AD6C223

AD6C223 1 Form C Solid State Relay DESCRIPTION The AD6C223 is composed of two distinct relays; one normally open and one normally closed sharing a common input, making this a true 1 Form C device. Each relay has a bi-directional, single-throw contact controlled simultaneously by an LED driver. The driver activates an integrated circuit, which in turn drives each pair of DMOS transistors. These transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching lamps and highly inductive loads. FEATURES APPLICATIONS • • • • • • • True 1 Form C device Low input control power consumption (5mA MAX) 150mA maximum continuous load current 25 ohms maximum on-resistance (Form A) 25 ohms maximum on-resistance (Form B) High input-to-output isolation Long life/high reliability • • • • • Reed relay replacement Meter reading systems Medical equipment Battery monitoring Multiplexers OPTIONS/SUFFIXES* ABSOLUTE MAXIMUM RATINGS* PARAMETER Storage Temperature Operating Temperature Continuous Input Current Transient Input Current Normally Closed • • -S -TR Surface Mount Leadform Option Tape and Reel Option UNIT °C °C mA mA V mW MIN -55 -40 TYP MAX 125 85 50 400 NOTE: Suffixes listed above are not included in marking on device for part number identification. SCHEMATIC DIAGRAM + Input 1 6 - Input 2 5 Reverse Input Control Voltage Output Power Dissipation 6 600 Common 3 4 Normally Open *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliability. APPROVALS • • • BABT CERTIFICATE #607836: BS EN 60950, BS EN 41003, BS EN 60065 CSA CERTIFICATE #LR111581-1 UL FILE #E90096 © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 1 of 6 AD6C223 rev 1.40 (10/25/2004) AD6C223 1 Form C Solid State Relay ELECTRICAL CHARACTERISTICS - 25°C PARAMETER INPUT SPECIFICATIONS LED Forward Voltage LED Reverse Voltage Turn-On Current (Form A) Turn-On Current (Form B) Turn-Off Current (Form A) Turn-Off Current (Form B) V V mA mA mA mA 6 1.2 12 2 0.5 0.5 2 5 Io = 150mA 5 1.5 If = 5mA Ir = 10uA Io = 150mA UNIT MIN TYP MAX TEST CONDITIONS OUTPUT SPECIFICATIONS (NORMALLY OPEN) Blocking Voltage Continuous Load Current On-Resistance Leakage Current Output Capacitance Offset Voltage Turn-On Time Turn-Off Time V mA Ω µA pF mV ms ms 0.5 0.05 17 0.2 25 400 150 25 1 50 0.2 5 5 Io = 1uA If = 5mA Io = 150mA Vo = 400V Vo = 25V, f = 1.0MHz If = 5mA If = 5mA, Io = 150mA If = 0mA, Io = 150mA OUTPUT SPECIFICATIONS (NORMALLY CLOSED) Blocking Voltage Continuous Load Current On-Resistance Leakage Current Output Capacitance Offset Voltage Turn-On Time Turn-Off Time V mA Ω µA pF mV ms ms 0.5 0.5 22 0.2 15 400 150 25 1 20 0.2 5 5 If = 0mA, Io = 150mA If = 5mA, Io = 150mA Io = 1uA If = 0mA Io = 150mA Vo = 400V Vo = 25V, f = 1.0MHz COUPLED SPECIFICATIONS Isolation Voltage -H Suffix Isolation Resistance Coupled Capacitance Contact Transient Ratio V V GΩ pF V/ µs 2000 7000 2500 3750 100 2 dV = 50V T = 1 minute T = 1 minute © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 2 of 6 AD6C223 rev 1.40 (10/25/2004) AD6C223 1 Form C Solid State Relay PERFORMANCE DATA AD6C223 - Normally Open Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C AD6C223 - Normally Open Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C 60 50 40 30 20 10 0 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 Turn-On Tim e (m s) 50 Device Count 40 30 20 10 0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 Turn-Off Tim e (m s) Device Count AD6C223 - Normally Open Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C AD6C223 - Normally Open Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C 40 Device Count Device Count 15.5 16 16.5 17 17.5 18 18.5 19 30 20 10 0 On-Resistance (ohm s) 50 40 30 20 10 0 0.13 0.15 0.18 0.2 0.23 0.25 0.28 0.3 Leakage Current (uA) AD6C223 - Normally Open Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C AD6C223 - Normally Open Maximum Load Current vs. Temperature 40 30 20 10 0 380 400 420 440 460 480 500 520 Blocking Voltage (V) Load Current (mA) 50 Device Count 200 150 100 50 0 20 40 60 -4 0 -2 0 80 0 Tem perature (C) © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 3 of 6 AD6C223 rev 1.40 (10/25/2004) AD6C223 1 Form C Solid State Relay AD6C223 - Normally Closed Typical Turn-On Time Distribution N = 100, Ambient Temperature = 25°C AD6C223 - Normally Closed Typical Turn-Off Time Distribution N = 100, Ambient Temperature = 25°C 50 Device Count 40 30 20 10 0 0.35 0.4 0.45 0.5 0.55 0.6 0.65 0.7 Turn-On Tim e (m s) Device Count 50 40 30 20 10 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Turn-Off Tim e (m s) AD6C223 - Normally Closed Typical On-Resistance Distribution N = 100, Ambient Temperature = 25°C AD6C223 - Normally Closed Typical Leakage Current Distribution N = 100, Ambient Temperature = 25°C 60 50 40 30 20 10 0 19 20 21 22 23 24 25 26 On-Resistance (ohm s) 60 50 40 30 20 10 0 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Leakage Current (uA) Device Count AD6C223 - Normally Closed Typical Blocking Voltage Distribution N = 100, Ambient Temperature = 25°C Device Count AD6C223 - Normally Closed Typical Load Current vs. Temperature 40 30 20 10 0 400 410 420 430 440 450 460 470 Blocking Voltage (V) Load Current (mA) 50 Device Count 200 150 100 50 0 20 40 60 -4 0 -2 0 80 0 Tem perature (C) © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 4 of 6 AD6C223 rev 1.40 (10/25/2004) AD6C223 1 Form C Solid State Relay MECHANICAL DIMENSIONS 6 PIN DUAL IN-LINE PACKAGE 6 PIN SURFACE MOUNT DEVICE END VIEW END VIEW TOP VIEW TOP VIEW BOTTOM VIEW/ BOARD PATTERN BOTTOM VIEW/ BOARD PATTERN © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 5 of 6 AD6C223 rev 1.40 (10/25/2004) AD6C223 1 Form C Solid State Relay DISCLAIMER Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notice. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. LIFE SUPPORT POLICY SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. © 2004 Solid State Optronics • San José, CA www.ssousa.com • +1.408.293.4600 Page 6 of 6 AD6C223 rev 1.40 (10/25/2004)