0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
TL084BID

TL084BID

  • 厂商:

    STMICROELECTRONICS(意法半导体)

  • 封装:

  • 描述:

    TL084BID - General purpose JFET quad operational amplifier - STMicroelectronics

  • 数据手册
  • 价格&库存
TL084BID 数据手册
TL084 General purpose JFET quad operational amplifier Features ■ ■ ■ ■ ■ ■ ■ Wide common-mode (up to VCC+) and differential voltage range Low input bias and offset current Output short-circuit protection High input impedance JFET input stage Internal frequency compensation Latch up free operation High slew rate: 16V/µs (typ) N DIP14 (Plastic package) Description The TL084, TL084A and TL084B are high-speed JFET input quad operational amplifiers incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset voltage temperature coefficient. D TSSOP-14 (Thin shrink small outline package) D SO-14 (Plastic micropackage) Pin connections (Top view) Output 1 1 Inverting Input 1 2 Non-inverting Input 1 3 VCC + 4 Non-inverting Input 2 5 Inverting Input 2 6 Output 2 7 + + + + 14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VCC 10 Non-inverting Input 3 9 8 Inverting Input 3 Output 3 July 2007 Rev 2 1/16 www.st.com 16 Schematic diagram TL084 1 Figure 1. Schematic diagram Circuit schematics (for each amplifier) VCC Non-inverting input Inverting input 1 0 0Ω 2 0 0Ω Output 1 0 0Ω 30k 8.2k 1.3k VCC 35k 1.3k 35k 1 0 0Ω 2/16 TL084 Absolute maximum ratings and operating conditions 2 Table 1. Symbol VCC Vi Vid Absolute maximum ratings and operating conditions Absolute maximum ratings Value Parameter TL084M, AM, BM TL084I, AI, BI Supply voltage (1) Input voltage (2) Unit TL084C, AC, BC V V V ±18 ±15 ±30 Differential input voltage (3) Thermal resistance junction to ambient(4) (5) SO-14 DIP14 TSSOP14 Thermal resistance junction to case(4) (5) SO-14 DIP14 TSSOP14 Power dissipation Output short-circuit duration (6) Rthja 105 80 100 °C/W Rthjc 31 33 32 680 Infinite -55 to +125 -40 to +105 -65 to +150 1000 150 1500 0 to +70 °C/W Ptot mW Toper Tstg Operating free-air temperature range Storage temperature range HBM: human body model(7) °C °C ESD MM: machine model(8) CDM: charged device model(9) V 1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages where the zero reference level is the midpoint between VCC+ and VCC-. 2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less. 3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 4. Short-circuits can cause excessive heating and destructive dissipation. 5. Rth are typical values. 6. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. 7. Human body model: 100pF discharged through a 1.5kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 8. Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5Ω), done for all couples of pin combinations with other pins floating. 9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground. Table 2. Symbol VCC Toper Operating conditions Parameter Supply voltage range Operating free-air temperature range -55 to +125 TL084M, AM, BM TL084I, AI, BI 6 to 36 -40 to +105 0 to +70 TL084C, AC, BC Unit V °C 3/16 Electrical characteristics TL084 3 Table 3. Symbol Electrical characteristics VCC = ±15V, Tamb = +25°C (unless otherwise specified) Parameter TL084I,M,AC,AI,AM, BC,BI,BM Min. Input offset voltage (Rs = 50Ω) TL084 Tamb = +25°C TL084A TL084B Tmin ≤ Tamb ≤ Tmax TL084 TL084A TL084B Input offset voltage drift Input offset current Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Input bias current (1) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Large signal voltage gain (RL = 2kΩ Vo =±10V) , Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Supply voltage rejection ratio (RS = 50Ω) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Supply current, no load Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Input common mode voltage range Common mode rejection ratio (RS = 50Ω) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Output short-circuit current Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Output voltage swing Tamb = +25°C Tmin ≤Tamb ≤Tmax RL = 2kΩ RL = 10kΩ RL = 2kΩ RL = 10kΩ ±11 50 25 80 80 Typ. Max. Min. TL084C Unit Typ. Max. Vio 3 3 1 10 6 3 13 7 5 3 10 mV 13 DVio Iio 10 5 100 4 200 20 25 15 70 70 10 5 100 4 200 20 μV/°C pA nA pA nA V/mV Iib 20 30 Avd 200 200 SVR 86 86 dB ICC 1.4 +15 -12 86 2.5 2.5 ±11 1.4 +15 -12 86 2.5 2.5 mA Vicm V CMR 80 80 10 10 10 12 10 12 8 70 70 60 60 10 10 10 12 10 12 8 dB Ios 40 40 60 60 mA ±Vopp 12 13.5 12 13.5 V SR Slew rate (Tamb = +25°C) , Vin = 10V, RL = 2kΩ CL = 100pF, unity gain 16 16 V/μs 4/16 TL084 Table 3. Symbol Electrical characteristics VCC = ±15V, Tamb = +25°C (unless otherwise specified) (continued) Parameter TL084I,M,AC,AI,AM, BC,BI,BM Min. Typ. 0.1 10 2.5 4 1012 0.01 2.5 Max. Min. TL084C Unit Typ. 0.1 10 4 1012 0.01 Max. μs % MHz Ω % tr Kov GBP Ri THD Rise time (Tamb = +25°C) , Vin = 20mV, RL = 2kΩ CL = 100pF, unity gain Overshoot (Tamb = +25°C) , Vin = 20mV, RL = 2kΩ CL = 100pF, unity gain Gain bandwidth product (Tamb = +25°C) , Vin = 10mV, RL = 2kΩ CL = 100pF, f= 100kHz Input resistance Total harmonic distortion (Tamb = +25°C, ,C f= 1kHz, RL = 2kΩ L = 100pF, Av = 20dB, Vo = 2Vpp) Equivalent input noise voltage RS = 100Ω, f = 1KHz Phase margin Channel separation Av = 100 en ∅m Vo1/Vo2 15 45 120 15 45 120 nV ----------Hz degrees dB 1. The input bias currents are junction leakage currents which approximately double for every 10°C increase in the junction temperature. 5/16 Electrical characteristics TL084 Figure 2. Maximum peak-to-peak output voltage versus frequency Figure 3. Maximum peak-to-peak output voltage versus frequency Figure 4. Maximum peak-to-peak output voltage versus frequency Figure 5. Maximum peak-to-peak output voltage versus free air temperature Figure 6. Maximum peak-to-peak output voltage versus load resistance Figure 7. Maximum peak-to-peak output voltage versus supply voltage MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE (V) 30 25 RL = 10 kΩ Tamb = +25˚C 20 15 10 5 0 2 4 6 8 10 12 SUPPLY VOLTAGE ( V) 14 16 6/16 TL084 Electrical characteristics Figure 8. Input bias current versus free air temperature Figure 9. Large signal differential voltage amplification versus free air temperature 100 V CC = INPUT BIAS CURRENT (nA) 10 1 0.1 15V DIFFERENTIAL VOLTAGE AMPLIFICATION (V/V) 1000 400 200 100 40 20 10 4 2 1 -25 0 25 50 75 100 125 TEMPERATURE (˚C) -75 V CC = 15V V O = 10V R L = 2k Ω -50 -25 0 25 50 75 100 125 0.01 -50 TEMPERATURE (˚C) Figure 10. Large signal differential voltage amplification and phase shift versus frequency Figure 11. Total power dissipation versus free air temperature PHASE SHIFT (right scale) DIFFERENTIAL VOLTAGE AMPLIFICATION (left scale) 180 10 1 100 R = 2kW L C L = 100pF V CC = 15V T amb = +125°C 1K 10K 100K 1M 10M FREQUENCY (Hz) 90 0 TOTAL POWER DISSIPATION (mW) 100 250 225 200 175 150 125 100 75 50 25 0 -75 -50 -25 0 25 50 TEMPERATURE (˚C) DIFFERENTIAL VOLTAGE AMPLIFICATION (V/V) V CC = 15V No signal No load 75 100 125 Figure 12. Supply current per amplifier versus Figure 13. Supply current per amplifier versus free air temperature supply voltage 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -75 -50 -25 0 25 50 TEMPERATURE (˚C) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 SUPPLY CURRENT (mA) SUPPLY CURRENT (mA) V CC = 15V No signal No load Tamb = +25˚C No signal No load 75 100 125 2 4 6 10 12 14 8 SUPPLY VOLTAGE ( V) 16 7/16 Electrical characteristics TL084 Figure 14. Common mode rejection ratio versus free air temperature 89 COMMON MODE MODE REJECTION RATIO (dB) 88 87 86 85 84 83 -75 -50 -25 0 25 50 75 100 125 R L = 10 kΩ VC C = 15V Figure 15. Voltage follower large signal pulse response INPUT AND OUTPUT VOLTAGES (V) 6 4 2 0 -2 -4 -6 0 VCC= OUTPUT INPUT 15V R L = 2 kW C L= 100pF Tamb = +25°C 0.5 1 1.5 2 2.5 3 3.5 TEMPERATURE (˚C) TIME (ms) Figure 16. Output voltage versus elapsed time Figure 17. Equivalent input noise voltage versus frequency 28 24 20 16 12 8 4 10% 70 EQUIVALENT INPUT NOISE VOLTAGE (nV/VHz) OVERSHOOT 90% 60 50 40 30 20 10 0 10 40 100 400 1k OUTPUT VOLTAGE (mV) VCC = 15V A V = 10 R S = 100 Ω T amb = +25˚C V CC = 15V tr 0 0.1 0.2 0.3 0.4 TIME ( μs) R L = 2k Ω Tamb = +25˚C 0.5 0.6 0.7 0 -4 4k 10k 40k 100k FREQUENCY (Hz) Figure 18. Total harmonic distortion versus frequency 1 TOTAL HARMONIC DISTORTION (%) 0.4 0.1 0.04 0.01 0.004 0.001 100 400 1k 4k 10k 40k 100k FREQUENCY (Hz) V V = = 15V 15V CC CC 1 A A V= = 1 V V V O (rms) = 6V O (rms) = 6V T amb = = +25˚C T amb +25˚C 8/16 TL084 Typical applications Parameter measurement information Figure 19. Voltage follower Figure 20. Gain-of-10 inverting amplifier 10k Ω 1k Ω eI - 1/4 TL084 eo RL CL = 100pF 4 Typical applications Figure 21. Audio distribution amplifier fO = 100kHz 1M Ω 1 μF Input 100k Ω 100k Ω 100k Ω 100k Ω 1/4 TL084 1/4 TL084 Output A 1/4 TL084 Output B 1OO μF V CC+ 1/4 TL084 Output C 9/16 Typical applications Figure 22. Positive feeback bandpass filter 16k Ω 22 0p F 43k Ω Input 43k Ω 22 0p F 1/4 TL 08 4 43k Ω 1/4 TL 08 4 30k Ω 43k Ω 22 0p F 1/4 TL 08 4 43k Ω 1/4 TL 08 4 220 pF 43k Ω 30k Ω 16k Ω TL084 1.5 k Ω 1.5 k Ω Output B Ground Output A Figure 23. Output A Figure 24. Output B Second order bandpass filter fo = 100kHz; Q = 30; Gain = 4 Cascaded bandpass filter fo = 100kHz; Q = 69; Gain = 16 10/16 TL084 Package information 5 Package information In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. Figure 25. TSSOP14 package mechanical data Dimensions Ref. Min. A A1 A2 b c D E E1 e K L 0° 0.45 0.60 0.05 0.8 0.19 0.09 4.9 6.2 4.3 5 6.4 4.4 0.65 BSC 8° 0.75 0° 0.018 0.024 1 Millimeters Typ. Max. 1.2 0.15 1.05 0.30 0.20 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 0.197 0.252 0.173 0.0256 BSC 8° 0.030 0.004 0.039 Min. Inches Typ. Max. 0.047 0.006 0.041 0.012 0.0089 0.201 0.260 0.176 A A2 A1 b e K c L E D E1 PIN 1 IDENTIFICATION 1 11/16 Package information Figure 26. DIP14 package mechanical data Dimensions Ref. Min. a1 B b b1 D E e e3 F I L Z 1.27 3.3 2.54 0.050 8.5 2.54 15.24 7.1 5.1 0.130 0.51 1.39 0.5 0.25 20 0.335 0.100 0.600 1.65 Millimeters Typ. Max. Min. 0.020 0.055 0.020 0.010 Inches Typ. TL084 Max. 0.065 0.787 0.280 0.201 0.100 12/16 TL084 Figure 27. SO-14 package mechanical data Dimensions Ref. Min. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 8.55 5.8 1.27 7.62 4.0 5.3 1.27 0.68 8° (max.) 0.149 0.181 0.019 8.75 6.2 0.35 0.19 0.5 45° (typ.) 0.336 0.228 0.1 Millimeters Typ. Max. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.003 Min. Package information Inches Typ. Max. 0.068 0.007 0.064 0.018 0.010 0.019 0.344 0.244 0.050 0.300 0.157 0.208 0.050 0.026 13/16 Ordering information TL084 6 Ordering information Table 4. Order codes Temperature range Package Packing Marking TL084MN TL084AMN TL084BMN 084M 084AM 084BM 084M 084AM 084BM TL084IN TL084AIN TL084BIN 084I 084AI 084BI 084I 084AI 084BI TL084CN TL084ACN TL084BCN 084C 084AC 084BC 084C 084AC 084BC Part number TL084MN TL084AMN TL084BMN TL084MD/MDT TL084AMD/AMDT TL084BMD/BMDT TL084MP/MPT TL084AMP/AMPT TL084BMP/BMPT TL084IN TL084AIN TL084BIN TL084ID/IDT TL084AID/AIDT TL084BID/BIDT TL084IP/IPT TL084AIP/AIPT TL084BIP/BIPT TL084CN TL084ACN TL084BCN TL084CD/CDT TL084ACD/ACDT TL084BCD/BCDT TL084CP/CPT TL084ACP/ACPT TL084BCP/BCPT DIP14 Tube -55°C, +125°C SO-14 Tube or tape & reel Tube or tape & reel TSSOP14 DIP14 Tube -40°C, +105°C SO-14 Tube or tape & reel TSSOP14 Tube or tape & reel DIP14 Tube 0°C, +70°C SO-14 Tube or tape & reel TSSOP14 Tube or tape & reel 14/16 TL084 Revision history 7 Revision history Table 5. Date 28-Mar-2001 Document revision history Revision 1 Initial release. Added values for Rthja, Rthjc and ESD in Table 1: Absolute maximum ratings. Added Table 2: Operating conditions. Expanded Table 4: Order codes. Template update. Changes 30-Jul-2007 2 15/16 TL084 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16
TL084BID 价格&库存

很抱歉,暂时无法提供与“TL084BID”相匹配的价格&库存,您可以联系我们找货

免费人工找货
TL084BIDT
  •  国内价格
  • 1+5.11559
  • 30+4.93919
  • 100+4.58639
  • 500+4.2336
  • 1000+4.0572

库存:0