0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
VM148

VM148

  • 厂商:

    SITI

  • 封装:

  • 描述:

    VM148 - 130mA, 10Bit Current Sinking VCM Driver with I2C Interface - Silicon Touch Technology Inc.

  • 数据手册
  • 价格&库存
VM148 数据手册
11-VM148 Version Issue Date File Name Total Page : A.001 : 2009-05-19 : SP-VM148-A.001.doc : 17 130mA, 10Bit Current Sinking VCM Driver with I2C Interface 新竹市展業一路 9 號 7 樓之 1 SILICON TOUCH TECHNOLOGY INC. 9-7F-1, Prosperity Rd I, Science-Based Industrial Park Hsin-Chu, Taiwan 300, R.O.C. Tel:886-3-5645656 Fax:886-3-5645626 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 11-VM148 130mA, 10-Bit Current Sinking VCM Driver with I2C Interface General Specifications The 11-VM148 is a VCM(Voice Coil Motor) driver IC with I2C interface control that is capable of programmable sinking output current. It has a built-in internal voltage reference and operates with a supply voltage range from 2.4V to 5.5V. The DAC is controlled by a signal transmit through a 2-wire I2C serial interface which operates in an I2C fast mode (400 kHz). The 11-VM148 is designed for applications such as image stabilization, auto-focus, optical zoom in camera phones, and other portable module devices. Features and Benefits Programmable sinking output current I2C serial interface DAC with 10-BIT resolution 2.4V – 5.5V power source Low voltage control for digital pin PD, SDA, and SCL(i.e., VIH = 1.54V @ VDD = 2.8V) Power off operation Automatic power on reset Small package: DFN10 (3*3*0.8 mm), WLCSP(0.99*1.87*0.5 mm) Ordering Information Part Number 11-VM148 WLCSP 11-VM148 DFN *XX reserved for a data code **XXXX reserved for a date code Package WLCSP, 8Pin DFN, 10Pin Marking GXX* or HXX* XXXX**G SP-VM148 Version:001 Page:1 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Terminology Resolution The DAC resolution is defined by the power factor of 2, which defines the number of distinct analog levels. N-bit resolution -> 2N distinct analog levels Differential Nonlinearity (DNL) error The variation in analog step sizes away from 1 LSB by any two adjacent codes. Usually, gain and offset errors have been removed. Integral Nonlinearity (INL) It is the deviation of actual transfer response from a straight line. Usually, INL error is referred to as the maximum INL error. SP-VM148 Version:001 Page:2 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Pin Assignment Pin Assignment of DFN10 (3*3*0.8 mm) Pin Descriptions Pin NO. 1 2 Pin Name VDD PD Description Input Power Pin Digital Input: Power off Mode (When PD=High ,chip disable) ( When PD=Low ,chip enable) 3 4 5 6 7 8 9 10 1. NC VSS NC NC SDA SCL MVSS SINK I2C Interface Data(Serial Data Line) I2C Interface Data(Serial Clock Line) Input Motor driver GND Pin Analog Output : Output current Sink Pin Input Ground Pin The 7 address bits of 11-VM148 for I2C slave true port is 0001-1xx. Version:001 Page:3 SP-VM148 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Pin Assignment of WLCSP (0.99*1.87*0.5mm) TOP View Pin Number Pin Name SINK Description 1 2 3 4 5 6 7 Analog Output : Output Current Sink Pin Input Motor Driver GND Pin I2C Interface Data(Serial Clock Line) I2C Interface Data(Serial Data Line) Input Ground Pin Input Ground Pin Digital Input: Power off Mode (When PD=High ,chip disable) ( When PD=Low ,chip enable) MVSS SCL SDA VSS VSS PD 8 VDD Input Power Pin Absolute Maximum Ratings Unless otherwise noted, TA= 25℃ Characteristic Supply Input Voltage Input Voltage Maximum Sink Current Operating Temperature Range Storage Temperature Range Symbol VDD VIN ISINK TOPR TSTG Rating 5.5 VDD+0.4 150 -40 ~ 125 -65 ~ 150 Unit V V mA °C °C SP-VM148 Version:001 Page:4 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Electrical Characteristic Unless otherwise noted, TA= 25℃, VDD = 2.8 V and VCM ≈ 18Ω, 460uH. Item Power Supply Supply Voltage Supply Current ( IDD ) VDD IPD IDD IDD1 VIH VIL PD = High (chip disable) PD = Low, SPD= High PD = Low, SPD= Low 2.4 2.8 5 0.5 0.1 0.5 V uA mA mA Sym. Condition Limit Min. Typ. Max. Unit PD, SDA, SCL digital control pin Input Voltage High Input Voltage Low Parameters DAC Resolution DNL INL Output Offset Current Current Slew Rate Output Constant Current Settling Time Voltage Drop Note: (*1) SR = ΔI / Δt , ISINK is the current of sink pin IOS SR ts PD = L, SPD= logic H 10 +/-0.8 +/-1 +/-1 +/-5 5 3 40 80 Bits LSB LSB uA mA/us us 0.55*VDD -0.4 VDD+0.4 0.2*VDD V V SR = ΔI / Δt (*1) VDD = 2.8V, ISINK = 100mA ΔV ΔV = VSINK − VMVSS (*2) (@ISINK = 80 mA) - 0.32 0.35 V (*2): VSINK is the voltage of sink pin and VMVSS is the voltage of motor driver GND pin SP-VM148 Version:001 Page:5 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Block Diagram (DFN10) SP-VM148 Version:001 Page:6 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Data Format 11-VM148 Write Mode When in the write mode, data is written to the 11-VM148 and shifted byte-by-byte into a 16-bit input register. After all 16 bits of data have been shifted in, a STOP condition is transmit by master and the loaded data in the input register is transferred to the DAC. 11-VM148 Read Mode When 11-VM148 is in the read mode, data is read from IC to a master controller in the same bit order. SP-VM148 Version:001 Page:7 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Table MSB LSB 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 Serial Data Bits 7 Input Register R15 R14 R13 R12 R11 R10 R09 R08 R07 R06 R05 R04 R03 R02 R01 R00 SPD X D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 X X X X Function SPD (Soft Power off, 2nd standby mode): IC power off controlled by software. X denotes “Don’t care/Unused”. Regarding to all kinds of IC operation situations please refers to following table. PD High SPD Low Low High Soft power off IC status Power off IC Active The PD pin is the power off pin of 11-VM148. Logic low level (PD = Low) is for IC operation. On the other hand, its logic high level (PD = High) puts the chip into power off mode for power saving. It is recommended to keep PD at high level (PD = H) before while the chip is no operation to save power, especially for applications in portable devices. SP-VM148 Version:001 Page:8 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Performance Characteristics 1. DNL Plot Typical DNL Plot @VDD=2.8V, 25degree 2 1.5 1 0.5 DNL (LSB) 0 -0.5 -1 -1.5 -2 1 00 200 300 400 500 DIGITAL Code 600 700 800 900 1000 2. INL Plot Typical INL Plot @VDD=2.8V, 25degree 2 1.5 1 0.5 INL (LSB) 0 -0.5 -1 -1.5 -2 100 200 300 400 500 DIGITAL Code 600 700 800 900 1000 SP-VM148 Version:001 Page:9 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 3. Settling Time (VDD = 2.8V, VCM = 27Ohm with 430uH@500Hz, 550uH@1kHz, respectively, CL = 0.1uF @Temp. = 25) 4. Sink Current vs. Codes vs. Temp. Isink vs. Codes vs. Temp. 140 120 100 Isink (mA) 80 60 40 20 Temp. = -40 Temp. = 25 Temp. = 85 100 200 300 400 500 DIGITAL Code 600 700 800 900 1000 SP-VM148 Version:001 Page:10 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. 5. Full-Scale Programmable Current vs. Temp. vs. VDD Full-Scale Current vs. VDD vs. Temp. Temp. = -40 Temp. = 25 Temp. = 85 150 160 Full Scale Programmable Current (mA) 140 130 120 110 100 -40 -20 0 20 40 60 80 Temp. SP-VM148 Version:001 Page:11 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Application Circuit SP-VM148 Version:001 Page:12 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Application Notes The 11-VM148 is a constant current driving IC for applications in Auto-Focus. The supply voltage range VDD of 11-VM148 is from 2.4V to 5.5V. The input range of digital control pin PD, and digital I/O pins SCL and SDA, are defined such that logic “High” is from 0.55*VDD to VDD+0.4V and logic “Low” is from –0.4V to 0.2*VDD. Therefore, the three digital pins are suitable controlled by 1.8V ISP. The PD pin is the power off pin of 11-VM148. Logic low level (PD = Low) is for IC operation. On the other hand, its logic high level (PD = High) puts the chip into power off mode for power saving. It is recommended to keep PD at high level (PD = H) before while the chip is no operation to save power, especially for applications in portable devices. In order to ensure the stability of output current, a compensation capacitance CL is suggested placing across the two terminals of VCM. The suggested value of CL is about 0.1~0.22uF and could be fine tuned for different VCM. SP-VM148 Version:001 Page:13 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Package Specification (DFN-10) SYMBOL A A1 A3 b D D1 E E1 L e e1 SP-VM148 MIN. 0.70 0.00 0.18 2.90 2.10 2.90 1.10 0.45 DIMENSION (mm) NOM. 0.75 0.02 0.203 REF 0.25 3.00 2.20 3.00 1.20 0.55 0.50 BASIC 2.00 BASIC MAX. 0.80 0.05 0.30 3.10 2.30 3.10 1.30 0.65 MIN. 28 0 7 114 83 114 86 18 DIMENSION (mil) NOM. 30 0.8 8 REF 10 118 87 118 87 22 20 BASIC 80 BASIC MAX. 32 2 12 122 91 122 91 26 Version:001 Page:14 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. Package Specifications (WLCSP) Bottom View E D A2 L2 e2 A1 SYMBOL A A1 A2 b D E e1 e2 L1 L2 MIN. 0.445 0.17 0.275 0.24 1.83 0.95 0.160 0.220 DIMENSION (mm) NOM. 0.5 0.20 0.30 0.26 1.87 0.99 0.50 0.50 0.185 0.245 MAX. 0.555 0.23 0.325 0.28 1.91 1.03 0.210 0.270 SP-VM148 Version:001 A L1 e1 b Page:15 點晶科技股份有限公司 SILICON TOUCH TECHNOLOGY INC. The products listed herein are designed for ordinary electronic applications, such as electrical appliances, audio-visual equipment, communications devices and so on. Hence, it is advisable that the devices should not be used in medical instruments, surgical implants, aerospace machinery, nuclear power control systems, disaster/crime-prevention equipment and the like. Misusing those products may directly or indirectly endanger human life, or cause injury and property loss. Silicon Touch Technology, Inc. will not take any responsibilities regarding the misusage of the products mentioned above. Anyone who purchases any products described herein with the above-mentioned intention or with such misused applications should accept full responsibility and indemnify. Silicon Touch Technology, Inc. and its distributors and all their officers and employees shall defend jointly and severally against any and all claims and litigation and all damages, cost and expenses associated with such intention and manipulation. SP-VM148 Version:001 Page:16
VM148 价格&库存

很抱歉,暂时无法提供与“VM148”相匹配的价格&库存,您可以联系我们找货

免费人工找货