54-00013

0.3 7.1 7.6 19.5 19.5 7.1 5.1 2 2 13.8 5.7 0.5x0.8 (x4) 13.1 14.9 10.8 3 2 1 2 3 4 1 11.6 Ø1.8 (x4) 0.7 0.25 2.8 3.5 0. 3 7.1 ±0.30 A A1 Date: 09/04/2015 07/30/2018 Description: Prepared: GL Initial release Corrected operating temp range Verified: RS 4 1.2 2 Notes: Digitally signed by GL Date: 2018.08.10 11:05:12 -07'00' Digitally signed by RS Date: 2018.08.10 17:18:55 -07'00' Dimensions are in millimeters. Tolerances: X: 0.5 mm X.X: 0.3 mm X.XX: 0.05 mm 5 PCB Layout 0.4 2 2 4.7 ±0.30 Revision: 2 5.4 4 RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB A Jack, PCB side-mount, 90°, nickel shell, board lock, black insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00013 Scale: 800 web 877.670.7118 tensility.com 2:1 Sheet 1 of 2 1 To see a custom version of this cable assembly, call Tensility at 541-323-3228 or email engineering@tensility.com USB A jack 90° PCB side-mount 5.7 Materials 1. Shell, steel, nickel plated 2. Pins, brass, 5 μ" gold and tin plating 3. Insulator, PBT, black USB A jack 90° PCB side-mount Electrical Rated voltage: 30 Vdc Rated current: 3 A Dielectric strength: 1 min @ 500 Vac Insulation resistance: 500 MΩ @ 500 Vdc Contact resistance: 50 mΩ or less Mechanical Insertion force: 3.5 kgf maximum Withdrawal force: 1.0 kgf minimum Durability: 1500 cycle minimum life; less than 100 mΩ contact resistance, minimum 100 MΩ insulation resistance Terminal strength: 0.3 kgf in any direction without damage or looseness 3 Soldering Solderability: 75% minimum coverage when terminals dipped 2 mm in 245 ±5 °C solder bath for 3 ±0.5 seconds Solder bath durability: no deformation when immersed in 255 ±5 °C up to surface of the board for 5 seconds or less Solder iron durability: no deformation when exposed to 350 ±10 °C for 3 ±0.5 seconds 1 2 19.5 7.1 2 2 5.7 1 2 3 4 Tin 5.4 0.5x0.8 (x4) Gold Environmental Cold test: -40 ±3 °C for 48 hours without deformation Heat test: 85 ±2 °C for 48 hours without deformation Humidity test: 40 ±2 °C and humidity between 90 and 98 % for 48 hours without deformation 2 11.6 Operating range -40 ~ 85 °C Ø1.8 (x4) PCB Layout Pin plating detail Revision: A A1 Date: 09/04/2015 07/30/2018 Description: Prepared: GL Initial release Verified: Corrected operating temp range RS Notes: Digitally signed by GL Date: 2018.08.10 11:05:35 -07'00' Digitally signed by RS Date: 2018.08.10 17:18:37 -07'00' Dimensions are in millimeters. Tolerances: 0.5 mm X: X.X: 0.3 mm X.XX: 0.05 mm 5 4 RoHS and REACH compliant Function test: no open, no short circuit, no intermittent tel fax Description: Connector, USB A Jack, PCB side-mount, 90°, nickel shell, board lock, black insulator, tray 3 2 1.541.323.3228 1.541.323.4202 Size: Part number: A 54-00013 Scale: 800 web 877.670.7118 tensility.com Sheet 2 of 2 2:1 1