MLD2016S1R5MTD25

I N D U C T O R S Inductors for power circuits Multilayer ferrite MLD series (for automotive) RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free AEC-Q200 MLD2016 type FEATURES Being achieving high reliability by material application that was suitable for Automotive application and products design. In complete monolithic structure with multilayer cluster, be reducing flux leakage Operating temperature range: –40 to +125°C (including self-temperature rise) APPLICATION ADAS, car multimedia (telematics), various ECUs, various modules Application guides: Car Infotainment PART NUMBER CONSTRUCTION MLD 2016 S 1R0 M T D25 Series name L x W dimensions 2.0×1.6 mm Characteristic type Inductance (µH) Height (mm max.) Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Thickness L Measuring frequency DC resistance Rated current Part No. T Itemp (mm)max. (µH) Tolerance (MHz) () (mA)max. 1.0 1.0 ±20% 2 0.12±30% 1100 MLD2016S1R0MTD25 1.0 1.5 ±20% 2 0.15±30% 1000 MLD2016S1R5MTD25 1.0 2.2 ±20% 2 0.17±30% 900 MLD2016S2R2MTD25 1.0 3.3 ±20% 2 0.23±30% 800 MLD2016S3R3MTD25 1.0 4.7 ±20% 2 0.25±30% 750 MLD2016S4R7MTD25 *Rated current(Itemp): current assumed when temperature has risen to 40°C max. Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product. Measurement equipment Measurement item Product No. L 4294A DC resistance Digital Milliohm Meter Rated current Isat 4285A+42841A+42842C ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Keysight Technologies ○ Rated current vs. temperature characteristics (derating) 1200 Rated current (mA) 1000 800 1R0M 1R5M 2R2M 3R3M 4R7M 600 400 200 0 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20181105 inductor_automotive_power_mld2016_en.fm I N D U C T O R S MLD2016 type L FREQUENCY CHARACTERISTICS 6.0 Inductance(µH) 5.0 4R7M 4.0 3R3M 3.0 2R2M 2.0 1R5M 1R0M 1.0 0.0 0.1 1 10 100 Frequency(MHz) Measurement equipment Product No. Manufacturer 4294A Keysight Technologies ＊ Equivalent measurement equipment may be used. INDUCTANCE VS. DC BIAS CHARACTERISTICS 6.0 5.0 Inductance(µH) 4.0 4R7M 3.0 3R3M 2.0 2R2M 1R5M 1R0M 1.0 0.0 0.0 0.5 1.0 DC Bias(A) 1.5 2.0 Measurement equipment Product No. Manufacturer 4285A+42841A+42842C Keysight Technologies ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20181105 inductor_automotive_power_mld2016_en.fm I N D U C T O R S MLD2016 type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 2.00±0.20 1.00max. ø60min. 1.60±0.20 1.0 2.0±0.5 8.4 +2.0 –0.0 ø13±0.2 14.4max. ø21±0.8 ø180±2.0 0.50±0.30 Dimensions in mm Dimensions in mm Sprocket hole 1.5 +0.1 –0.0 2.0±0.05 4.0±0.1 B 8.0±0.3 1.60 0.25±0.05 0.80 1.00 K 0.80 3.5±0.05 TAPE DIMENSIONS RECOMMENDED LAND PATTERN 1.75±0.1 0.50±0.30 4.0±0.1 A Cavity Dimensions in mm Dimensions in mm Type MLD2016 A 2.25±0.10 B 1.85±0.10 K 1.10±0.10 RECOMMENDED REFLOW PROFILE 160min. Preheating Soldering Taping 200min. Natural cooling Peak 250 to 260°C Temperature 230°C PACKAGE QUANTITY 10s max. 60 to 120s 30 to 60s Time Dimensions in mm 230°C 180°C 150°C 300min. Drawing direction Package quantity 3,000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage Individual temperature range temperature range weight –40 to +125 °C –40 to +125°C 12 mg  Operating temperature range includes self-temperature rise.  The storage temperature range is for after the assembly. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20181105 inductor_automotive_power_mld2016_en.fm I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20181105 inductor_automotive_power_mld2016_en.fm