K246

Ordering number:ENN6475 N-Channel Silicon MOSFET 2SK2464 Ultrahigh-Speed Switching Applications Features · Low ON resistance. · Ultrahigh-speed switching. · Enables simplified fabrication, high-density mounding, and miniaturization in end products due to the surface mountable package. Package Dimensions unit:mm 2128 [2SK2464] 8.2 7.8 6.2 3 8.4 10.0 0.4 0.2 0.6 4.2 1.2 1.0 2.54 1 2 1.0 2.54 6.2 5.2 0.3 0.6 7.8 5.08 10.0 6.0 2.5 0.7 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW≤10µs, duty cycle≤1% Tc=25˚C Conditions 1 : Gate 2 : Source 3 : Drain SANYO : ZP Ratings 30 ±20 45 180 50 150 –55 to +150 Unit V V A A W ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Drain-to-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Symbol V(BR)DSS IDSS IGSS VGS(off) | yfs | RDS(on) Ciss1 Ciss2 Coss Crss ID=1mA, VGS=0 VDS=30V, VGS=0 VGS=±20V, VDS=0 VDS=10V, ID=1mA VDS=10V, ID=22A ID=22A, VGS=10V VDS=0V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz VDS=10V, f=1MHz 2 20 30 8.5 3750 2700 2300 450 12 4300 Conditions Ratings min 30 100 ±100 4 typ max Unit V µA nA V S mΩ pF pF pF pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 60100TS (KOTO) TA-2175 No.6475–1/3 2SK2464 Continued from preceding page. Parameter Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Symbol td(on) tr td(off) tf VSD Conditions See specified Test Circuit See specified Test Circuit See specified Test Circuit See specified Test Circuit IS=45A, VGS=0 Ratings min typ 45 350 100 100 1.0 1.5 max Unit ns ns ns ns V Switching Time Test Circuit VDD=15V Vin 10V 0V Vin PW=10µs D.C.≤1% P.G 50Ω ID=22A RL=0.68Ω VOUT D G 2SK2464 S 100 ID -- VDS VGS=10V 100 ID -- VGS VDS=10V 6.5V 80 Drain Current, ID – A 60 Drain Current, ID – A 6.0V 80 60 5.5V 40 40 Tc=7 0 2 4 5°C 20 0 20 5.0V 4.5V 0 0 2 4 6 8 10 IT00772 --25 °C 25°C 6 8 10 IT00773 Drain-to-Source Voltage, VDS – V 100 yfs -- ID Gate-to-Source Voltage, VGS – V 30 RDS(on) -- VGS ID=22A Tc=25°C Forward Transfer Admitance, | yfs | – S Static Drain-to-Source On-State Resistance, RDS(on) – mΩ 3 5 7 100 2 IT00774 7 5 3 2 25 T 10 7 5 3 2 57 1.0 2 3 5 -c= 25 °C °C 25 20 15 °C 75 10 5 0 7 10 2 4 6 8 10 12 14 16 18 IT00775 Drain Current, ID – A Gate-to-Source Voltage, VGS – V No.6475–2/3 2SK2464 2 10000 7 5 Ciss, Coss, Crss -- VDS f=1MHz 2 SW Time -- ID VDD=15V VGS=10V Switching Time, SW Time – ns 1000 7 5 3 2 Ciss, Coss, Crss – pF 3 2 1000 7 5 3 2 100 7 5 3 0 5 10 15 20 Ciss Coss td ( o ff) tf Crss 100 7 5 3 2 tr td(on) 25 30 IT00776 60 Drain-to-Source Voltage,VDS – V 5 3 2 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 Drain Current, ID – A IT00777 ASO IDP=180A PD -- Tc 10µ s 100 µs Allowable Power Dissipation, PD – W 50 Drain Current, ID – A 100 7 5 3 2 10 7 5 3 2 1.0 7 5 10m s DC 100m Operation in s ope this area is rat ion limited by RDS(on) ID=45A 1m 40 s 30 20 10 Tc=25˚C Single pulse 5 7 1.0 2 3 5 7 0 10 2 3 5 0 20 40 IT00778 Drain-to-Source Voltage,VDS – V Case Temperature, Tc – °C 60 80 100 120 140 160 IT00779 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2000. Specifications and information herein are subject to change without notice. PS No.6475–3/3