KD40F40

DIODE MODULE DD40F/KD40F UL;E76102 M） （ Power Diode Module DD40F series are designed for various rectifier circuits. DD40F has two diode chips connected in series in 25mm (1inch) width package and the mounting base is elctrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 1,600V is avaiable for various input voltage. ● Isolated ● Two 2- 6 20 20 92 20 DD ３ ２ ２ ３ １ １ 80±0.2 KD Unit：a ■Maximum Ratings Symbol VRRM VRSM Item Repetitive Peak Reverse Voltage Non-Repetitive Peak Reverse Voltage Ratings DD40F40 400 480 DD40F80 800 960 （Tj＝25℃ unless otherwise specified） DD40F120 1200 1300 DD40F160 1600 1700 Unit V V Symbol IF AV） （ IF (RMS) IFSM I2t VISO Tj Tstg Item Average Forward Current R.M.S. Forward Current Surge Forward Current I2t Junction Temperature Storage Temperature Mounting Torque Mass Mounting M5） （ Terminal M5） （ Conditions Single phase, half wave, 180° conduction, Tc：96℃ Single phase, half wave, 180° conduction, Tc：96℃ 1 cycle, ／ 2 Ratings 40 62 1200/1300 7200 2500 −40 to ＋125 −40 to ＋125 6.5 （Applications） Various rectifiers, Battery chargers, DC motor drives 31max 19.5 4.0 mounting base elements in a package for simple (single and three phase) bridge connections ● Highly reliable glass passivated chips ● High surge current capability 25 12.5 12 M5X10 Unit A A A A2S ℃ ℃ V N･m （㎏f･B） g 50/60HZ, peak Value, non-repetitive Value for one cycle of surge current Isolation Breakdown Voltage R.M.S.） A.C.1minute （ Recommended Value 1.5-2.5（15-25） Recommended Value 1.5-2.5（15-25） 2.7（28） 2.7（28） 170 ■Electrical Characteristics Symbol IRRM VFM Item Repetitive Peak Reverse Current, max. Forward Voltage Drop, max. Conditions at VDRM, single phase, half wave. Tj＝125℃ Forward current 120A，Tj＝25℃，Inst. measurement Junction to case Ratings 15 1.40 0.55 Unit mA V ℃/W Rth j-c） Thermal Impedance, max. （ SanRex ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com DD40F/KD40F １3 ０ ５ Maximum Forward Characteristics Power Dissipation Pav W） （ ８ ０ ７ ０ ６ ０ ５ ０ ４ ０ Average Forward Current vs. Power Dissipation Per one element Forward Current （A） D.C. Single Phase Three Phase ２ １2 ０ ５ ２ 1 Max. ３ ０ ２ ０ １ ０ ０ ０ １ ０ ２ ０ ３ ０ ４ ０ ５ ０ ６ ０ ７ ０ ８ ０ １ ０ ５ ０ １ ２ ３ ４ ５ Forward Voltage Drop （V） Average Forward Current A） （ Allowable Case Temperature Tc （℃） １０ ３ １０ ２ １０ １ １０ ０ Average Forward Current vs. Allowable Case Temperature Per one element １０ ６０ Cycle Surge Forward Current Rating （Non-Repetitive） Per one element Ｔ = ５ start ｊ２ ℃ D.C. ８ ０ 7 ０ ６ ０ ５ ０ ０ １ ０ ２ ０ Three Phase Single Phase ９ ０ Surge Forward Current （A） １０ ２０ ８０ ０ 60Hz 50Hz ４０ ０ ３ ０ ４ ０ ５ ０ ６ ０ ７ ０ ８ ０ ００ １ ０ ２ ５ １1 ０ ２ ５ １2 ０ Average Forward Current A） （ Transient Thermal Impedance θ （℃/W） j-c Time （Cycles） １０ ． ０９ ． ０８ ． ０７ ． ０６ ． ０５ ． ０４ ． ０３ ． ０２ ． ０１ ． Transient Thermal Impedance Per one element Junction to Case ０ -３ １ ０ １ -２ ０ １ -１ ０ Time t sec） （ １０ ０ １1 ０ １2 ０ １3 ０ １4 ０ Allowable Case Temperature （℃） Total Power Dissipation （W） ３０ ０ Rth:1.0℃/W Rth:0.8℃/W Rth:0.6℃/W Rth:0.4℃/W Rth:0.2℃/W Rth:0.1℃/W B2 Id Av） （ Total Power Dissipation （W） ９ ０ Rth:0.8℃/W Rth:0.6℃/W Rth:0.4℃/W Rth:0.2℃/W Rth:0.1℃/W Id(AV) ３０ ０ B6 ９ ０ １０ ０ １０ １ １０ ０ ２０ ０ ２０ ０ １０ １ １０ ０ １０ ０ １０ ２ ０ ０ ２ ４ ６ ８ １０ ０ ００ ０００ ４ ０ ８ ０ １０ ２ １５ ２ ０ ０ ２ ４ ６ ８ １０ ０ ００ ０００ ４ ０ ８ ０ １０ ２ １０ ２ １５ ２ Output Current （A） Ambient Temperature （℃） Output Current （A） Ambient Temperature （℃） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: semi@sanrex.com Allowable Case Temperature （℃） ４０ ０ Output Current B； ２ Two Pluse Bridge connection ４０ ０ Output Current B ； pulse Bridge ６ Six connection