet
1280 (64 outer boxes)
1,219
1,016
1152
9. Precautions in Handling & Use
1) To prevent the LED Driver from any defect, please handle and store it with care
Do not drop or give shock
Do not store in very humid location or at extreme temperature
Do not open or disassemble the product
2) Static electricity or surge voltage may damage the components inside LED Driver, as such please observe proper antielectrostatic working process
People handing the Driver should be well grounded (e.g. using ESD wrist band) and wear anti-static working
clothes and gloves
All related devices and instruments in the production line should be well grounded (e.g. working table, measuring
equipment, assembly jigs)
3) Observe the correct polarity of output terminal
4) Avoid input voltage exceeds the maximum rating, which will cause damage to the circuit and result in malfunction
12
Legal and additional information.
About Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd. inspires the world and shapes the future with
transformative ideas and technologies that redefine the worlds of TVs, smartphones,
wearable devices, tablets, cameras, digital appliances, printers, medical equipment,
network systems, and semiconductor and LED solutions. We are also leading in the
Internet of Things space with the open platform SmartThings, our broad range of smart
devices, and through proactive cross-industry collaboration. We employ 319,000 people
across 84 countries with annual sales of US $196 billion. To discover more, and for the
latest news, feature articles and press material, please visit the Samsung Newsroom at
news.samsung.com
Copyright © 2016 Samsung Electronics Co., Ltd. All rights reserved.
Samsung is a registered trademark of Samsung Electronics Co., Ltd.
Specifications and designs are subject to change without notice. Non-metric
weights and measurements are approximate. All data were deemed correct
at time of creation. Samsung is not liable for errors or omissions. All brand,
product,service names and logos are trademarks and/or registered trademarks
of theirrespective owners and are hereby recognized and acknowledged.
Samsung Electronics Co., Ltd.
95, Samsung 2-ro
Giheung-gu
Yongin-si, Gyeonggi-do, 446-711
KOREA
www.samsungled.com