SPD5552S

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD5550 Thru SPD5554 Series 5 AMPS, 200 thru 1000 VOLTS 2 μsec STANDARD RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD __ __ __ │ │ └ Screening 2/ ││ __ = Not Screened ││ TX = TX Level ││ TXV = TXV ││ S = S Level ││ │ └ Package Type __ = Axial Leaded │ SMS = Surface Mount Square Tab │ │ └ Voltage/Family 5550 = 200V 5551 = 400V 5552 = 600V 5553 = 800V 5554 = 1000V • • • • • • • • • • Standard Recovery: 2 μsec maximum PIV up to 1000 Volts Low Reverse Leakage Current Hermetically Sealed Single Chip Construction Replacement for 1N5550 thru 1N5554 Series Low Thermal Resistance For Higher Voltages-See SSDI p/n SDR6557 Series TX, TXV, and Space Level Screening Available Fast Recovery Versions Available. Contact Factory. FEATURES: MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage SPD5550 SPD5551 SPD5552 SPD5553 SPD5554 TEC=130oC (SMS) TL=30oC at .375” (Axial) TA=55oC PCB Mount Symbol VRRM VRWM VR Value 200 400 600 800 1000 5.0 1.3 1.3 100 -65 to +175 22 6.5 Units Volts Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave) IO Amps Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO, allow junction to reach equilibrium between pulses, TA=25oC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Lead, L = 0.375” (Axial Lead) Junction to End Tab (Surface Mount Axial Leaded (__) IFSM TOP & Tstg RθJL RθJE Amps o C o C/W Square Tab Surface Mount (SMS) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0112A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD5550 Thru SPD5554 Series ELECTRICAL CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 9 Amps, TA = 25oC, 300μsec Pulse) Reverse Leakage Current (At Rated VR, 300μsec pulse minimum) TA = 25oC TA = -55oC TA = 25oC TA = 100oC SPD5550 SPD5551 SPD5552 SPD5553 SPD5554 Symbol VF1 VF2 IR1 IR2 Min –– –– –– –– Max 1.20 1.50 5.0 20 –– –– –– –– Unit Volts Volts μA μA Breakdown Voltage (IR = 50 μA, TA = 25oC) Junction Capacitance (VR = 10 VDC, TA = 25oC, f = 1 MHz) Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA, TA = 25oC) Case Outline: (Axial) VBR 200 400 600 800 1000 –– –– DIM A B C D Volts CJ trr 50 2 MIN –– 0.210” 0.037” 1.00” pF μs MAX 0.170” 0.250” 0.043” –– Case Outline: (SMS) DIM A B C D MIN 0.170” 0.260” 0.020” 0.002” MAX 0.180” 0.300” 0.030” –– Note: Dimensions prior to soldering. NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0112A DOC