S-1172 Series
www.ablic.com
www.ablicinc.com
HIGH RIPPLE-REJECTION LOW DROPOUT
HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.2_03
© ABLIC Inc., 2007-2015
The S-1172 Series, developed by using CMOS technology, is a positive voltage regulator with a super low dropout voltage,
high-accuracy output voltage and low current consumption.
The S-1172 Series provides the very low dropout voltage and the large output current due to the built-in transistor with low
on-resistance. The S-1172 Series includes an overcurrent protection circuit that prevents the load current from exceeding
the current capacitance of the output transistor, a thermal shutdown circuit that prevents damage due to overheating, and
an inrush current limit circuit to limit the excessive inrush current generated at power-on.
The ON/OFF circuit ensures longer battery life. Compared with the voltage regulators using the conventional CMOS
technology, a large variety of capacitors are available, including small ceramic capacitors.
High heat radiation HSOP-6 and small SOT-89-5 packages realize high-density mounting.
Features
Output voltage:
Input voltage:
Output voltage accuracy:
Dropout voltage:
Current consumption:
Output current:
Input and output capacitors:
Ripple rejection:
Built-in overcurrent protection circuit:
Built-in thermal shutdown circuit:
Built-in inrush current limit circuit:
1.0 V to 5.0 V, selectable in 0.05 V step
1.5 V to 5.5 V
1.0% (1.0 V to 1.45 V output product: 15 mV)
70 mV typ. (3.0 V output product, IOUT = 300 mA)
During operation: 70 A typ., 90 A max. (3.0 V output product)
During power-off: 0.1 A typ., 1.0 A max.
*1
Possible to output 1000 mA (3.0 V output product, VIN VOUT(S) 1.0 V)
A ceramic capacitor of 4.7 F or more can be used.
70 dB typ. (1.0 V output product, f = 1.0 kHz)
Limits overcurrent of output transistor.
Prevents damage caused by heat.
Limits excessive inrush current at power-on.
Built-in ON/OFF circuit:
Ensures Long battery life.
Operation temperature range:
Ta = 40°C to 85°C
Lead-free, Sn 100%, halogen-free*2
*1.
*2.
Attention should be paid to the power dissipation of the package when the output current is large.
Refer to “ Product Name Structure” for details.
Applications
Constant-voltage power supply for battery-powered device
Constant-voltage power supply for TV, notebook PC and home electric appliance
Constant-voltage power supply for portable equipment
Packages
SOT-89-5
HSOP-6
1
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Block Diagram
*1
VIN
VOUT
Overcurrent
protection circuit
Thermal shutdown circuit
ON/OFF circuit
ON/OFF
Reference
voltage circuit
VSS
*1.
Parasitic diode
Figure 1
2
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Product Name Structure
Users can select the product type, output voltage, and package type for the S-1172 Series. Refer to “1.
name” regarding the contents of product name, “2. Packages” regarding the package drawings and “3.
name list” regarding details of product name.
1.
Product
Product
Product name
S-1172
x
xx
-
xxxx
x
Environmental code
U: Lead-free (Sn 100%), halogen-free
G: Lead-free (for details, please contact our sales office)
Package abbreviation and packing specifications
*1
U5T1: SOT-89-5, Tape
E6T1: HSOP-6, Tape
Output voltage
*2
10 to 50
(e.g., when the output voltage is 1.0 V, it is expressed as 10.)
Product type
*3
A: ON/OFF pin negative logic
B: ON/OFF pin positive logic
*1.
*2.
*3.
2.
Refer to the tape drawing.
If you request the product which has 0.05 step, contact our sales office.
Refer to “3. ON/OFF pin” in “ Operation”.
Packages
Package Name
SOT-89-5
HSOP-6
Environmental code = G
Environmental code = U
Package
UP005-A-P-SD
FH006-A-P-SD
FH006-A-P-SD
Drawing Code
Tape
Reel
UP005-A-C-SD
UP005-A-R-SD
FH006-A-C-SD
FH006-A-R-SD
FH006-A-C-SD
FH006-A-R-S1
Land
FH006-A-L-SD
FH006-A-L-SD
3
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
3.
Rev.2.2_03
Product name list
Table 1
Output Voltage
SOT-89-5
S-1172B10-U5T1x
S-1172B11-U5T1x
HSOP-6
S-1172B10-E6T1x
S-1172B11-E6T1x
S-1172B1B-E6T1x
S-1172B12-E6T1x
S-1172B1C-E6T1x
S-1172B13-E6T1x
S-1172B14-E6T1x
S-1172B15-E6T1x
S-1172B16-E6T1x
S-1172B17-E6T1x
S-1172B18-E6T1x
S-1172B1J-E6T1x
S-1172B19-E6T1x
S-1172B20-E6T1x
S-1172B21-E6T1x
S-1172B22-E6T1x
S-1172B23-E6T1x
S-1172B24-E6T1x
S-1172B25-E6T1x
S-1172B26-E6T1x
S-1172B27-E6T1x
S-1172B28-E6T1x
S-1172B2J-E6T1x
S-1172B29-E6T1x
S-1172B30-E6T1x
S-1172B31-E6T1x
S-1172B32-E6T1x
S-1172B33-E6T1x
S-1172B34-E6T1x
S-1172B35-E6T1x
S-1172B36-E6T1x
S-1172B37-E6T1x
S-1172B38-E6T1x
S-1172B39-E6T1x
S-1172B40-E6T1x
S-1172B41-E6T1x
S-1172B42-E6T1x
S-1172B43-E6T1x
S-1172B44-E6T1x
S-1172B45-E6T1x
S-1172B46-E6T1x
S-1172B47-E6T1x
S-1172B48-E6T1x
S-1172B49-E6T1x
S-1172B50-E6T1x
1.0 V 15 mV
1.1 V 15 mV
1.15 V 15 mV
S-1172B12-U5T1x
1.2 V 15 mV
S-1172B1C-U5T1x
1.25 V 15 mV
S-1172B13-U5T1x
1.3 V 15 mV
S-1172B14-U5T1x
1.4 V 15 mV
S-1172B15-U5T1x
1.5 V 1.0%
S-1172B16-U5T1x
1.6 V 1.0%
S-1172B17-U5T1x
1.7 V 1.0%
S-1172B18-U5T1x
1.8 V 1.0%
S-1172B1J-U5T1x
1.85 V 1.0%
S-1172B19-U5T1x
1.9 V 1.0%
S-1172B20-U5T1x
2.0 V 1.0%
S-1172B21-U5T1x
2.1 V 1.0%
S-1172B22-U5T1x
2.2 V 1.0%
S-1172B23-U5T1x
2.3 V 1.0%
S-1172B24-U5T1x
2.4 V 1.0%
S-1172B25-U5T1x
2.5 V 1.0%
S-1172B26-U5T1x
2.6 V 1.0%
S-1172B27-U5T1x
2.7 V 1.0%
S-1172B28-U5T1x
2.8 V 1.0%
S-1172B2J-U5T1x
2.85 V 1.0%
S-1172B29-U5T1x
2.9 V 1.0%
S-1172B30-U5T1x
3.0 V 1.0%
S-1172B31-U5T1x
3.1 V 1.0%
S-1172B32-U5T1x
3.2 V 1.0%
S-1172B33-U5T1x
3.3 V 1.0%
S-1172B34-U5T1x
3.4 V 1.0%
S-1172B35-U5T1x
3.5 V 1.0%
S-1172B36-U5T1x
3.6 V 1.0%
S-1172B37-U5T1x
3.7 V 1.0%
S-1172B38-U5T1x
3.8 V 1.0%
S-1172B39-U5T1x
3.9 V 1.0%
S-1172B40-U5T1x
4.0 V 1.0%
S-1172B41-U5T1x
4.1 V 1.0%
S-1172B42-U5T1x
4.2 V 1.0%
S-1172B43-U5T1x
4.3 V 1.0%
S-1172B44-U5T1x
4.4 V 1.0%
S-1172B45-U5T1x
4.5 V 1.0%
S-1172B46-U5T1x
4.6 V 1.0%
S-1172B47-U5T1x
4.7 V 1.0%
S-1172B48-U5T1x
4.8 V 1.0%
S-1172B49-U5T1x
4.9 V 1.0%
S-1172B50-U5T1x
5.0 V 1.0%
Remark 1. Please contact our sales office for products with an output voltage other than those
specified above or type A products.
2. x: G or U
3. Please select products of environmental code = U for Sn 100%, halogen-free products.
4
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Pin Configurations
Table 2
SOT-89-5
Top view
5
4
*1.
1
2
3
Pin No.
Symbol
1
ON/OFF
Description
ON/OFF pin
2
VSS
GND pin
3
NC*1
No connection
4
VIN
Input voltage pin
5
VOUT
Output voltage pin
The NC pin is electrically open.
The NC pin can be connected to the VIN pin or the VSS pin.
Figure 2
Table 3
HSOP-6
Top view
6
1
5
2
4
3
*1.
Pin No.
Symbol
1
VOUT
2
VSS
3
ON/OFF
*1
Description
Output voltage pin
GND pin
ON/OFF pin
4
NC
5
VSS
GND pin
6
VIN
Input voltage pin
No connection
The NC pin is electrically open.
The NC pin can be connected to the VIN pin or the VSS pin.
Figure 3
5
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Absolute Maximum Ratings
Table 4
(Ta +25C unless otherwise specified)
Item
Symbol
Input voltage
Output voltage
SOT-89-5
Power
dissipation
HSOP-6
Operation ambient temperature
Storage temperature
*1.
VIN
VON/OFF
VOUT
PD
Topr
Tstg
Absolute Maximum Rating
VSS 0.3 to VSS + 6
VSS 0.3 to VIN + 0.3
VSS 0.3 to VIN + 0.3
*1
1000
1900*2
40 to +85
40 to +125
Unit
V
V
V
mW
mW
°C
°C
When mounted on board
[Mounted board]
(1) Board size:
(2) Name:
*2.
114.3 mm 76.2 mm t1.6 mm
JEDEC STANDARD51-7
When mounted on board
[Mounted board]
Caution
(1) Board size:
(2) Board material:
50 mm 50 mm t1.6 mm
Glass epoxy resin (two layers)
(3) Wiring ratio:
50%
(4) Test conditions:
When mounted on board (wind speed : 0 m/s)
(5) Land pattern:
Refer to the recommended land pattern (drawing code : FH006-A-L-SD)
The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
Power dissipation (PD) [mW]
2400
2000
HSOP-6
1600
800
400
0
Figure 4
SOT-89-5
1200
0
150
100
50
Ambient temperature (Ta) [C]
Power Dissipation of Package (When Mounted on Board)
Table 5
Condition
HSOP-6 (When mounted on board)
SOT-89-5 (When mounted on board)
6
Power Dissipation
1900 mW
1000 mW
Thermal Resistance Value (ja)
53°C/W
100°C/W
Rev.2.2_03
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Power Dissipation of HSOP-6 (Reference)
Power dissipation of package differs depending on the mounting conditions.
Consider the power dissipation characteristics under the following conditions as reference.
[Mounted board]
50 mm 50 mm t1.6 mm
Glass epoxy resin (two layers)
(1) Board size:
(2) Board material:
(3) Wiring ratio:
90%
(4) Test conditions:
When mounted on board (wind speed : 0 m/s)
(5) Land pattern:
Refer to the recommended land pattern (drawing code : FH006-A-L-SD)
Power dissipation (PD) [mW]
2400
2000
1600
1200
800
400
0
Figure 5
0
150
100
50
Ambient temperature (Ta) [C]
Power Dissipation of Package (When Mounted on Board)
Table 6
Condition
HSOP-6 (When mounted on board)
Power Dissipation (Reference)
2000 mW
Thermal Resistance Value (ja)
50°C/W
7
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Electrical Characteristics
Table 7 (1 / 2)
Item
Output voltage*1
Output current*2
Symbol
VOUT(E)
IOUT
Condition
VIN = VOUT(S) + 1.0 V,
IOUT = 100 mA
VIN = 5.5 V,
IOUT = 100 mA
VIN VOUT(S) + 1.0 V
VIN = 5.5 V
IOUT = 300 mA
Dropout voltage*3
Vdrop
IOUT = 1000 mA
Line regulation
Load regulation
Output voltage
temperature
*4
coefficient
Current
consumption
during operation
VOUT1
VIN VOUT
VOUT2
VOUT
Ta VOUT
ISS1
Current
consumption
during power-off
ISS2
Input voltage
VIN
8
1.0 V VOUT(S) < 1.5 V
1.5 V VOUT(S) 4.5 V
4.5 V < VOUT(S) 5.0 V
1.0 V VOUT(S) 4.5 V
4.5 V < VOUT(S) 5.0 V
1.0 V VOUT(S) < 1.1 V
1.1 V VOUT(S) < 1.2 V
1.2 V VOUT(S) < 1.3 V
1.3 V VOUT(S) < 1.4 V
1.4 V VOUT(S) < 1.5 V
1.5 V VOUT(S) < 2.6 V
2.6 V VOUT(S) 5.0 V
1.0 V VOUT(S) < 1.1 V
1.1 V VOUT(S) < 1.2 V
1.2 V VOUT(S) < 1.3 V
1.3 V VOUT(S) < 1.4 V
1.4 V VOUT(S) < 1.5 V
1.5 V VOUT(S) < 2.0 V
2.0 V VOUT(S) < 2.6 V
2.6 V VOUT(S) 5.0 V
VOUT(S) + 0.5 V VIN
1.0 V VOUT(S) < 3.6 V
5.5 V,
3.6 V VOUT(S) 4.8 V
IOUT = 100 mA
5.3 V VIN 5.5 V,
4.8 V < VOUT(S) 5.0 V
IOUT = 100 mA
VIN = VOUT(S) + 1.0 V,
1.0 V VOUT(S) 4.5 V
1 mA IOUT 300 mA
VIN = 5.5 V,
4.5 V < VOUT(S) 5.0 V
1 mA IOUT 300 mA
VIN = VOUT(S) + 1.0 V,
1.0 V VOUT(S) 4.5 V
IOUT = 100 mA,
40°C Ta 85°C
VIN = 5.5 V,
4.5 V < VOUT(S) 5.0 V
IOUT = 100 mA,
40°C Ta 85°C
VIN VOUT(S) 1.0 V, ON/OFF pin ON,
no load, 1.0 V VOUT(S) < 1.8 V
VIN VOUT(S) 1.0 V, ON/OFF pin ON,
no load, 1.8 V VOUT(S) 4.5 V
VIN 5.5 V, ON/OFF pin ON,
no load, 4.5 V < VOUT(S) 5.0 V
VIN VOUT(S) 1.0 V,
1.0 V VOUT(S) 4.5 V
ON/OFF pin OFF,
no load
VIN 5.5 V,
4.5 V < VOUT(S) 5.0 V
ON/OFF pin OFF,
no load
(Ta +25C unless otherwise specified)
Test
Min.
Typ.
Max.
Unit
Circuit
VOUT(S) VOUT(S) VOUT(S)
V
1
0.015
+ 0.015
VOUT(S) VOUT(S) VOUT(S)
V
1
0.99
1.01
VOUT(S) VOUT(S) VOUT(S)
V
1
0.99
1.01
*5
1000
mA
3
1000*5
mA
3
0.5
0.54
0.58
V
1
0.44
0.48
V
1
0.34
0.38
V
1
0.24
0.28
V
1
0.14
0.18
V
1
0.10
0.15
V
1
0.07
0.10
V
1
0.9
V
1
0.8
V
1
0.7
V
1
0.6
V
1
0.5
V
1
0.4
V
1
0.32
V
1
0.23
V
1
0.05
0.2
%/V
1
2.5
10
mV
1
2.5
10
mV
1
15
30
mV
1
15
30
mV
1
130
ppm/C
1
130
ppm/C
1
90
110
A
2
70
90
A
2
70
90
A
2
0.1
1.0
A
2
0.1
1.0
A
2
1.5
5.5
V
Rev.2.2_03
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Table 7 (2 / 2)
Item
ON/OFF pin input
voltage “H”
ON/OFF pin input
voltage “L”
ON/OFF pin input
current “H”
ON/OFF pin input
current “L”
Ripple rejection
Short-circuit current
Symbol
VSH
VSL
Condition
VIN = VOUT(S) + 1.0 V,
RL = 1.0 k,
determined by VOUT
output level
VIN = 5.5 V,
RL = 1.0 k,
determined by VOUT
output level
VIN = VOUT(S) + 1.0 V,
RL = 1.0 k,
determined by VOUT
output level
VIN = 5.5 V,
RL = 1.0 k,
determined by VOUT
output level
(Ta +25C unless otherwise specified)
Test
Min.
Typ.
Max.
Unit
Circuit
1.0 V VOUT(S) 4.5 V
1.0
V
4
4.5 V < VOUT(S) 5.0 V
1.0
V
4
1.0 V VOUT(S) 4.5 V
0.3
V
4
4.5 V < VOUT(S) 5.0 V
0.3
V
4
ISH
VIN = 5.5 V, VON/OFF = 5.5 V
0.1
0.1
A
4
ISL
VIN = 5.5 V, VON/OFF = 0 V
0.1
0.1
A
4
1.0 V VOUT(S) < 1.2 V
70
dB
5
1.2 V VOUT(S) 3.0 V
65
dB
5
3.0 V < VOUT(S) 4.5 V
60
dB
5
4.5 V < VOUT(S) 5.0 V
60
dB
5
1.0 V VOUT(S) 4.5 V
200
mA
3
4.5 V < VOUT(S) 5.0 V
200
mA
3
RR
ISHORT
VIN = VOUT(S) + 1.0 V,
f = 1 kHz,
Vrip = 0.5 Vrms,
IOUT = 100 mA
VIN = 5.5 V,
f = 1 kHz,
Vrip = 0.5 Vrms,
IOUT = 100 mA
VIN VOUT(S) 1.0 V,
ON/OFF pin ON,
VOUT 0 V
VIN 5.5 V,
ON/OFF pin ON,
VOUT 0 V
Thermal shutdown
detection temperature
TSD
Junction temperature
150
C
Thermal shutdown
release temperature
TSR
Junction temperature
120
C
*1.
*2.
*3.
*4.
*5.
VOUT(S) : Set output voltage
VOUT(E) : Actual output voltage
Output voltage when fixing IOUT ( 100 mA) and inputting VOUT(S) 1.0 V or 5.5 V
The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.
Vdrop VIN1 (VOUT3 0.98)
VOUT3 is the output voltage when VIN VOUT(S) 1.0 V or 5.5 V, and IOUT 300 mA or 1000 mA.
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input
voltage.
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
VOUT
VOUT
[mV/°C]*1 = VOUT(S) [V]*2 TaV
[ppm/°C]*3 1000
Ta
OUT
*1. Change in temperature of output voltage
*2. Set output voltage
*3. Output voltage temperature coefficient
The output current can be at least this value.
Due to restrictions on the package power dissipation, this value may not be satisfied.
Attention should be paid to
the power dissipation of the package when the output current is large.
This specification is guaranteed by design.
9
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Test Circuits
1.
+
VOUT
VIN
ON/OFF
V
VSS
A
+
Set to ON
Figure 6
2.
+
A
VOUT
VIN
ON/OFF
VSS
Set to VIN or GND
Figure 7
3.
VOUT
VIN
ON/OFF
VSS
A
V
Set to ON
Figure 8
4.
VOUT
VIN
A
ON/OFF
VSS
V
RL
Figure 9
5.
VOUT
VIN
ON/OFF
VSS
Set to ON
Figure 10
10
V
RL
Rev.2.2_03
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Standard Circuit
Input
Output
VOUT
VIN
CIN
*1
ON/OFF
VSS
Single GND
*1.
*2.
CL
*2
GND
CIN is a capacitor for stabilizing the input.
A ceramic capacitor of 4.7 F or more can be used as CL.
Figure 11
Caution
The above connection diagram and constant will not guarantee successful operation. Perform
thorough evaluation using the actual application to set the constant.
Condition of Application
Input capacitor (CIN):
4.7 F or more
Output capacitor (CL):
4.7 F or more
Caution
1.
Set input capacitor (CIN) and output capacitor (CL) as CIN = CL.
2.
Generally a series regulator may cause oscillation, depending on the selection of external
parts. Confirm that no oscillation occurs in the application for which the above capacitors are
used.
Selection of Input and Output Capacitors (CIN, CL)
The S-1172 Series requires an output capacitor between the VOUT pin and the VSS pin for phase compensation.
Operation is stabilized by a ceramic capacitor with an output capacitance of 4.7 F or more over the entire
temperature range. When using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic capacitor, the
capacitance must be 4.7 F or more.
The values of output overshoot and undershoot, which are transient response characteristics, vary depending on the
value of output capacitor.
The required value of capacitance for the input capacitor differs depending on the application.
Set the value for input capacitor (CIN) and output capacitor (CL) as follows.
CIN 4.7 F
CL 4.7 F
CIN = CL
Caution
The S-1172 Series may oscillate if setting the value as CIN 4.7 F, CL 4.7 F, CIN CL.
Define the values by sufficient evaluation including the temperature characteristics under the usage
condition.
11
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Explanation of Terms
1.
Low dropout voltage regulator
This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.
2.
Output voltage (VOUT)
The accuracy of the output voltage is ensured at 1.0% or 15 mV*2 under the specified conditions of fixed input
voltage*1, fixed output current, and fixed temperature.
*1.
*2.
Differs depending on the product.
When VOUT < 1.5 V : 15 mV, when 1.5 V VOUT : 1.0%
Caution
If the above conditions change, the output voltage value may vary and exceed the accuracy
range of the output voltage. Refer to “ Electrical Characteristics” and “ Characteristics
(Typical Data)” for details.
3.
VOUT1
Line regulation
VINVOUT
Indicates the dependency of the output voltage against the input voltage. That is, the value shows how much the
output voltage changes due to a change in the input voltage after fixing output current constant.
4.
Load regulation (VOUT2)
Indicates the dependency of the output voltage against the output current. That is, the value shows how much the
output voltage changes due to a change in the output current after fixing output current constant.
5.
Dropout voltage (Vdrop)
Indicates the difference between input voltage (VIN1) and the output voltage when; decreasing input voltage (VIN)
gradually until the output voltage has dropped out to the value of 98% of output voltage (VOUT3), which is at
VIN =VOUT(S) 1.0 V or 5.5 V.
Vdrop = VIN1 (VOUT3 0.98)
12
Rev.2.2_03
6.
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
VOUT
Output voltage temperature coefficient
TaVOUT
The shaded area in Figure 12 is the range where VOUT varies in the operation temperature range when the output
voltage temperature coefficient is 130 ppm/C.
Example of S-1172B30 typ. product
VOUT [V]
0.39 mV/C
VOUT(E)
*1
0.39 mV/C
40
25
85
Ta [C]
*1. VOUT(E) is the value of the output voltage measured at Ta = 25C.
Figure 12
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
VOUT
VOUT
[mV/°C]*1 = VOUT(S) [V]*2 TaV
[ppm/°C]*3 1000
Ta
OUT
*1.
Change in temperature of output voltage
*2.
Set output voltage
*3.
Output voltage temperature coefficient
13
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Operation
1.
Basic operation
Figure 13 shows the block diagram of the S-1172 Series.
The error amplifier compares the reference voltage (Vref) with feedback voltage (Vfb), which is the output voltage
resistance-divided by feedback resistors (Rs and Rf). It supplies the gate voltage necessary to maintain the constant
output voltage which is not influenced by the input voltage and temperature change, to the output transistor.
VIN
*1
Current
supply
Error
amplifier
Vref
VOUT
Rf
Vfb
Reference voltage
circuit
Rs
VSS
*1.
Parasitic diode
Figure 13
2.
Output transistor
In the S-1172 Series, a low on-resistance P-channel MOS FET is used as the output transistor.
Be sure that VOUT does not exceed VIN 0.3 V to prevent the voltage regulator from being damaged due to reverse
current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential of VOUT became
higher than VIN.
14
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
3.
ON/OFF pin
This pin starts and stops the regulator.
When the ON/OFF pin is set to OFF level, the entire internal circuit stops operating, and the built-in P-channel MOS
FET output transistor between the VIN pin and the VOUT pin is turned off, reducing current consumption
significantly. The VOUT pin is set to the VSS level by the internal dividing resistor of several hundred k between
the VOUT pin and the VSS pin.
Note that the current consumption increases when a voltage of 0.3 V to 1.0 V is applied to the ON/OFF pin.
The ON/OFF pin is configured as shown in Figure 14. Since the ON/OFF pin is neither pulled down nor pulled up
internally, do not use it in the floating status. When not using the ON/OFF pin, connect it to the VSS pin in the
product A type, and connect it to the VIN pin in B type.
Table 8
Product Type
A
A
B
B
ON/OFF Pin
Internal Circuit
VOUT Pin Voltage
Current Consumption
“L”: ON
“H”: OFF
“L”: OFF
“H”: ON
Operate
Stop
Stop
Operate
Set value
VSS level
VSS level
Set value
ISS1
ISS2
ISS2
ISS1
VIN
ON/OFF
VSS
Figure 14
4.
Overcurrent protection circuit
The S-1172 Series includes an overcurrent protection circuit having the characteristics shown in “1. Output
voltage vs. Output current (When load current increases) (Ta = 25C)” in “ Characteristics (Typical Data)”,
in order to protect the output transistor against an excessive output current and short circuiting between the VOUT
pin and the VSS pin. The current when the output pin is short-circuited (ISHORT) is internally set at approx. 200 mA
typ., and the normal value is restored for the output voltage, if releasing a short circuit once.
Caution This overcurrent protection circuit does not work as for thermal protection. If this IC long keeps
short circuiting inside, pay attention to the conditions of input voltage and load current so that,
under the usage conditions including short circuit, the loss of the IC will not exceed power
dissipation of the package.
15
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
5.
Rev.2.2_03
Thermal shutdown circuit
The S-1172 Series has a thermal shutdown circuit to protect the device from damage due to overheat. When the
junction temperature rises to 150C typ., the thermal shutdown circuit operates to stop regulating. When the
junction temperature drops to 120C typ., the thermal shutdown circuit is released to restart regulating.
Due to self-heating of the S-1172 Series, if the thermal shutdown circuit starts operating, it stops regulating so that
the output voltage drops. When regulation stops, the S-1172 Series does not itself generate heat so that the IC’s
temperature drops. When the temperature drops, the thermal shutdown circuit is released to restart regulating, thus
the S-1172 Series generates heat again. Repeating this procedure makes waveform of the output voltage pulse-like
form. Stop or restart of regulation continues unless decreasing either or both of the input voltage and the output
current in order to reduce the internal power consumption, or decreasing the ambient temperature.
Table 9
Thermal Shutdown Circuit
Operation: 150C typ.
Release: 120C typ.
*1.
6.
*1
*1
VOUT Pin Voltage
VSS level
Set value
Junction temperature
Inrush current limit circuit
The S-1172 Series has a built-in inrush current limit circuit to limit the inrush current generated at power-on or at
the time when the ON/OFF pin is set to ON. This circuit limits the inrush current (500 mA, typ.) immediately after
power-on or from the time when the ON/OFF pin is set to ON until the specified time (100 s min.) which is set
internally.
Caution
The junction temperature drops to 120C typ. by the operation of thermal shutdown circuit, after
stopping regulation, the circuit is released to restart regulation; in this case, note that the period
to limit inrush current may become shorter (10 s min.).
16
Rev.2.2_03
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Precautions
Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is low. When
mounting an output capacitor between the VOUT pin and the VSS pin (CL) and a capacitor for stabilizing the input
between the VIN pin and the VSS pin (CIN), the distance from the capacitors to these pins should be as short as
possible.
Note that generally the output voltage may increase when a series regulator is used at low load current (1.0 mA or
less).
Note that generally the output voltage may increase due to the leakage current from an output driver when a series
regulator is used at high temperature.
Note that the output voltage may increase due to the leakage current from an output driver even if the ON/OFF pin is
at OFF level when a series regulator is used at high temperature.
Generally a series regulator may cause oscillation, depending on the selection of external parts. The following
conditions are recommended for the S-1172 Series. However, be sure to perform sufficient evaluation under the
actual usage conditions for selection, including evaluation of temperature characteristics. Refer to “5.
Example of
equivalent series resistance vs. Output current characteristics (Ta = 25C)” in “ Reference Data” for the
equivalent series resistance (RESR) of the output capacitor.
Input capacitor (CIN):
4.7 F or more
Output capacitor (CL):
4.7 F or more
The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitance is
small or an input capacitor is not connected. Note that the voltage regulator may oscillate when the value of the
output capacitor is greater than that of the input capacitor.
Ringing may occur when these three conditions below are satisfied. Before selecting an input capacitor, be sure to
evaluate sufficiently under the actual usage conditions, including the temperature characteristics.
The power supply inductance is high.
The load current is 100 mA or more.
The difference between the input voltage and the output voltage is close to the value of dropout voltage.
If the output capacitance is small, power supply’s fluctuation and the characteristics of load fluctuation become worse.
Sufficiently evaluate the output voltage’s fluctuation with the actual device.
Overshoot may occur in the output voltage momentarily if the voltage is rapidly raised at power-on or when the power
supply fluctuates. Sufficiently evaluate the output voltage at power-on with the actual device.
The application conditions for the input voltage, the output voltage, and the load current should not exceed the
package power dissipation.
Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
In determining the output current, attention should be paid to the output current value specified in Table 7 in
“ Electrical Characteristics” and footnote *5 of the table.
ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products
including this IC of patents owned by a third party.
17
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Characteristics (Typical Data)
Output voltage vs. Output current (When load current increases) (Ta = 25C)
S-1172B10
1.2
VOUT [V]
1.0
5.5 V
0.8
VIN = 1.5 V
0.6
3.0 V
2.0 V
0.4
0.2
0
400
0
S-1172B50
6
0
2000
5.5 V
4
Remark
3
1
2.
0
400
800
1200
IOUT [mA]
1600
2000
400
0
800
1200
IOUT [mA]
1600
In determining the output current, attention
should be paid to the following.
2000
Output voltage vs. Input voltage (Ta = 25°C)
S-1172B30
3.1
1.0
3.0
0.9
IOUT = 1 mA
50 mA
100 mA
0.8
0.7
VOUT [V]
VOUT [V]
S-1172B10
1.1
0.5
0.5
1.0
1.5
2.0
VIN [V]
2.5
3.0
5.3
5.5
S-1172B50
5.1
VOUT [V]
5.0
IOUT = 1 mA
50 mA
100 mA
2.9
2.8
2.7
2.6
0.6
IOUT = 1 mA
4.9
50 mA
100 mA
4.8
4.7
4.6
4.5
4.5
18
4.0 V
5.5 V
1. The minimum output current value and
footnote *5 of Table 7 in “ Electrical
Characteristics”
2. Power dissipation of the package
2
0
VIN = 3.5 V
5.0 V
VIN = 5.3 V
5
VOUT [V]
1600
800
1200
IOUT [mA]
S-1172B30
3.5
3.0
2.5
2.0
1.5
1.0
0.5
VOUT [V]
1.
4.7
4.9
5.1
VIN [V]
2.5
2.5
3.0
3.5
4.0
VIN [V]
4.5
5.0
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
3.
Dropout voltage vs. Output current
S-1172B30
°
°
- °
S-1172B10
°
°
- °
S-1172B50
°
°
- °
Dropout voltage vs. Set output voltage
Vdrop [V]
4.
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
IOUT = 1000 mA
500 mA
300 mA
10 mA
0
1
2
3
4
VOUT(S) [V]
5
6
19
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Output voltage vs. Ambient temperature
VOUT [V]
S-1172B10
1.100
1.075
1.050
1.025
1.000
0.975
0.950
0.925
0.900
40 25
S-1172B30
3.20
3.15
3.10
3.05
3.00
2.95
2.90
2.85
2.80
40 25
VOUT [V]
5.
Rev.2.2_03
0
25
Ta [C]
50
75 85
0
25
Ta [C]
50
75 85
0
25
Ta [C]
50
75 85
S-1172B50
5.30
VOUT [V]
5.20
5.10
5.00
4.90
4.80
4.70
40 25
Current consumption vs. Input voltage
S-1172B10
120
S-1172B30
Ta = 85 C
ISS1 [A]
100
80
25 C
60
40 C
40
20
0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
VIN [V]
m
S-1172B50
°
°
- °
20
m
6.
°
°
- °
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
7.
Ripple rejection (Ta = 25C)
S-1172B10
S-1172B30
100
IOUT = 1 mA
30 mA
100 mA
80
60
40
20
0
10
100
1K
10K
100K
Frequency [Hz]
VIN = 4.0 V, COUT = 4.7 F
Ripple Rejection [dB]
Ripple Rejection [dB]
VIN = 2.0 V, COUT = 4.7 F
1M
100
IOUT = 1 mA
30 mA
100 mA
80
60
40
20
0
10
100
1K
10K
100K
Frequency [Hz]
1M
S-1172B50
Ripple Rejection [dB]
VIN = 5.5 V, COUT = 4.7 F
100
IOUT = 1 mA
30 mA
100 mA
80
60
40
20
0
10
100
1K
10K
100K
Frequency [Hz]
1M
21
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Reference Data
Characteristics of input transient response (Ta = 25°C)
VIN
3.15
3
2
1.05
VOUT
VIN [V]
VOUT [V]
1.10
1
1.00
0.95
200
S-1172B30
IOUT = 100 mA, tr = tf = 5.0 s, COUT = 4.7 F, CIN = 4.7 F
6
3.20
0
5
VIN
3.10
3.05
4
3
VOUT
2
3.00
1
2.95
2.90
200
0
200 400 600 800 1000 1200
t [μs]
VIN [V]
S-1172B10
IOUT = 100 mA, tr = tf = 5.0 s, COUT = 4.7 F, CIN = 4.7 F
1.15
4
VOUT [V]
1.
0
0
200 400 600 800 1000 1200
t [μs]
VIN [V]
VOUT [V]
S-1172B50
IOUT = 100 mA, tr = tf = 5.0 s, COUT = 4.7 F, CIN = 4.7 F
5.25
7
5.20 VIN
6
5
5.15
5.10
4
3
5.05
2
5.00 VOUT
1
4.95
4.90
200
0
200 400 600 800 1000 1200
t [μs]
Characteristics of load transient response (Ta = 25C)
1.00
VOUT
1.30
50
1.20
0
50
100
0.95
0.90
200
0
150
200 400 600 800 1000 1200
t [μs]
3.05
3.00
50
VOUT
100
2.95
2.90
200
22
0
50
0
150
200 400 600 800 1000 1200
t [μs]
IOUT [mA]
VOUT [V]
3.10
VOUT
0.80
200
100
IOUT
1.00
400
200
0
200
400
0.90
S-1172B30
VIN = 4.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 50 mA 100 mA
150
3.20
3.15
1.10
IOUT
IOUT [mA]
1.05
100
VOUT [V]
1.10
IOUT
IOUT [mA]
VOUT [V]
1.15
VIN = 2.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 100 mA 500 mA
1.40
600
0
600
200 400 600 800 1000 1200
t [μs]
VIN = 4.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 100 mA 500 mA
3.40
600
3.30
400
IOUT
3.20
200
0
3.10
VOUT
200
3.00
400
2.90
600
2.80
800
2.70
200 0 200 400 600 800 1000 1200
t [μs]
IOUT [mA]
S-1172B10
VIN = 2.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 50 mA 100 mA
150
1.20
VOUT [V]
2.
0
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
5.10
5.05
5.00
IOUT
5.50
50
5.30
0
VOUT
50
100
4.95
4.90
200
150
200 400 600 800 1000 1200
t [μs]
0
4.90
400
IOUT
200
0
VOUT
200
400
4.70
4.50
200
600
200 400 600 800 1000 1200
t [μs]
0
Transient response characteristics of ON/OFF pin (Ta = 25°C)
1
VON/OFF
2
1
0
0
1
VOUT
1
500
2
0
500
1000
t [μs]
1500
S-1172B30
VIN = 4.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 100 mA
VON / OFF = 0 V 4.0 V, tr = 1.0 s
6
10
4
8
6
4
2
0
3
2000
2
VON/OFF
0
2
VOUT
2
500
VON/OFF [V]
3
VON/OFF [V]
S-1172B10
VIN = 2.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 100 mA
VON / OFF = 0 V 2.0 V, tr = 1.0 s
3
5
2
4
VOUT [V]
5.10
VOUT [V]
3.
100
IOUT [mA]
VOUT [V]
5.15
VIN = 5.5 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 100 mA 500 mA
5.70
600
IOUT [mA]
S-1172B50
VIN = 5.5 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 50 mA 100 mA
150
5.20
VOUT [V]
Rev.2.2_03
4
0
500
1000
t [μs]
1500
6
2000
S-1172B50
VIN = 5.5 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 100 mA
VON / OFF = 0 V 5.5 V, tr = 1.0 s
9
20
VOUT [V]
12
3
VON/OFF
8
4
0
0
3
VOUT
4
500
VON/OFF [V]
6
16
6
0
500
1000
t [μs]
1500
9
2000
23
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Characteristics of inrush current (Ta = 25C)
IOUT
4
6
50
0.2
0
50
150
100
t [μs]
0
200
2
0.8
VOUT
0
2
0.6
0.4
IOUT
4
6
50
0.2
0
50
150
100
t [μs]
0
200
5.
0.8
VOUT
0
2
0.6
0.4
IOUT
4
6
50
0.2
0
50
150
100
t [μs]
0
200
1.0
IOUT
4
6
500
0.5
0
500
1000
t [μs]
0
2000
1500
2
2.0
VOUT
0
2
1.5
1.0
IOUT
4
6
500
0.5
0
500
1000
t [μs]
0
2000
1500
VIN = 5.5 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 1000 mA
6
3.0
VON/OFF
4
2.5
IOUT [A]
VON/OFF [V] / VOUT [V]
S-1172B50
VIN = 5.5 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 100 mA
6
1.2
VON/OFF
4
1.0
2
1.5
VOUT
2
VIN = 4.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 1000 mA
6
3.0
VON/OFF
4
2.5
IOUT [A]
VON/OFF [V] / VOUT [V]
S-1172B30
VIN = 4.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 100 mA
6
1.2
VON/OFF
4
1.0
0
2.0
IOUT [A]
0.4
2.5
VON/OFF
IOUT [A]
0.6
VOUT
2
4
2
VOUT
2
2.0
1.5
0
2
1.0
IOUT
4
6
500
IOUT [A]
0
0.8
VON/OFF [V] / VOUT [V]
1.0
VON/OFF
VON/OFF [V] / VOUT [V]
4
2
VIN = 2.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 1000 mA
6
3.0
IOUT [A]
VON/OFF [V] / VOUT [V]
S-1172B10
VIN = 2.0 V, COUT = 4.7 F, CIN = 4.7 F, IOUT = 100 mA
6
1.2
VON/OFF [V] / VOUT [V]
4.
Rev.2.2_03
0.5
0
500
1000
t [μs]
0
2000
1500
Example of equivalent series resistance vs. Output current characteristics (Ta = 25°C)
CIN = CL = 4.7 F
100
RESR []
VIN
CIN
Stable
S-1172 Series
CL
ON/OFF
0
0.1
1000
VOUT
VSS
*1
RESR
IOUT [mA]
*1. CL: TAIYO YUDEN Co., Ltd. LMK316BJ475ML (4.7 F)
24
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
Rev.2.2_03
Marking Specifications
SOT-89-5
Top view
1
(1) to (3):
(4) to (6):
4
Product abbreviation (refer to Product name vs. Product code)
Lot number
(4) (5) (6)
5
(1) (2) (3)
1.
2
3
Product name vs. Product code
Product Name
S-1172B10-U5T1x
S-1172B11-U5T1x
S-1172B12-U5T1x
S-1172B1C-U5T1x
S-1172B13-U5T1x
S-1172B14-U5T1x
S-1172B15-U5T1x
S-1172B16-U5T1x
S-1172B17-U5T1x
S-1172B18-U5T1x
S-1172B1J-U5T1x
S-1172B19-U5T1x
S-1172B20-U5T1x
S-1172B21-U5T1x
S-1172B22-U5T1x
S-1172B23-U5T1x
S-1172B24-U5T1x
S-1172B25-U5T1x
S-1172B26-U5T1x
S-1172B27-U5T1x
S-1172B28-U5T1x
S-1172B2J-U5T1x
Product Code
(1)
(2)
(3)
S
O
A
S
O
B
S
O
C
S
P
S
S
O
D
S
O
E
S
O
F
S
O
G
S
O
H
S
O
I
S
O
J
S
O
K
S
O
L
S
O
M
S
O
N
S
O
O
S
O
P
S
O
Q
S
O
R
S
O
S
S
O
T
S
O
U
Product Name
S-1172B29-U5T1x
S-1172B30-U5T1x
S-1172B31-U5T1x
S-1172B32-U5T1x
S-1172B33-U5T1x
S-1172B34-U5T1x
S-1172B35-U5T1x
S-1172B36-U5T1x
S-1172B37-U5T1x
S-1172B38-U5T1x
S-1172B39-U5T1x
S-1172B40-U5T1x
S-1172B41-U5T1x
S-1172B42-U5T1x
S-1172B43-U5T1x
S-1172B44-U5T1x
S-1172B45-U5T1x
S-1172B46-U5T1x
S-1172B47-U5T1x
S-1172B48-U5T1x
S-1172B49-U5T1x
S-1172B50-U5T1x
Product Code
(1)
(2)
(3)
S
O
V
S
O
W
S
O
X
S
O
Y
S
O
Z
S
P
A
S
P
B
S
P
C
S
P
D
S
P
E
S
P
F
S
P
G
S
P
H
S
P
I
S
P
J
S
P
K
S
P
L
S
P
M
S
P
N
S
P
O
S
P
P
S
P
Q
Remark 1. x: G or U
2. Please select products of environmental code = U for Sn 100%, halogen-free products.
25
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
S-1172 Series
2.
HSOP-6
Top view
6
5
4
(1) (2) (3) (4) (5) (6)
(7) (8) (9) (10) (11) (12)
(13) (14) (15) (16)
1
26
2
3
(1) to (5):
(6):
(7) and (8):
(9):
(10) to (16):
Product name : S1172 (Fixed)
Product type
Value of output voltage
Blank
Lot number
Rev.2.2_03
4.5±0.1
1.5±0.1
1.6±0.2
5
4
0.3
45°
1
2
3
1.5±0.1 1.5±0.1
0.4±0.05
0.4±0.1
0.4±0.1
0.45±0.1
No. UP005-A-P-SD-2.0
TITLE
SOT895-A-PKG Dimensions
No.
UP005-A-P-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1(10 pitches : 40.0±0.2)
ø1.5 +0.1
-0
2.0±0.05
+0.1
ø1.5 -0
0.3±0.05
8.0±0.1
2.0±0.1
4.75±0.1
3 2 1
4
5
Feed direction
No. UP005-A-C-SD-2.0
TITLE
SOT895-A-Carrier Tape
UP005-A-C-SD-2.0
No.
ANGLE
UNIT
mm
ABLIC Inc.
16.5max.
13.0±0.3
Enlarged drawing in the central part
(60°)
(60°)
No. UP005-A-R-SD-1.1
TITLE
SOT895-A-Reel
No.
UP005-A-R-SD-1.1
ANGLE
UNIT
QTY.
mm
ABLIC Inc.
1,000
5.02±0.2
6
1
0.4±0.05
5
4
2
3
0.20±0.05
1.67±0.05
1.91
1.91
No. FH006-A-P-SD-2.1
TITLE
HSOP6-A-PKG Dimensions
No.
FH006-A-P-SD-2.1
ANGLE
UNIT
mm
ABLIC Inc.
4.0±0.1(10 pitches:40.0±0.2)
2.0±0.05
ø1.55±0.05
0.3±0.05
ø2.0±0.05
8.0±0.1
2.1±0.1
6.7±0.1
1
6
3
4
Feed direction
No. FH006-A-C-SD-2.0
TITLE
HSOP6-A-Carrier Tape
No.
FH006-A-C-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
60°
2±0.5
13.5±0.5
Enlarged drawing in the central part
ø21±0.8
2±0.5
ø13±0.2
No. FH006-A-R-SD-1.0
TITLE
HSOP6-A-Reel
No.
FH006-A-R-SD-1.0
ANGLE
QTY.
UNIT
mm
ABLIC Inc.
2,000
60°
2±0.5
13.5±0.5
Enlarged drawing in the central part
ø21±0.8
2±0.5
ø13±0.2
No. FH006-A-R-S1-1.0
TITLE
HSOP6-A-Reel
No.
FH006-A-R-S1-1.0
ANGLE
UNIT
QTY.
mm
ABLIC Inc.
4,000
2.03
0.76
1.91
1.91
No. FH006-A-L-SD-2.0
TITLE
HSOP6-A
-Land Recommendation
No.
FH006-A-L-SD-2.0
ANGLE
UNIT
mm
ABLIC Inc.
Disclaimers (Handling Precautions)
1.
All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2.
The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products
described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other
right due to the use of the information described herein.
3.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described
herein.
4.
Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to
the use of the products outside their specified ranges.
5.
Before using the products, confirm their applications, and the laws and regulations of the region or country where they
are used and verify suitability, safety and other factors for the intended use.
6.
When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related
laws, and follow the required procedures.
7.
The products are strictly prohibited from using, providing or exporting for the purposes of the development of
weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands
caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear,
biological or chemical weapons or missiles, or use any other military purposes.
8.
The products are not designed to be used as part of any device or equipment that may affect the human body, human
life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control
systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment,
aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by
ABLIC, Inc. Do not apply the products to the above listed devices and equipments.
ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of
the products.
9.
In general, semiconductor products may fail or malfunction with some probability. The user of the products should
therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread
prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social
damage, etc. that may ensue from the products' failure or malfunction.
The entire system in which the products are used must be sufficiently evaluated and judged whether the products are
allowed to apply for the system on customer's own responsibility.
10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the
product design by the customer depending on the intended use.
11. The products do not affect human health under normal use. However, they contain chemical substances and heavy
metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be
careful when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used.
13. The information described herein contains copyright information and know-how of ABLIC Inc. The information
described herein does not convey any license under any intellectual property rights or any other rights belonging to
ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this
document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express
permission of ABLIC Inc.
14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales
representative.
15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into
the English language and the Chinese language, shall be controlling.
2.4-2019.07
www.ablic.com
工商网监
湘ICP备2023018690号
