STM7E1AR

STM7E1 7 e 1 channels switch array Features ■ ■ ■ ■ Main switches max. RON less than 2 Ω Provides 7 auxiliary switches with RON < 75 Ω 6 VPP amplitude of analog input signal Digital inputs are TTL levels compatible Description The STM7E1A consists of 7 identical ISDN E1 channels, each channel corresponding to 4 main low-resistant switches (a and b) and 2 auxiliary switches (c and d). The switches positions in all the channels are identical and controlled by a unique control resource driven by the digital inputs Lm, Ls and Sc. In each channel, the TX and RX lines can be switched between a Main port or a Spare-port by the main switches: if both "a" switches are closed and both "b" switches are open, the Main port is connected to the line, while if both "a" switches are open and both "b' switches are closed, the spare port is connected to the line. The 2 auxiliary switches enable to close a local loop between the TX and RX access of a port: if "c" is closed, the Spare port RX and TX access is connected between each other to form a local loop, while if "d" is closed, the Main port RX and TX access is connected between each other to form a local loop. The Spare port is only used for test purpose on the system board while the Main port is the communication channel. Consequently, a switching from the Main port to the Spare port occurs very rarely (