0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
J5NA782M0P1H6-Z

J5NA782M0P1H6-Z

  • 厂商:

    TAIYO-YUDEN(太诱)

  • 封装:

    SMD9

  • 描述:

    RF DUPLEXER 745MHZ/782MHZ 9SMD

  • 数据手册
  • 价格&库存
J5NA782M0P1H6-Z 数据手册
Notice for TAIYO YUDEN products  Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product information in this catalog is as of October 2014. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. ■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification is available. ■ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ■ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called“TAIYO YUDEN’ s official sales channel” ). It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel. ■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights. ■ Caution for export Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations” , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 15 SAW/FBAR DEVICES for MOBILE COMMUNICATIONS REFLOW ■ ORDERING CODE (A) Previous Rule (applied to products registered on March 31, 2010 or before.) F A R − D 6 N F − 1 G 9 6 0 0 − P 1 B Z − Z ❶ ❷ ❶Family ❸ ❹ ❷Common sign − Fixation ❺ ❻ ❼ ❹Package type ❼Frequency ❺Product type HIGH FREQUENCY PRODUCTS ❸Series Product Frequency Range D5 Duplexer 700-1000MHz D6 Duplexer 1000-5000MHz 700-1000MHz J5 Dual Duplexers F5 Device 700-1000MHz F6 Device 1000-5000MHz G5 Dual Devices 700-1000MHz G6 Dual Devices 1000-5000MHz ❽ ❾ ❿ ❽Common sign − Fixation ❻Common sign − Fixation ⓫ ⓬ ❿Serial Number ❾Design ⓫Custom, Status ⓬Packing (B) New Rule (applied to products registered on April 1, 2010 or later.) D 6 N F 1 G 9 6 0 P 1 B Z − Z ❶ ❷ ❶Series Product Frequency Range D5 Duplexer 700-1000MHz D6 Duplexer 1000-5000MHz J5 Dual Duplexers 700-1000MHz F5 Device 700-1000MHz F6 Device 1000-5000MHz G5 Dual Devices 700-1000MHz G6 Dual Devices 1000-5000MHz ❸ ❹ ❷Package type ❺ ❹Frequency ❻ ❺Design ❼ ❽ ❻Serial Number ❸Product type ❽Packing ❼Custom *For further details, please contact to TAIYO YUDEN Co.,Ltd. ■ EXTERNAL DIMENSIONS/STANDARD QUANTITY 2.5×2.0×0.6 (8pin) 2.5×2.0×0.6 (9pin) 0.6max 2.5±0.1 2.5×2.0×0.65 0.6max 2.5±0.1 2.0±0.1 2.0±0.1 index index 4-0.9625 2-0.3 0.9×0.375 4-0.7375 Unit:mm 1.4×1.0×0.5 1.40±0.1 Unit:mm 1.00±0.1 0.50 1.40±0.1 index 1.41 0.40 0.5 Unit:mm 0.25 0.25 0.575 0.25 1.00 0.25 Unit:mm 0.39 0.60 0.25 0.25 0.25 0.2 1.17 0.47 0.60 0.325 1.10±0.1 index 0.40 0.5max 1.50±0.1 0.5max 0.20 0.325 1.5×1.1×0.5 0.5max 0.90±0.1 0.25 Unit:mm 8-0.30 1.8×1.4×0.5 index 0.50 Unit:mm 8-0.425 1.80±0.1 1.10±0.1 index C0.15 8-0.30 1.1×0.9×0.5 0.5max 0.60×0.30 4-0.575 8-0.375 8-0.425 2-0.325 C0.15 8-0.375 8-0.425 4-0.775 0.9×0.375 4-0.7375 C0.15 8-0.375 1.6±0.1 index 4-0.9625 2-0.3 C0.15 4-0.7375 0.5max 2.0±0.1 2.0±0.1 index 4-0.9625 2.0×1.6×0.5 0.65max 2.5±0.1 0.24 0.23 0.39 0.78 0.25 0.49 0.18 0.18 Unit:mm 0.18 0.21 0.21 Unit:mm ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 136 15 ■ PART NUMBERS ●Duplexers System W-CDMA Band 1 PCS/W-CDMA Band 2 W-CDMA Band 4 CDMA/W-CDMA Band 5 W-CDMA Band 8 LTE Band 17 D6PE2G140P3AW D6RB2G140E1AJ FAR-D6NH-1G9600-M1Z9 FAR-D6NH-1G9600-M1Z6 FAR-D6NF-1G9600-P1BT D6NF1G960P1BR D6HH1G960BH95 D6PE1G960P3BY D6PE2G132P3DWB FAR-D5NG-881M50-M11Z FAR-D5PF-881M50-M3E9 FAR-D5NE-881M50-P1A9 FAR-D5NE-881M50-P1A6Q FAR-D5PE-881M50-P3EZ FAR-D5PE-881M50-P3EY D5NL881M5P1HY FAR-D5NH-942M50-M1Y9 FAR-D5NF-942M50-P1GWQ D5PF942M5M3G9 D5PE942M5P3GT D5PE782M0M3P9 D5NL782M0P1JZ Package Size (mm) 2.0×1.6×0.5 1.8×1.4×0.5 2.5×2.0×0.65 2.5×2.0×0.65 2.5×2.0×0.65 2.5×2.0×0.65 2.5×2.0×0.65 2.0×1.6×0.57 2.0×1.6×0.5 2.5×2.0×0.6 2.0×1.6×0.5 2.5×2.0×0.6 2.5×2.0×0.6 2.0×1.6×0.5 2.0×1.6×0.5 3.0×2.5×0.7 2.5×2.0×0.65 2.5×2.0×0.65 2.0×1.6×0.5 2.0×1.6×0.5 2.0×1.6×0.5 3.0×2.5×0.7 Insertion Loss (dB) 1.5/1.6 1.7/1.8 2.2/3.1 2.3/2.7 2.5/2.8 2.5/3.4 2.3/2.5 2.0/3.1 1.8/1.8 1.45/1.8 1.5/1.8 1.6/1.8 1.6/1.7 1.4/1.7 1.4/1.7 1.6/2.6 1.8/2.3 1.9/2.3 1.9/2.2 1.7/2.2 1.6/2.0 1.9/2.2 Isolation(dB) Remarks 59/47 57/48 55/50 55/53 54/55 58/53 56/53 57/53 55/50 66/52 58/51 57/51 60/53 59/52 59/52 60/51 58/50 59/54 60/52 58/54 53/64 66/52 9 Pin, B Type Rx : Bal.100ohm 8 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, B Type Low Rx IL 9 Pin, B Type 100ohm, Low Rx IL 9 Pin, B Type Rx : Bal.100ohm High GPS Att. & Rx Isol. 9 Pin, B Type 100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, A Type Rx : Bal.100ohm SV-LTE 9 Pin, B Type 9 Pin, B Type 100ohm, GPS High Att. 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type SV-LTE FAR-D5NE-740M00-P1C9 2.5×2.0×0.6 1.7/2.0 61/58 9 Pin, B Type Rx : Bal.100ohm D5PE740M0P3NZ 2.0×1.6×0.5 1.9/2.0 63/60 9 Pin, B Type Rx : Bal.100ohm LTE Band 20 D5NE847M0P1K9 2.5×2.0×0.6 2.1/2.3 52/51 9 Pin, B Type Rx : Bal.100ohm LTE Band 21 D6PE1G503P3KW 2.0×1.6×0.5 1.6/2.0 55/56 9 Pin, B Type Rx : Bal.100ohm LTE Band 26 LTE Band 28 CDMA BC0+BC10 D5PE876M5P3UZ 2.0×1.6×0.5 2.2/2.6 60/49 9 Pin, B Type Rx : Bal.100ohm D5PF773M0M3Y6 2.0×1.6×0.5 1.8/2.3 60/53 Block A 9Pin, B Type D5PF788M0M3Y9 2.0x1.6x0.5 1.8/2.4 60/54 Block B 9Pin, B Type D5NF878M0P1ET D5PE878M0P3UT 2.5×2.0×0.65 2.0×1.6×0.5 1.9/2.5 1.9/2.2 58/50 59/51 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm ●CDMA/GSM850/Band 5 System CDMA Tx CDMA/GSM850 Tx CDMA/W-CDMA Band 5 Rx GSM850/CDMA Rx GSM850 Rx Part number FAR-F5KB-836M50-B4ER FAR-F5KB-836M50-B4EG F5QA836M5M2AR FAR-F5KA-836M50-D4DF FAR-F5KB-881M50-B4ED FAR-F5KY-881M50-B4UZ FAR-F5KB-881M50-B4EJ FAR-F5QB-881M50-P2BG F5QG881M5P2KG FAR-F5KA-881M50-D4DB FAR-F5QA-881M50-M2AF FAR-F5KB-881M50-B4EA FAR-F5QB-881M50-P2BA Package Size (mm) 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.1×0.9×0.5 Insertion Loss (dB) 1.7 1.6 1.9 1.9 1.5 1.5 1.4 1.5 1.5 1.7 1.6 1.7 1.3 Package Size (mm) 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 Package Size (mm) 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 Attenuation(dB) Remarks 44 42 45 44 61 61 64 60 56 56 46 53 63 100ohm input 200ohm input High Att. High Att. 100ohm output 100ohm, High Att. 200ohm output 100ohm output 100ohm, High Att., Low Loss High Att. 150ohm output 150ohm output Insertion Loss (dB) 2.3 1.4 2.1 Attenuation(dB) Remarks 43 20 53 High Att. Low IL 100ohm output Insertion Loss (dB) 2.2 2.6 2.3 2.0 1.6 2.4 1.6 1.9 2.0 2.2 Attenuation(dB) Remarks 16 38 18 34 26 29 28 53 57 56 High Att. High Att. − High Att. 150ohm output 100ohm output 150ohm output High Att. 100ohm, High Att. 100ohm, High Att. HIGH FREQUENCY PRODUCTS LTE Band 13 Part number ●CDMA2000 BC0+BC10 System CDMA2000 BC0+10 Tx CDMA2000 BC0+10 Rx Part number F5KA833M0D4DU F5KA833M0D4MG F5KY878M0B4ND ●GSM/EGSM/Band 8 System EGSM Tx EGSM Rx W-CDMA/LTE Band 8 Part number FAR-F5KA-897M50-D4DC FAR-F5KA-897M50-D4VW F5QA897M5M2AC FAR-F5KA-942M50-D4DD FAR-F5KB-942M50-B4EB FAR-F5KB-942M50-B4ES FAR-F5QB-942M50-P2BB F5KA942M5D4MYB FAR-F5KY-942M50-B4UW F5QG942M5P2KB ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 15 137 ■ PART NUMBERS ●DCS/Band 3 Package Size (mm) 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.1×0.9×0.5 1.4×1.0×0.5 Insertion Loss (dB) 2.5 2.1 2.1 1.5 1.8 1.6 3.0 Attenuation(dB) Remarks 30 22 20 14 15 17 50 150ohm output 100ohm 150ohm 100ohm, High Att. Package Size (mm) 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 Insertion Loss (dB) 2.4 2.3 1.7 3.4 2.1 2.9 2.8 2.8 2.0 1.6 1.5 Attenuation(dB) Remarks 35 28 20 43 23 49 50 44 18 18 15 High Att. 100ohm input High Att. 100ohm output 100ohm, High Att. 100ohm output 100ohm output Insertion Loss (dB) 1.5/1.8 Attenuation(dB) Remarks FAR-G5QC-942M50-N2FB Package Size (mm) 1.5×1.1×0.5 50/29 GSM850 150ohm output EGSM 150ohm output FAR-G5KT-942M50-Y4RW 1.8×1.4×0.5 1.9/2.2 50/25 GSM850 150ohm output EGSM 150ohm output FAR-G5KW-942M50-Y4YD 1.8×1.4×0.5 2.5/1.8 32/38 EGSM 150ohm output GSM850 150ohm output FAR-G5KC-942M50-Y4YW FAR-G5QC-942M50-N2CD FAR-G5KT-942M50-Y4RZ FAR-G5QD-942M50-N2DB FAR-G6QC-1G9600-N2FA G6QJ1G960M2MB 1.8×1.4×0.5 1.5×1.1×0.5 1.8×1.4×0.5 1.5×1.1×0.5 1.5×1.1×0.5 1.5×1.1×0.5 1.8/1.4 1.7/1.4 2.2/1.9 2.5/2.0 1.9/1.7 1.9/1.9 31/54 29/51 25/52 25/55 17/13 19/19 EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output DCS 150ohm output GSM1900 150ohm output Rx Dual Unbal FAR-G6KT-1G9600-Y4RU 1.8×1.4×0.5 1.8/2.0 18/13 DCS 150ohm output GSM1900 150ohm output G6QD1G960N2DY 1.5×1.1×0.5 1.8/1.9 18/14 1 IN 4 OUT 150ohm output GSM1900+DCS Rx FAR-G6KC-1G9600-Y4YY G6QC1G960N2CH 1.8×1.4×0.5 1.5×1.1×0.5 1.9/1.8 1.6/1.6 14/16 13/15 GSM1900 150ohm output DCS 150ohm output GSM1900 150ohm output DCS 150ohm output GSM1900+DCS Rx (Common Input) FAR-G6KT-1G9600-Y4RY 1.8×1.4×0.5 1.9/1.8 13/18 GSM1900 150ohm output DCS 150ohm output FAR-G6KW-1G9600-Y4YC G6QE1G960N2EC G6QE1G960N2EE G6QF1G960N2GA 1.8×1.4×0.5 1.5×1.1×0.5 1.5×1.1×0.5 1.5×1.1×0.5 2.2/3.1 2.5/2.5 2.2/2.2 1.6/1.4 13/15 18/13 31/14 14/54 170ohm output for IMC GSM1900 150ohm output DCS 150ohm output GSM1900/DCS 150ohm output Low Loss GSM1900 150ohm output GSM850 150ohm output Attenuation(dB) Remarks − − − − − − − − − − Low loss, High Att. Low loss, High Att. 100ohm, Low loss 100ohm, High Att. − − 100ohm output 100ohm output System DCS Tx DCS Rx W-CDMA/LTE Band 3 Part number FAR-F6KA-1G7475-D4CY F6QA1G747M2QS FAR-F6KA-1G8425-D4CK FAR-F6KB-1G8425-B4GA F6QB1G842P2BM F6QB1G842P2BF F6KY1G842B4UM ●PCS/GSM1900/Band 2 System US-PCS Tx US-PCS Rx GSM1900/US-PCS Rx HIGH FREQUENCY PRODUCTS GSM1900 Rx Part number FAR-F6KA-1G8800-L4AF FAR-F6KB-1G8800-B4GS F6QA1G880M2AQ FAR-F6KA-1G9600-D4MT FAR-F6KB-1G9600-B4GP FAR-F6KY-1G9600-B4UU F6KY1G960B4NF F6QG1G960P2KT FAR-F6KA-1G9600-D4CR FAR-F6KB-1G9600-B4GB F6QB1G960P2BK 150ohm output 150ohm output ●GSM Dual System GSM850+EGSM Rx GSM850+EGSM Rx (Common Input) GSM850+EGSM Rx (Common Output) EGSM+GSM850 Rx EGSM+GSM850 Rx (Common Input) DCS+GSM1900 Rx DCS+GSM1900 Rx (Common Input) DCS+GSM1900 Rx (Common Input) GSM1900+DCS Rx (Common Output) GSM1900+850 Rx Part number ●GPS System GPS GPS/GNSS GPS+GLONASS+Galileo +Compass Part number FAR-F6KA-1G5754-L4AJ F6QA1G575H2JF FAR-F6KB-1G5754-B4GE FAR-F6KB-1G5754-B4GU FAR-F6KA-1G5859-D4MS F6QA1G585M2AT FAR-F6KB-1G5859-B4HR F6QB1G585P2BQ F6KA1G581D4JR F6QA1G581M2QZ Package Size (mm) 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.1×0.9×0.5 Insertion Loss (dB) 0.9 0.96 1.1 1.2 1.0/1.2 1.1/1.4 1.1/1.4 1.5/1.7 1.6 1.1/1.4 ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 138 15 ■ PART NUMBERS ●W-CDMA System W-CDMA Band 1 Tx W-CDMA Band 1 Rx W-CDMA Band 1+2 Rx W-CDMA Band 2+1 Rx W-CDMA Band 4 Tx W-CDMA Band 5+8 Rx W-CDMA Band 8+5 Rx (Common Output) W-CDMA Band 7 Tx W-CDMA/LTE Band 7 Rx W-CDMA Band 9 Tx W-CDMA Band 9 Rx LTE Band 12 Tx LTE Band 12 Rx LTE Band 13 Rx LTE Band 17 Tx LTE Band 17 Rx LTE Band 18 Tx LTE Band 18+5 (BC0) Tx LTE Band 20 Tx LTE Band 20 Rx LTE Band 21 Rx LTE Band 25 Tx LTE Band 26 Rx LTE Band 28 Rx LTE Band 29 Rx TD LTE Bnad 38 Rx TD LTE Band 38+40 (Common output) TD LTE Band 40 Rx FAR-F6KA-1G9500-D4DG FAR-F6KB-1G9500-B4GJ F6QA1G950M2AA FAR-F6KA-2G1400-D4CG FAR-F6KB-2G1400-B4GC FAR-F6KA-2G1400-D4DW FAR-F6KY-2G1400-B4UY F6QG2G140P2KA G6QL2G140M2PA G6QH2G140N2LP FAR-F6KA-1G7400-D4DE G5QH942M5N2LN Package Size (mm) 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.5×1.1×0.5 1.5×1.1×0.5 1.4×1.0×0.5 1.5×1.1×0.5 Insertion Loss (dB) 1.6 2.1 1.8 1.9 1.7 1.9 1.8 1.7 1.9/3.0 3.2/2.3 1.5 1.6/20 Attenuation(dB) Remarks 38 34 38 39 39 48 64 55 48/41 53/54 44 56/50 Low loss, High Att. 100ohm output Low loss, High Att. 100ohm output High Att. 100ohm, High Att. 100ohm, High Att. 100ohm output G5QT942M5N2VA 1.5×1.1×0.5 2.3/2.0 48/48 F6KA2G535L4AM FAR-F6KY-2G6550-B4UN F6QG2G655P2KE FAR-F6KA-1G7675-D4CT FAR-F6KB-1G8625-B4GT F5KA707M5D4JW F5KY737M0B4NN FAR-F5KA-782M00-D4VP F5QA782M0M2AZ FAR-F5KY-751M00-B4UQ F5QA751M0M2QM FAR-F5KA-710M00-D4VQ F5QA710M0M2AY FAR-F5KY-740M00-B4UR F5QG740M0P2KH F5KA822M5D4VR F5KA832M0D4JS F5KA847M0D4ML F5KY806M0B4NE F5QA806M0M2QE F6KY1G503B4NS F6QA1G503M2QF F6QA1G882M2AS F5QG876M5P2KQ F5QA773M0M2QC F5QA788M0M2QB F5BA722M5M6UW F6KB2G595B4HS 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.1×0.9×0.5 1.1×0.9×0.5 1.1×0.9×0.5 1.1×0.9×0.5 1.1×0.9×0.5 1.1×0.9×0.5 1.4×1.0×0.5 1.6 2.8 2.5 1.8 2.1 1.6 1.4 1.5 1.5 1.6 1.9 1.2 1.3 1.4 1.4 1.6 1.5 1.7 2.5 2.7 1.4 2.0 1.8 2.2 2.1 2.0 1.6 2.6 30 54 52 31 40 23 57 55 56 50 50 32 33 60 65 40 19 52 45 41 47 52 23 59 52 52 38 − 2 (1.9G)100ohm out 1 (2G)100ohm out 100ohm output 100ohm. High Att. 100ohm. High Att. Unbal. 100ohm output Unbal. 100ohm output Unbal. 100ohm output Unbal. Unbal. 100ohm output 100ohm output Unbal. Unbal. 100ohm output Unbal. 100ohm output Low loss Unbal. Unbal. 100ohm output Block A Block B Unbal. 150ohm output G6QE2G595N2EJ 1.5×1.1×0.5 2.9/2.8 − Balanced 100ohm F6KB2G350B4HT F6KB2G350B4HTB 1.4×1.0×0.5 1.4×1.0×0.5 2.7 2.5 − − 150ohm output Balanced 100ohm Attenuation(dB) Remarks HIGH FREQUENCY PRODUCTS LTE Band 13 Tx Part number ●Other System Part number ISM900 (B.W.26MHz) TD-SCDMA/TD-LTE Band 34 TD-SCDMA/TD-LTE Band 39 FAR-F5QA-915M00-M2AK FAR-F6KA-2G0175-D4DR FAR-F6KA-1G9000-D4DS G6QJ2G017M2MD G6QJ2G017M2RD TD-SCDMA Band 34+39 TD-SCDMA Band 39+34 (Common input) TD-SCDMA Band 34+39 (Common input) Wireless LAN Package Size (mm) 1.1×0.9×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.5×1.1×0.5 1.5×1.1×0.5 Insertion Loss (dB) 1.8 1.8 1.6 1.3/1.4 1.6/2.0 − − − − − High Att 2 IN/2 OUT 1 IN/2 OUT G6QD2G017N2DU 1.5×1.1×0.5 1.7/2.0 − Balanced 100ohm G6QD2G017N2DC 1.5×1.1×0.5 2.2/1.8 − Balanced 200ohm FAR-F6KA-2G4418-D4CU FAR-F6KA-2G4418-A4VA FAR-F6KA-2G4500-A4VD F6KA2G436A4VE F6KA2G466A4VJ 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 1.4×1.0×0.5 2.6 3.0 1.9 2.5 2.8 − − − − − +10dBm +23dBm Low IL,+19dBm BW=72MHz,+24dBm BW=68MHz,+24dBm ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 15 139 SAW/FBAR DEVICES (FILTER / DUPLEXERS) ■PACKAGING ①Minimum Quantity Type Duplexer Single Filter Dual Filter Size(mm) 3.0×2.5 2.5×2.0 2.0×1.6 2.0×1.6 1.4×1.0 1.1×0.9 2.0×1.6 1.8×1.4 1.5×1.1 Z Z Z Z Z 3000 3000 3000 3000 3000 Z Z 3000 3000 Code & Quantity(Pieces) U U J 5000 J 5000 10000 10000 Y Y Y Y Y Y Y 15000 15000 15000 15000 15000 15000 15000 ②Tape material ●Taping dimensions Type Duplexer Single Filter Dual Filter Size(mm) 3.0×2.5 2.5×2.0 2.0×1.6 2.0×1.6 1.4×1.0 1.1×0.9 2.0×1.6 1.8×1.4 1.5×1.1 a 3.4±0.1 2.8±0.1 2.4±0.1 2.4±0.1 1.7±0.1 1.3±0.1 2.4±0.1 2.2±0.1 1.8±0.1 b 2.85±0.1 2.3±0.1 2.0±0.1 2.0±0.1 1.3±0.1 1.1±0.1 2.0 1.8 1.4 c 1.05±0.05 1.5+0.1/-0 1.05±0.05 1.05±0.05 0.5±0.05 0.5±0.05 1.05±0.05 0.5±0.05 0.5±0.05 d 1.55±0.05 1.5+0.1/-0 1.5+0.1/-0 1.5+0.1/-0 1.5+0.1/-0 1.55±0.05 1.5+0.1/-0 1.55±0.05 1.5+0.1/-0 e 1.0±0.1 1.0+0.1/-0.0 0.90-0.05 0.90-0.05 0.63±0.05 0.63±0.05 0.90-0.05 0.8±0.1 0.7±0.1 f 0.25±0.05 0.25±0.05 0.25±0.05 0.25±0.05 0.20±0.05 0.20±0.05 0.25±0.05 0.30±0.05 0.25±0.05 Unit:mm ●Material of Tape(Conductive) Tape : Polystyrene Top cover tape : Polyethylene terephthalate(PET)and Polyethylene ③Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E02R01 ④Reel size ●Material of Reel Material : Polystyrene+Carbon Characteristics : Conform to EIAJ-ET-7200A Color : Black Surface resistance(reference value) :109Ω/sq Max. Code Quantity A Z 3,000 pcs φ180.0 +0.0/-1.5 J 5,000 pcs φ180.0 +0.0/-1.5 U 10,000 pcs φ330.0 ±2.0 Y 15,000 pcs φ330.0 ±2.0 B φ66.0 ±0.5 φ66.0 ±0.5 φ100.0 ±1.0 φ100.0 ±1.0 C φ13.0 ±0.2 φ13.0 ±0.2 φ13.0 ±0.2 φ13.0 ±0.2 W1 9.0 +1.0/-0.0 9.0 +1.0/-0.0 9.4 ±1.0 9.4 ±1.0 W2 11.4 ±1.0 11.4 ±1.0 13.4 ±1.0 13.4 ±1.0 Unit:mm ⑤Reel label and Reel C-Label sticking and Winding method ●Surface ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E02R01 Filter ■RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bending Test. according to IEC60068-2-21(JISC60068-2-21) Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Temp. range -40 to +100℃. 500cycle. 7. Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks +85℃, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks +100℃, 1000hours. 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks -40℃, 1000hours. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 10. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, Reflow;Peak temperature 245℃ 11. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, Reflow;Peak temperature 235℃ 12. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. ◆Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 Duplexer ■RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bend width 4mm, hold for 5±1 sec. according to IEC60068-2-21(JISC60068-2-21) Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Temp. range -40 to +100℃. 500cycle. 7. Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks +85℃, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks +100℃, 1000hours. 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks -40℃, 1000hours. ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 10. High Temperature Bias Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks +50℃, +29dBm, 50000hours. 11. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, Reflow;Peak temperature 245℃ 12. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, Reflow;Peak temperature 235℃ 13. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. ◆Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks ▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01
J5NA782M0P1H6-Z 价格&库存

很抱歉,暂时无法提供与“J5NA782M0P1H6-Z”相匹配的价格&库存,您可以联系我们找货

免费人工找货