AA103-72LF

DATA SHEET AA103-72, AA103-72LF: GaAs IC 1-Bit Digital Attenuator 10 dB LSB LF–2.5 GHz Features G G G G G Pin Out J1 RF GND J2 CBL V2 Attenuation cutback of 10 dB Single positive 3 V control Low loss Low-cost SOT-5 plastic package Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020 1 2 10 5 CBP 4 CBL V1 10 kΩ 3 VS Description The AA103-72 is a 1-bit GaAs IC FET digital attenuator in a lowcost package. This attenuator has an LSB of 10 dB. The AA103-72 is particularly suited where high attenuation accuracy, low insertion loss, and low intermodulation products are required. Typical applications include cellular radio, wireless data, and wireless local loop gain level control circuits. DC blocking capacitors (CBL), bypass capacitor (CBP), and biasing resistor must be supplied externally for positive voltage operation. CBL, CBP = 33 pF for operation @ 900 MHz. NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Electrical Specifications at 25 °C (0, 3 V) Parameter(1) Insertion loss(2) Frequency LF–0.5 GHz LF–1.0 GHz LF–2.5 GHz LF–1.0 GHz LF–2.5 GHz VSWR (I/O) 1. All measurements made in a 50 Ω system, unless otherwise specified. 2. Insertion loss changes by 0.003 dB/°C. 3. Maximum attenuation includes insertion loss. Min. Typ. 0.3 0.3 0.4 10 Max. 0.5 0.6 0.7 Unit dB dB dB dB dB dB Attenuation range Attenuation accuracy(3) ± (0.25 + 3% of Attenuation setting) ± (0.4 + 5% of Attenuation setting) 1.2:1 1.4:1 LF–2.5 GHz Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200199 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 30, 2007 1 DATA SHEET • AA103-72, AA103-72LF Operating Characteristics at 25 °C (0, 3 V) Parameter Switching characteristics(1) Rise, fall On, off Video feedthru Input power for 1 dB compression Intermodulation intercept point (IP3) Condition 10/90% or 90/10% RF 50% CTL to 90/10% RF TRISE = 1 ns, BW = 500 MHz VS = 3 V VS = 5 V For two-tone input power 10 dBm VS = 3 V VS = 5 V VLOW = 0 to 0.2 V VHIGH = 3 V @ 25 µA typ. to 5 V @ 50 µA typ. 0.5–2.5 GHz 0.5–2.5 GHz 0.5–2.5 GHz 0.5–2.5 GHz Frequency Min. Typ. 150 300 70 20 26 41 45 Max. Unit ns ns mV dBm dBm dBm dBm Control voltages 1. Switching characteristics will vary with value chosen for CBP. Typical Performance Data (0, 3 V) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.5 1.0 1.5 2.0 2.5 1.8 1.7 1.6 1.5 Insertion Loss (S21, dB) VSWR 1.4 1.3 1.2 1.1 1.0 0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency 13 12 VSWR vs. Frequency Attenuation (S21, dB) 11 10 9 8 7 0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) Attenuation vs. Frequency Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 April 30, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200199 Rev. B DATA SHEET • AA103-72, AA103-72LF Absolute Maximum Ratings Characteristic RF input power Supply voltage Control voltage Operating temperature Storage temperature Value 1 W > 500 MHz 0/8 V 0.5 W @ 50 MHz 0/8 V 8V -0.2 V, +8 V -40 °C to +85 °C -65 °C to +150 °C Truth Table V1 VHIGH 0 All other conditions not recommended. VHIGH = 3 to 5 V (VS = VHIGH ± 0.2 V). V2 0 VHIGH J1–J2 Insertion Loss Attenuation SOT-5 0.074 (1.90 mm) Ref. 0.069 (1.75 mm) 0.052 (1.30 mm) Pin 1 0.020 (0.51 mm) 0.014 (0.35 mm) 0.012 (0.30 mm) 0.000 (0.00 mm) Min. 0.064 (1.63 mm) 0.035 (0.90 mm) 0.118 (3.00 mm) 0.087 (2.20 mm) Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. 0.037 (0.95 mm) Ref. 0.012 (0.30 mm) Typ. 0.024 (0.61 mm) 0.004 (0.10 mm) Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. 0.122 (3.10 mm) 0.106 (2.70 mm) 0.0104 (0.26 mm) 0.0035 (0.09 mm) Min. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200199 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • April 30, 2007 3 DATA SHEET • AA103-72, AA103-72LF Copyright © 2002, 2003, 2004, 2005, 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 April 30, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200199 Rev. B