10-00112

part number: 10-00112 description: Cable, 2000 mm, 50-00010 locking dc plug to stripped/tinned leads, 18 AWG, UL1185, shielded Specifications: plug description (1) plug overmold (2) cable description (3) cable outer diameter cable color cable gauge cable length twist tie (4) shrink tube (5) shrink tube (6) rated load Ø2.1 x 5.5 x 30 ± 0.5, black insulator, P/N 50-00010 30P, PVC, black UL1185, 0.16 x 41 strands, shield wire, 1F Ø3.4 ± 0.1 black AWG #18 2000 ± 50 black, 89 ± 3, non-toxic Ø4.0, 10 ± 2 Ø2.0, 30 ± 5 12 Vdc @ 5 A date: unit: page: rev: 05/28/09 mm 1 of 3 A Notes: Function test: no open, no reversed polarity, no short circuit, no INT Hi-POT test: 600 Vac, 0.5 mA, 1 sec. RoHS compliant Mechanical drawing: Initial Date tolerance X: ±0.5 mm .X: ±0.3 mm .XX: ±0.05 mm 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com part number: 10-00112 description: Cable, 2000 mm, 50-00010 locking dc plug to stripped/tinned leads, 18 AWG, UL1185, shielded date: unit: page: rev: 05/28/09 mm 2 of 3 A Cable specifications: conductors gauge material cord size insulation material color diameter jacket material color diameter electrical & physical properties spiral shield rated voltage rated temperature insulation resistance resistance @ 20 °C material unaged aging test tensile strength (kfg/mm2 min) elongation (%min) condition elongation (% unaged min) tensile strength (% unaged min) deformation (121± 1 °C x 1 hour) cold bend (-10 ± 1 °C x 1 hour) heat shock (121 ± 1 °C x 1 hour) flame test Cable cross section: 41/0.16 TC 300 V 80 °C 0.76 (15.6 °C) mΩ / m min. 21.8 mΩ/m max insulation 1.05 100 113°C/168 h 65 75 ≤50% OK OK VW-1 jacket 1.05 100 113°C/168 h 65 75 ≤50% OK OK VW-1 F0208C 60P (4026) UL 80°C black Ø3.4 ± 0.10 F0040C 50PB (4370) UL 80°C white Ø1.60 ± 0.05 18 AWG brass copper 41/0.16 TC conductor insulation shield PVC jacket 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com part number: 10-00112 description: Cable, 2000 mm, 50-00010 locking dc plug to stripped/tinned leads, 18 AWG, UL1185, shielded date: unit: page: rev: 05/28/09 mm 3 of 3 A Revision notes: Rev A Date May 28, 2009 Description initial release Specification Approval Spec sign-off verifies that you have reviewed the entire specification, tested a sample of the product, and confirm that it meets your requirements. This specification reflects the part as it will be ordered. Orders will not be processed until the specification pages have been initialed and the approval page has been signed. This specification is confidential and is not to be transmitted without prior approval from Tensility. Signature Name Title Date 29033 Avenue Sherman Ste 203 Valencia, CA 91355 ph 661.702.0035 fx 661.702.0038 www.tensility.com