Te m p e r a t u r e P r o t e c t i o n D e v i c e s
August 2022
Temperature protection devices
Chip NTC thermistor
Commercial grade
NTCG series
NTCG 0402
NTCG 0603
NTCG 1005
NTCG 1608
NTCG 2012
JIS 0402 [EIA01005]
JIS 0603 [EIA 0201]
JIS 1005 [EIA 0402]
JIS 1608 [EIA 0603]
JIS 2012 [EIA 0805]
(2/19)
Temperature Protection Devices
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
Incorrect usage may lead to destroyed NTC thermistors and damages or malfunctions with the devices used.
Please use them within the ranges of the ratings and performance provided in the catalog and delivery specifications upon confirming
the environments where they are to be used and installed.
Do not use them outside the operating temperature range.
Do not use them with the ratings or maximum permissible power levels exceeded.
Do not quickly apply 5mW or more of load with the constant-voltage power supply in the NTC thermistors as this may lead to staying in
thermal runaway mode or the red-shorting of chips.
Please be cautious of the applied voltage in thermistors as instruments may malfunction with the lowering of resistance due to self
heating.
With instruments that consumers can touch the thermistors with their hands, please carefully warn them not to touch the thermistors.
Store them in locations where the temperature is 10°C to +40°C and the relative humidity is 75% or below, avoid environments where
there are sudden changes in temperatures, direct sunlight, corrosive gas, grit, or dust, and keep them packed in a manner where no
loading stress is applied in order to avoid deterioration and damage. (please use them within six months.)
When sealing thermistors, please do so upon first considering the type, quantity, hardening conditions, and adhesiveness of the sealing material and confirming its reliability.
Avoid powerful vibrations, impact (such as by dropping), pressure, etc. on thermistors that exceed the prescribed levels.
Do not use them for long periods of time in environments with a relative humidity of over 85%. (this excludes cases where countermeasures have been taken.)
Do not use them in the following environments. (this excludes cases where countermeasures have been taken.)
・Corrosive gases (Cl2, NH3, SOx, NOx, etc.)
・Environments with highly conductive substances (electrolytes, water, saltwater, etc.)
・Environments with acid, alkali, or organic solvents
・Dusty areas
Please observe the following precautions when attaching them to substrates as failure to do so may result in destruction or malfunction.
・Do not let the substrates get warped or twisted at any time during the soldering.
・The landing size must be even on both the left and right sides.
・Do not use items that have been dropped or detached.
・Do not allow the adherence of more solder than needed.
Reflow mounting is recommended with NTC thermistors, and not flow (dip) mounting.
Attaching or making corrections with a soldering iron is not recommended as it can lead to troubles such as significant distorting due to
thermal shock or cracking. If a soldering iron must be used, it should be 20W or below with the temperature of the tip at 350°C or
below, and at a maximum of 5 seconds of soldering time. Also, do not let the tip of the soldering iron come in direct contact with the
chips.
Please use a substance such as resin that does not generate hydrogen (H2) when forming insulation film over chips.
Please contact our sales offices when considering the use of the products listed on this catalog for applications, whose performance
and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage
to society, person or property ('specific uses' such as automobiles, airplanes,medical instruments, nuclear devices, etc.) as well as
when considering the use for applications that exceed the range and conditions of this catalog.
Please note that we are not responsible for any damages or losses incurred resulting from the use of these products that exceeds the
range and conditions of this catalog or specific uses.
Please take appropriate measures such as acquiring protective circuits and devices that meet the uses, applications, and conditions of
the instruments and keeping backup circuits.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(3/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
Overview of the NTCG series
CHARACTERISTICS OF NTC THERMISTORS
FEATURES OF NTCG SERIES
NTC(Negative Temperature Coefficient) thermistors are
manufactured from sintered metal oxides. Each thermistor
consists of a combination of two to four of the following
materials:Mn, Ni, Co, and Cu. NTC thermistors are semiconductor
resistors that exhibit decreasing resistancecharacteristics with
increasing temperature. TDK thermistors have low thermal time
constants which result in extremely high rates of resistance
change to accurately track the temperature.
Fig.1 R-T Curve : 10kohm@25°C
0402 to 2012mm wide lineup
125°C
UL1434 acquisition (File No.E250289)
Fig.2 Internal structure of the multilayer chip thermistors
1000
①
Resistance (kΩ)
100
10
②
1
⑤
0.1
–40
0
50
100
Temperature (°C)
150
④
③
200
No.
(1)
(2)
(3)
(4)
(5)
Name
Semiconductor ceramics
Internal electrode(Pd)
Ag
Terminal electrode Ni
Sn
RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/info/en/environment/rohs/index.html
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(4/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
Overview of the NTCG series
PART NUMBER CONSTRUCTION
NTC
G
○○
3E
H
101
□
T
□□□
Series
name
Structural
classification
shapes and
dimensions
Code
(mm)
B
constant
B
constant
tolerance
(%)
Nominal
resistance
Nominal
resistance
tolerance
(%)
Packaging
style
TDK internal code
30
D
±0.5
T
100
F
±1
H
±3
J
±5
NTC
thermistor
G
B
Multilayer internal
electroded
chip type
NTC thermistor
(Pb free type)
()
04
0402
X
±0.7
300
06
0603
F
±1
101
10
1005
H
±3
102
16
1608
J
±5
103
20
2012
1000
(1k)
10000
(10k)
Taping
Commercial grade (1005mm or more)
B constant: 25/85°C
Commercial grade (1005mm or more)
1X B constant: 25/50°C
Commercial grade (0603mm or less)
B B constant: 25/85°C
Commercial grade (0603mm or less)
BX B constant: 25/50°C
1
constant
B constant (K)
2000 to 2050
2A
2051 to 2100
2B
2101 to 2150
2C
2201 to 2250
2E
2251 to 2300
2F
2401 to 2450
2J
2451 to 2500
2K
2501 to 2550
2L
2601 to 2650
2N
2701 to 2750
2Q
2801 to 2850
2S
3A
3B
3C
3E
3F
3J
3K
3L
3N
3Q
3S
3000 to 3050
3051 to 3100
3101 to 3150
3201 to 3250
3251 to 3300
3401 to 3450
3451 to 3500
3501 to 3550
3601 to 3650
3701 to 3750
3801 to 3850
4A
4B
4C
4E
4F
4J
4K
4L
4N
4Q
4S
4000 to 4050
4051 to 4100
4101 to 4150
4201 to 4250
4251 to 4300
4401 to 4450
4451 to 4500
4501 to 4550
4601 to 4650
4701 to 4750
4801 to 4850
The B constant indicates the magnitude of a change in a zero-load resistance value to a temperature, and is obtained based on arbitrary
two temperatures in resistance-to-temperature characteristics.
B constant calculation formula
B=
InR1–InR2
(1/T1)–(1/T2)
L
0.40±0.02
0.60±0.03
1.00±0.05
1.60±0.10
2.00±0.20
W
0.20±0.02
0.30±0.03
0.50±0.05
0.80±0.10
1.25±0.20
T
0.20±0.02
0.30±0.03
0.50±0.05
0.80±0.10
0.70±0.20
L
Dimemsions in mm
B
0.07min
0.1min
0.1min
0.2min
0.2min
W
Shape symbol (JIS)
0402
0603
1005
1608
2012
B: B constant (K)
T1: Arbitrary temperature (K)
T2: Arbitrary temperature different from T1 (K)
R1:Zero-load resistance value at temperature T1()
R2: Zero-load resistance value at temperature T2()
Each temperature is measured in absolute temperature. 0°C=273.15K
T
B
RATINGS
Size
Maximum rated power (25°C) Asteris1
Dissipation factors (25°C) 2
mm
mW
mW/°C | mW/K
0402
60
0.6
0603
100
1
1005
100
1
1608
100
1
2012
200
2
1 Maximum rated power: Maximum power: at rated temperature (25°C), maximum power that can be applied continuously
2 Dissipation factors: powered that it is equivalent that be increased in self-heating by load power thermistor at 1°C temperature
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(5/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
NTCG series 0402 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.2±0.02
0.18 to 0.20
0.4±0.02
0.15 to 0.20
0.2 Nom.
0.15 to 0.20
0.2±0.02
0.07min.
Electrode material
Internal:Pd
External:Ag/Ni/Sn
Dimensions in mm
JIS 0402 [EIA 1005] (Operating temperature range : –40 to 125°C)
Part No.
Resistance
value
Resistance
tolerance
[25°C]
()
NTCG043JF103FTBX
NTCG044EF104FTBCX
NTCG044EF474FTBCX
10,000
100,000
470,000
±1%
±1%
±1%
B constant
B constant
B constant
B constant
[25/50°C]
(K)
[25/75°C]
(K)
[25/85°C]
(K)
[25/100°C]
(K)
3380
4250
4250
3413
4283
4293
3426
4293
4308
3445
4306
4306
B constant
tolerance
Permissible
operating
current
[25°C]
(mA)
±1%
±1%
±1%
0.24
0.07
0.03
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(6/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
NTCG series 0603 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.3±0.03
0.25 to 0.35
0.6±0.03
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3
0.3±0.03
0.15±0.05
Electrode material
Internal:Pd
External:Ag/Ni/Sn
Dimensions in mm
JIS 0603 [EIA 0201] (Operating temperature range : –40 to 125°C)
Part No.
Resistance Resistance B constant B constant B constant B constant B constant Permissible
value
tolerance
tolerance operating
current
[25/50°C]
[25/75°C]
[25/85°C]
[25/100°C]
[25°C]
[25°C]
(K)
(K)
(K)
(K)
()
(mA)
Operating
temperature
range
NTCG063EH400HTB
NTCG063JF103FTB
NTCG063JF103HTB
NTCG063JF103JTB
NTCG063JH103HTB
NTCG063JH103JTB
NTCG063UH103HTBX
NTCG064BH103HTB
NTCG064BH103JTB
NTCG063JF223HTBX
NTCG064BF473FTBX
NTCG064BF473HTBX
NTCG064BF473JTBX
NTCG064EF683FTBX
NTCG064EF683JTBX
NTCG064BF104FTBX
NTCG064EF104FTBX
NTCG064EF104HTBX
NTCG064EF104JTBX
40
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
22,000
47,000
47,000
47,000
68,000
68,000
100,000
100,000
100,000
100,000
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
+/–3%
+/–1%
+/–3%
+/–5%
+/–3%
+/–5%
+/–3%
+/–3%
+/–5%
+/–3%
+/–1%
+/–3%
+/–5%
+/–1%
+/–5%
+/–1%
+/–1%
+/–3%
+/–5%
3244
3380
3380
3380
3380
3380
3900
4067
4067
3380
4050
4050
4050
4250
4250
4050
4250
4250
4250
3249
3422
3422
3422
3422
3422
3934
4092
4092
3422
4098
4098
4098
4293
4293
4134
4293
4293
4293
3250
3435
3435
3435
3435
3435
3950
4100
4100
3435
4114
4114
4114
4308
4308
4114
4308
4308
4308
3251
3453
3453
3453
3453
3453
3971
4110
4110
3453
4137
4137
4137
4327
4327
4137
4327
4327
4327
+/–3%
+/–1%
+/–1%
+/–1%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–1%
+/–1%
+/–1%
+/–1%
+/–1%
+/–1%
+/–1%
+/–1%
+/–1%
+/–1%
5.00
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.21
0.14
0.14
0.14
0.12
0.12
0.10
0.10
0.10
0.10
RT table
(°C)
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(7/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
NTCG series 1005 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.5±0.05
0.4 to 0.6
1±0.05
0.35 to 0.45 0.3 to 0.5 0.35 to 0.45
0.5±0.05
0.1 min.
Electrode material
Internal:Pd
External:Ag/Ni/Sn
Dimensions in mm
JIS 1005 [EIA 0402] (22 to 15k : Operating temperature range : –40 to 125°C)
Part No.
Resistance Resistance B constant B constant B constant B constant B constant Permissible
value
tolerance
tolerance operating
current
[25/50°C]
[25/75°C]
[25/85°C]
[25/100°C]
[25°C]
[25°C]
(K)
(K)
(K)
(K)
()
(mA)
Operating
temperature
range
NTCG103EH220JT1
NTCG103EH300JT1
NTCG103EH400HT1
NTCG103EH400JT1
NTCG103EH470JT1
NTCG103EH101HT1
NTCG103EH101JT1
NTCG103NH471JT1
NTCG103NH681JT1
NTCG104BH102HT1
NTCG104BH102JT1
NTCG104BH152JT1
NTCG104BH222JT1
NTCG104BH332JT1
NTCG103LH472JT1
NTCG104BH472HT1
NTCG104BH472JT1
NTCG104BH682JT1
NTCG103JF103FT1
NTCG103JF103GT1
NTCG103JF103HT1
NTCG103JF103JT1
NTCG103JH103HT1
NTCG103JH103JT1
NTCG103JX103DT1
NTCG103UH103HT1
NTCG103UH103JT1
NTCG104BH103HT1
NTCG104BH103JT1
NTCG104BH153HT1
NTCG104BH153JT1
22
30
40
40
47
100
100
470
680
1,000
1,000
1,500
2,200
3,300
4,700
4,700
4,700
6,800
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
15,000
15,000
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
+/–5%
+/–5%
+/–3%
+/–5%
+/–5%
+/–3%
+/–5%
+/–5%
+/–5%
+/–3%
+/–5%
+/–5%
+/–5%
+/–5%
+/–5%
+/–3%
+/–5%
+/–5%
+/–1%
+/–2%
+/–3%
+/–5%
+/–3%
+/–5%
+/–0.5%
+/–3%
+/–5%
+/–3%
+/–5%
+/–3%
+/–5%
3244
3244
3244
3244
3244
3244
3244
3642
3642
4096
4096
4096
4096
4067
3500
4067
4067
4067
3380
3380
3380
3380
3380
3380
3380
3900
3900
4067
4067
4067
4067
3249
3249
3249
3249
3249
3249
3249
3649
3649
4100
4100
4100
4100
4092
3532
4092
4092
4092
3422
3422
3422
3422
3422
3422
3422
3934
3934
4092
4092
4092
4092
3250
3250
3250
3250
3250
3250
3250
3650
3650
4100
4100
4100
4100
4100
3545
4100
4100
4100
3435
3435
3435
3435
3435
3435
3435
3950
3950
4100
4100
4100
4100
3251
3251
3251
3251
3251
3251
3251
3650
3650
4100
4100
4100
4100
4110
3564
4110
4110
4110
3453
3453
3453
3453
3453
3453
3453
3971
3971
4110
4110
4110
4110
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–1%
+/–1%
+/–1%
+/–1%
+/–3%
+/–3%
+/–0.7%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
6.70
5.70
5.00
5.00
4.61
3.10
3.10
1.40
1.20
1.00
1.00
0.81
0.67
0.55
0.46
0.46
0.46
0.38
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.31
0.25
0.25
RT table
(°C)
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(8/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
NTCG series 1005 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.5±0.05
0.4 to 0.6
1±0.05
0.35 to 0.45 0.3 to 0.5 0.35 to 0.45
0.5±0.05
0.1 min.
Electrode material
Internal:Pd
External:Ag/Ni/Sn
Dimensions in mm
JIS 1005 [EIA 0402] (22K to 1,000k : Operating temperature range : –40 to 125°C)
Part No.
Resistance Resistance B constant B constant B constant B constant B constant Permissible
value
tolerance
tolerance operating
current
[25/50°C]
[25/75°C]
[25/85°C]
[25/100°C]
[25°C]
[25°C]
(K)
(K)
(K)
(K)
()
(mA)
Operating
temperature
range
NTCG104LH223HT1
NTCG104LH223JT1
NTCG104LH333JT1
NTCG104BF473FT1X
NTCG104BF473HT1X
NTCG104BF473JT1X
NTCG104LH473HT1
NTCG104LH473JT1
NTCG104BF683FT1X
NTCG104BF683HT1X
NTCG104BF683JT1X
NTCG104LH683HT1
NTCG104LH683JT1
NTCG104ED104DT1X
NTCG104EF104FT1X
NTCG104EF104HT1X
NTCG104EH104HT1X
NTCG104KF104FT1
NTCG104KF104HT1
NTCG104LH104HT1
NTCG104LH104JT1
NTCG104LH154JT1
NTCG104QH224HT1
NTCG104QH224JT1
NTCG104QH334HT1
NTCG104QH334JT1
NTCG104QH474HT1
NTCG104QH474JT1
NTCG104QH105HT1
NTCG104QH105JT1
22,000
22,000
33,000
47,000
47,000
47,000
47,000
47,000
68,000
68,000
68,000
68,000
68,000
100,000
100,000
100,000
100,000
100,000
100,000
100,000
100,000
150,000
220,000
220,000
330,000
330,000
470,000
470,000
1,000,000
1,000,000
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
+/–3%
+/–5%
+/–5%
+/–1%
+/–3%
+/–5%
+/–3%
+/–5%
+/–1%
+/–3%
+/–5%
+/–3%
+/–5%
+/–0.5%
+/–1%
+/–3%
+/–3%
+/–1%
+/–3%
+/–3%
+/–5%
+/–5%
+/–3%
+/–5%
+/–3%
+/–5%
+/–3%
+/–5%
+/–3%
+/–5%
4485
4485
4485
4050
4050
4050
4485
4485
4085
4085
4085
4485
4485
4250
4250
4250
4250
4419
4419
4485
4485
4485
4661
4661
4661
4661
4661
4661
4661
4661
4533
4533
4533
4098
4098
4098
4533
4533
4134
4134
4134
4533
4533
4293
4293
4293
4293
4468
4468
4533
4533
4533
4728
4728
4728
4728
4728
4728
4728
4728
4550
4550
4550
4114
4114
4114
4550
4550
4150
4150
4150
4550
4550
4308
4308
4308
4308
4485
4485
4550
4550
4550
4750
4750
4750
4750
4750
4750
4750
4750
4573
4573
4573
4137
4137
4137
4573
4573
4172
4172
4172
4573
4573
4327
4327
4327
4327
4508
4508
4573
4573
4573
4780
4780
4780
4780
4780
4780
4780
4780
+/–3%
+/–3%
+/–3%
+/–1%
+/–1%
+/–1%
+/–3%
+/–3%
+/–1%
+/–1%
+/–1%
+/–3%
+/–3%
+/–0.5%
+/–1%
+/–1%
+/–3%
+/–1%
+/–1%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
0.21
0.21
0.17
0.14
0.14
0.14
0.14
0.14
0.12
0.12
0.12
0.12
0.12
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.08
0.06
0.06
0.05
0.05
0.04
0.04
0.03
0.03
RT table
(°C)
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(9/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
NTCG series 1608 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.8±0.1
0.6 to 0.8
1.6±0.1
0.6 to 0.8
0.6 to 0.8
0.6 to 0.8
0.8±0.1
0.2 min.
Electrode material
Internal:Pd
External:Ag/Ni/Sn
Dimensions in mm
JIS 1608 [EIA 0603] (30 to 10k : Operating temperature range : –40 to 125°C)
Part No.
NTCG163EH300JT1
NTCG163EH400HT1
NTCG163EH400JT1
NTCG163EH101HT1
NTCG163EH101JT1
NTCG163EH151JT1
NTCG163NH221JT1
NTCG163NH331JT1
NTCG163NH471JT1
NTCG164BH102HT1
NTCG164BH102JT1
NTCG164BH222JT1
NTCG164BH302JT1
NTCG164BH332HT1
NTCG164BH332JT1
NTCG164BH472HT1
NTCG164BH472JT1
NTCG164BH682JT1
NTCG163JF103FT1
NTCG163JF103HT1
NTCG163JH103HT1
NTCG163JH103JT1
NTCG164BF103HT1
NTCG164BH103HT1
NTCG164BH103JT1
Resistance Resistance B constant B constant B constant B constant B constant Permissible
value
tolerance
tolerance operating
current
[25/50°C]
[25/75°C]
[25/85°C]
[25/100°C]
[25°C]
[25°C]
(K)
(K)
(K)
(K)
()
(mA)
30
40
40
100
100
150
220
330
470
1,000
1,000
2,200
3,000
3,300
3,300
4,700
4,700
6,800
10,000
10,000
10,000
10,000
10,000
10,000
10,000
+/–5%
+/–3%
+/–5%
+/–3%
+/–5%
+/–5%
+/–5%
+/–5%
+/–5%
+/–3%
+/–5%
+/–5%
+/–5%
+/–3%
+/–5%
+/–3%
+/–5%
+/–5%
+/–1%
+/–3%
+/–3%
+/–5%
+/–3%
+/–3%
+/–5%
3244
3244
3244
3244
3244
3244
3642
3642
3642
4096
4096
4096
4067
4067
4067
4067
4067
4067
3380
3380
3380
3380
4037
4067
4067
3249
3249
3249
3249
3249
3249
3649
3649
3649
4100
4100
4100
4100
4092
4092
4092
4092
4092
3422
3422
3422
3422
4092
4092
4092
3250
3250
3250
3250
3250
3250
3650
3650
3650
4100
4100
4100
4100
4100
4100
4100
4100
4100
3435
3435
3435
3435
4070
4100
4100
3251
3251
3251
3251
3251
3251
3650
3650
3650
4100
4100
4100
4110
4110
4110
4110
4110
4110
3453
3453
3453
3453
4080
4110
4110
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–1%
+/–1%
+/–3%
+/–3%
+/–1%
+/–3%
+/–3%
5.70
5.00
5.00
3.10
3.10
2.50
2.10
1.70
1.40
1.00
1.00
0.67
0.57
0.55
0.55
0.46
0.46
0.38
0.31
0.31
0.31
0.31
0.31
0.31
0.31
Operating
temperature
range
RT table
(°C)
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(10/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
NTCG series 1608 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.8±0.1
0.6 to 0.8
1.6±0.1
0.6 to 0.8
0.6 to 0.8
0.6 to 0.8
0.8±0.1
0.2 min.
Electrode material
Internal:Pd
External:Ag/Ni/Sn
Dimensions in mm
JIS 1608 [EIA 0603] (15k to 1,000k : Operating temperature range : –40 to 125°C)
Part No.
Resistance Resistance B constant B constant B constant B constant B constant Permissible
value
tolerance
tolerance operating
current
[25/50°C]
[25/75°C]
[25/85°C]
[25/100°C]
[25°C]
[25°C]
(K)
(K)
(K)
(K)
()
(mA)
Operating
temperature
range
NTCG164BH153JT1
NTCG164LH223HT1
NTCG164LH223JT1
NTCG164LH333JT1
NTCG164LH473HT1
NTCG164LH473JT1
NTCG164LH683HT1
NTCG164LH683JT1
NTCG164KF104FT1
NTCG164LH104HT1
NTCG164LH104JT1
NTCG164LH154HT1
NTCG164LH154JT1
NTCG164QH224HT1
NTCG164QH224JT1
NTCG164QH334JT1
NTCG164QH474HT1
NTCG164QH474JT1
NTCG164QH105HT1
NTCG164QH105JT1
15,000
22,000
22,000
33,000
47,000
47,000
68,000
68,000
100,000
100,000
100,000
150,000
150,000
220,000
220,000
330,000
470,000
470,000
1,000,000
1,000,000
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
–40 to 125
+/–5%
+/–3%
+/–5%
+/–5%
+/–3%
+/–5%
+/–3%
+/–5%
+/–1%
+/–3%
+/–5%
+/–3%
+/–5%
+/–3%
+/–5%
+/–5%
+/–3%
+/–5%
+/–3%
+/–5%
4067
4485
4485
4485
4485
4485
4485
4485
4419
4485
4485
4485
4485
4661
4661
4661
4661
4661
4661
4661
4092
4533
4533
4533
4533
4533
4533
4533
4468
4533
4533
4533
4533
4728
4728
4728
4728
4728
4728
4728
4100
4550
4550
4550
4550
4550
4550
4550
4485
4550
4550
4550
4550
4750
4750
4750
4750
4750
4750
4750
4110
4573
4573
4573
4573
4573
4573
4573
4508
4573
4573
4573
4573
4780
4780
4780
4780
4780
4780
4780
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–1%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
+/–3%
0.25
0.21
0.21
0.17
0.14
0.14
0.12
0.12
0.10
0.10
0.10
0.08
0.08
0.06
0.06
0.05
0.04
0.04
0.03
0.03
RT table
(°C)
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
csv
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(11/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
NTCG series 2012 type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
1.25±0.2
0.9 to 1.2
2±0.2
0.7 to 0.9
0.9 to 1.2
0.7 to 0.9
0.7±0.2
0.2 min.
Electrode material
Internal:Pd
External:Ag/Ni/Sn
Dimensions in mm
JIS 2012 [EIA 0805] (Operating temperature range : –40 to 125°C)
Part No.
Resistance Resistance B constant B constant B constant B constant B constant Permissible
value
tolerance
tolerance operating
current
[25/50°C]
[25/75°C]
[25/85°C]
[25/100°C]
[25°C]
[25°C]
(K)
(K)
(K)
(K)
()
(mA)
Operating
temperature
range
NTCG203NH103JT1
NTCG204AH473JT1
NTCG204CH104JT1
10,000
47,000
100,000
–40 to 125
–40 to 125
–40 to 125
+/–5%
+/–5%
+/–5%
3590
3931
4085
3635
3982
4134
3650
4000
4150
3670
4023
4172
+/–3%
+/–3%
+/–3%
0.44
0.20
0.14
RT table
(°C)
csv
csv
csv
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(12/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
NTCG series RT table
R-T TABLE ACQUISITION PROCEDURE
1. Access the top page of the TDK chip NTC thermistor (protective device)
https://product.tdk.com/info/en/products/protection/temperature/chip-ntc-thermistor/index.html
2. Click [Search by Part No.]
https://product.tdk.com/en/search/protection/temperature/chip-ntc-thermistor/part_no/
3. Enter the product name you want in the RT table in the box and click the Search button.
( Example: NTCG103JF103FT1 )
Wildcard and Multiple Part number.
NTCG103JF103FT1
Question mark (?) and asterisk (*) can be used as wildcard characters.
Search
The question mark (?) matches any single character, and the asterisk (*)
matches any sequence of characters.
Enter only one part number per line. Up to 50 part numbers can be
searched simultaneously.
Enable the real time search
A part number search is normally performed using a prefix search. If you
wish to use a suffix search, enter an exclamation mark (!) at the end of
the Part No.
4. Click the displayed product name.
( Example: NTCG103JF103FT1 )
Catalog /
Check Data
Images
Sheet
Part No.
NTCG103JF103FT1
New
NTCG103JF103FT1S
Distributor
Inventory
Brand
Buy Now
TDK
Buy Now
TDK
Apps.
Feature
125°C
UL
150°C
AEC-Q200
5. Individual pages are displayed and click the RT table in the "Document" on the right side bar.
Documents
Catalog
RoHS Certificate
SVHC/REACH Certificate
Selection Guide
RT Sheet
6. You can download the csv file in the 1°C step of the RT table for the product.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(13/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
Attention in the board design
BOARD DESIGN
When attached to NTC substrate thermistor, amount of silver used
(fillet size) has direct impact on NTC thermistor after mounting.
Thus, sufficient consideration is necessary.
Set of land dimensions
(1) As the stress rises in the NTC thermistor owing to the increase
in silver, breakage and cracks will occur. Cause including crack, as
caution on board land design, configure the shape and dimensions
so that the amount of silver is appropriate.
If you installed 2 or more parts in the Common Land, separated by
a solder resist and special land of each component.
Dimensions shape
(2) When peak levels panning-at soldering is excessive, by solder
contraction stress, mechanical-thermal stress causes a Yasuku
chip crack.
In addition, when the peak level is underestimated, terminal
electrode fixed strength is insufficient. This causes chip dropouts
and may affect circuit reliability.
Representative example of the panning of peak levels is shown in
the following.
Recommended silver dose
Solder stress is increased,
and it is easy for a crack to
form.
Solder volume
overload
Most large serving amount
Minimum prime amount
Decent solder
volume
C
B
Shape symbol
0402
0603
1005
1608
2012
A
Symbol
A
0.2 Nom.
0.25 to 0.35
0.30 to 0.50
0.60 to 0.80
0.90 to 1.20
Fixed strength is weak, and
there is connection a
problem and risk of loss.
Solder volume
deficit
Case and suggested protocol want to avoid
B
0.15 to 0.20
0.20 to 0.30
0.35 to 0.45
0.60 to 0.80
0.70 to 0.90
C
0.18 to 0.20
0.25 to 0.35
0.40 to 0.60
0.60 to 0.80
0.90 to 1.20
Example
Improvement example
(land division)
Cases to avoid
Leads
Chip
Leads
Solder
Solder resist
Lead wire and land
of part discrete
doubles up
PCB
Chassis
Solder
(ground solder)
Solder resist
Arrangements in
the vicinity
L1
L2
L2>L1
Land
Arrangements of
chip component's
companion
Excess solder
Solder resist
Land
Missing solder
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20220808 / tpd_commercial_ntc-thermistor_ntcg_en.fm
(14/19)
Temperature Protection Devices
Product compatible with RoHS directive
Compatible with lead-free solders
NTC thermistors
Commercial grade
Attention in the board design
Arrangements of components
(1) I was based on camber of substrate and suggested protocol of
NTC thermistor arrangement, as stress does not join to the utmost
is shown in following.
(2) In payment near by board, depending on mount position of
NTC PTC, as mechanical stress varies, please refer to the
following diagram.
Substrate for flexural stress Substrate for flexural stress
Adverse events
Good example
E
D
Perforation
Perforation or slit
C
Perforation or slit
Direction of
surface solder
B
A
Slit
Solder the mountain fold as a Solder the mountain fold as a
top.
bottom.
Perforation or slit
Perforation or slit
The order of A > B = C > D > E eases the stress.
Chip
arrangements
(direction)
Mounted vertically to the
perforation and slit.
L1
Distance from
perforation and
slit portion
Mounted horizontally to the
perforation and slit.
L2
(L1