1065

Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C18 with Fuseholder 1-pole 065 C18 70° C Description - Panel Mount: Screw-on version from front or rear side, Appliance Inlet, Protection class II, Fuseholder for fuse-links 5 x 20 mm - Solder terminals or quick connect terminals References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Approvals - VDE License Number: 40013344 - UL License Number: E88880 - CSA License Number: 1084381 Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 1.5 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 20 acc. to IEC 60529 Suitable for appliances with protection class 2 acc. to IEC 61140 Solder terminals or quick connect terminals UL 94V-0 Appliance Inlet C18 acc. to IEC/EN 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 2 1-pole, acc. to IEC 60127-6, for fuse-links 5 x 20 mm Admissible power acceptance at higher ambient temperature see derating curves Fuseholder Power Acceptance @ Ta > 23°C Allowable Operation Temp. Degree of Protection Protection Class Terminal Material: Housing Dimensions 44 R 2. 5 R 3 44 mm 21.5 27.2 - 0 +0.2 30.4 - 0 30.2 33 31 R 2.5 +0.2 ø 2 3. R R 27.7 36 27 4.5 2.5 36 3 lenght of the terminal please find at the order code configuration table 2. 5 Connectors  065 www.schurter.com/pg05 Config. Code Power entry modules without line filter Product Configurator 1065|-|H|-|A|B|C|N|-|D|-|E|G|O| The characters are placeholders for the correspondingly keys of selections from the key tables. 1065|-| H |-|A|B|C|N|-|D|-|E|G|O| = Type Type protection class 2 1065|-|H|-|A|B|C| N |-|D|-|E|G|O| = Terminal Fuseholder Configuration key B Terminal Fuseholder solder terminal blade terminal (4,8x0,8mm) Configuration key 1 8 1065|-|H|-| A |B|C|N|-|D|-|E|G|O| = Terminals Terminal L short solder terminal (L=4,8mm) long solder terminal (L=8,5mm) blade terminal (4,8x0,8mm) blade terminal (6,3x0,8mm) Configuration key 2 3 8 9 1065|-|H|-|A|B|C|N|-| D |-|E|G|O| = Color Color jet black; RAL9005 silver grey; RAL7001 pure white; RAL9010 standard color: black Configuration key A B D 1065|-|H|-|A| B |C|N|-|D|-|E|G|O| = Terminals Terminal N short solder terminal (L=4,8mm) long solder terminal (L=8,5mm) blade terminal (4,8x0,8mm) blade terminal (6,3x0,8mm) Symbols similar as in table A 1065|-|H|-|A|B|C|N|-|D|-| E |G|O| = Style Configuration key 2 3 8 9 Style flange with countersunk holes flange with through holes Configuration key 1 2 1065|-|H|-|A|B|C|N|-|D|-|E| G |O| = Dimension X Dimension "X" Configuration key 1065|-|H|-|A|B| C |N|-|D|-|E|G|O| = Terminals Terminal Ground without terminal Symbols similar as in table A 00 Configuration key The dimension "X" is dispalyed in (1/10 mm). This information is also valid for the order code 0 1065|-|H|-|A|B|C|N|-|D|-|E|G| O | = Features Features dead cover holder for 1 fuse (text legible, when inlet on top) holder for 1 fuse (text legible, when inlet on bottom) Configuration key 1 2 3 Variants Config. Code 1065-X-2201-A-1002 Description 1065, IEC Power Entry Module C18, 70°C, version: 2, L: short solder terminal (L=4,8mm), N: short solder terminal (L=4,8mm), ground: without terminal, fuseholder: solder terminal, color: jet black; RAL9005, design: flange with countersunk holes, dimension X: 00, features: holder for 1 fuse (text legible, when inlet on top), not used 1065, IEC Power Entry Module C18, 70°C, version: 2, L: blade terminal (4,8x0,8mm), N: blade terminal (4,8x0,8mm), ground: without terminal, fuseholder: blade terminal (4,8x0,8mm), color: jet black; RAL9005, design: flange with countersunk holes, dimension X: 00, features: holder for 1 fuse (text legible, when inlet on top), not used Order Number 4304.6033 1065-X-8808-A-1002 4304.6034 The listet variants should be available from stock Other versions on request www.schurter.com/contact Packaging unit 50 Pcs  Connectors Power entry modules without line filter www.schurter.com/pg05 Accessories Description 065 Assorted Covers Rear Cover Mating Outlets/Connectors Category / Description Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to 1065 Power Cord Overview complete Power Cord with IEC Connector C17, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord further types to 1065 Power Supply or Interconnection Cord Overview complete Divers Power Supply and Interconnection Cords 10 A Power Supply or Interconnection Cord further types to 1065 Kabelverbindung/10 A 0301 0311 3011 3012 3013 ... 0101 0102 0102-G 0112 4012 ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.