25YD33-R

25Y Series www.vishay.com Vishay Cera-Mite AC Line Rated Ceramic Disc Capacitors Class X1, 400 VAC / Class Y2, 300 VAC / 250 VAC FEATURES • Complying with IEC 60384-14 • High reliability • Complete range of capacitance values • Radial leads • Singlelayer AC disc safety capacitors • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • X1 / Y2 according to IEC 60384-14 • Across-the-line QUICK REFERENCE DATA • Line by-pass DESCRIPTION VALUE Ceramic Class 2 Ceramic Dielectric Voltage (VAC) • Antenna coupling • EMI / RFI suppression and filtering Y5S 250 300 400 DESIGN Min. 1000 ΩF The capacitors consist of a ceramic disc of which both sides are silver-plated. Connection leads are made of tinned copper having a diameter of 0.032" (0.81 mm) or 0.025" (0.64 mm). The capacitors may be supplied with radial kinked or straight leads having a lead spacing of 0.375" (9.5 mm) or 0.250" (6.4 mm). The standard tolerance is ± 20 %. Coating is made of flame retardant epoxy resin in accordance with “UL 94 V-0.” TOLERANCE ON CAPACITANCE CAPACITANCE RANGE ± 20 % 1.0 nF to 8.0 nF DISSIPATION FACTOR RATED VOLTAGE 2.0 % max. at 1 kHz; 1 V IEC 60384-14: Min. Capacitance (pF) 1000 Max. Capacitance (pF) 8000 Mounting Radial INSULATION RESISTANCE CERAMIC DIELECTRIC • X1: 400 VAC, 50 Hz Y5S (Class 2) • Y2: 300 VAC, 50 Hz (LS ≥ 5.5 mm) • Y2: 250 VAC, 50 Hz (LS < 5.5 mm) CLIMATIC CATEGORY ACC. TO EN 60068-1 25/125/21 DIELECTRIC STRENGTH BETWEEN LEADS OPERATING TEMPERATURE RANGE Component test: 2500 VAC, 50 Hz, 2 s -30 °C to +125 °C As repeated test admissible only once with: 2250 VAC, 50 Hz, 2 s Random sampling test (destructive test): 2500 VAC, 50 Hz, 60 s DIELECTRIC STRENGTH OF BODY INSULATION 2300 VAC, 50 Hz, 60 s (destructive test) Revision: 22-Mar-2021 Document Number: 23105 1 For technical questions, contact: ceramitesupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 25Y Series www.vishay.com Vishay Cera-Mite DIMENSIONS in inches (millimeters) 1.250 min. (32) Dmax. LO LS Tinned Copper Leads Ø Tmax. 0.125 max. (3.2) ORDERING INFORMATION, CERAMIC X1 / Y2 CAPACITORS 25Y C (pF) TOL. (%) Dmax. DIAMETER INCH (mm) Tmax. THICKNESS INCH (mm) WIRE SIZE AWG INCH (mm) LS LEAD SPACE INCH (mm) ± 1 mm LO LEAD OFFSET INCH (mm) ± 0.5 mm ORDERING CODE Y5S TEMPERATURE STABLE (± 22 %, -30 °C TO +85 °C) 1000 0.330 (8.4) 0.170 (4.3) 0.075 (1.9) 25YD10-R 1500 0.400 (10.2) 0.175 (4.4) 0.079 (2.0) 25YD15-R 2000 0.430 (10.9) 0.075 (1.9) 25YD20-R 2200 0.460 (11.7) 0.079 (2.0) 25YD22-R 2700 0.490 (12.4) 0.075 (1.9) 25YD27-R 2800 0.530 (13.5) 0.175 (4.4) 0.079 (2.0) 25YD28-R 3000 0.530 (13.5) 0.175 (4.4) 0.079 (2.0) 25YD30-R 3200 0.560 (14.2) 0.087 (2.2) 25YD32-R 0.087 (2.2) 25YD33-R 0.087 (2.2) 25YD39-R 0.083 (2.1) 25YD40-R 0.087 (2.2) 25YD47-R 3300 ± 20 0.560 (14.2) 0.170 (4.3) 22 0.025 (0.64) 0.250 (6.4) 0.185 (4.7) 3900 0.620 (15.7) 4000 0.620 (15.7) 0.175 (4.4) 4700 0.680 (17.3) 0.185 (4.7) 20 0.032 (0.81) 0.375 (9.5) 5000 0.680 (17.3) 0.185 (4.7) 0.087 (2.2) 25YD50-R 5500 0.720 (18.3) 0.190 (4.7) 0.091 (2.3) 25YD55-R 5600 0.720 (18.3) 0.190 (4.7) 0.091 (2.3) 25YD56-R 6800 0.790 (20.1) 0.185 (4.7) 0.087 (2.2) 25YD68-R 8000 0.900 (22.9) 0.200 (5.1) 0.102 (2.6) 25YD80-R Notes • Alternate lead spacings of 7.5 mm and 10 mm are available bulk or tape and reel on request • Minimum lead clearance according to IEC 60384-14: 0.118" (3 mm) TAPE AND REEL OPTIONS Part number codes and specifications for tape and reel packaging are found in the general information document - find web-link below. Revision: 22-Mar-2021 Document Number: 23105 2 For technical questions, contact: ceramitesupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 25Y Series www.vishay.com Vishay Cera-Mite LEAKAGE CURRENT VS. VOLTAGE (Typical) INSERTION LOSS VS. FREQUENCY (Typical) 10 3 25YD28-R 25YD27-R 25YD22-R 2 25YD20-R 25YD15-R 1 25YD10-R Insertion Loss (dB) Leakage Current (mA) RMS 4 40 25YD20-R 50 100 0 500 1000 1500 AC Voltage (V) RMS 2000 2500 6 25YD10-R 25YD40-R 25YD39-R 25YD33-R 25YD32-R 25YD30-R 4 2 0 1 10 Frequency (MHz) 100 10 0 500 1000 1500 AC Voltage (V) RMS 2000 Insertion Loss (dB) Leakage Current (mA) RMS 30 25YD15-R 0 20 30 40 50 25YD22-R 25YD27-R 25YD28-R 25YD30-R 100 2500 1 10 10 Frequency (MHz) 100 10 25YD80-R 8 25YD68-R 25YD56-R 25YD55-R 25YD50-R 25YD47-R 6 4 2 Insertion Loss (dB) Leakage Current (mA) RMS 20 0 0 500 1000 1500 AC Voltage (V) RMS 2000 20 30 40 50 100 1 2500 25YD32-R 25YD33-R 25YD39-R 25YD40-R 25YD47-R 10 Frequency (MHz) 100 Insertion Loss (dB) 10 20 30 40 50 100 1 Revision: 22-Mar-2021 25YD50-R 25YD55-R 25YD56-R 25YD68-R 25YD80-R 10 Frequency (MHz) 100 Document Number: 23105 3 For technical questions, contact: ceramitesupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 25Y Series www.vishay.com Vishay Cera-Mite APPROVALS IEC 60384-14 - Safety tests This approval together with CB test certificate substitutes all national approvals. CB Certificate Y2-capacitor: CB test certificate: DE1-63498 1 nF to 8 nF 250 VAC X1-capacitor: CB test certificate: DE1-63498 1 nF to 8 nF 400 VAC VDE Y2-capacitor: VDE marks approval: 40003978 1 nF to 8 nF 250 VAC X1-capacitor: VDE marks approval: 40003978 1 nF to 8 nF 400 VAC Y2-capacitor: UL test certificate: E99264 1 nF to 8 nF 300 VAC (1) Y2-capacitor: UL test certificate: E99264 1 nF to 8 nF 250 VAC (1) X1-capacitor: UL test certificate: E99264 1 nF to 8 nF 400 VAC DIN EN 60384-14 VDE 0565-1-1 - Safety tests Underwriters Laboratories Inc. UL 60384-14, CSA E60384-1, CSA E60384-14 Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Note (1) LS ≥ 5.5 mm: 300 V ; LS < 5.5 mm: 250 V AC AC MARKING Sample CM 25Y 202M IEC 60384-14 Y2 250V~ X1 400V~ XX - XXX Notes • Marking IEC 60384-14 does not apply for Ø ≤ 9 mm • Coding is as follows: 1st figure indicates the year and 2nd figure indicates the month according to IEC 60062. The 3rd to 5th figure indicate the last three digits of the lot number RELATED DOCUMENTS General Information www.vishay.com/doc?23140 CB Test Certificate www.vishay.com/doc?22240 VDE Marks Approval www.vishay.com/doc?22241 UL Test Certificate www.vishay.com/doc?22242 Revision: 22-Mar-2021 Document Number: 23105 4 For technical questions, contact: ceramitesupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000