Not for New Designs
515D
www.vishay.com
Vishay Sprague
Aluminum Capacitors
+85 °C, Miniature, Radial Lead
FEATURES
• High CV per case size
• Low cost
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
QUICK REFERENCE DATA
RIPPLE CURRENT MULTIPLIERS
DESCRIPTION
TEMPERATURE
VALUE
Nominal case size
Ø D x L in mm
Operating temperature
Rated capacitance range, CR
0.197" x 0.433" [5.0 x 11.0]
to 0.709" x 1.575" [18.0 x 40.0]
AMBIENT TEMPERATURE
MULTIPLIERS
≤ +70 °C
1.27
-40 °C to +85 °C
-25 °C to +85 °C for 315 WVDC
to 450 WVDC units
+85 °C
0.1 μF to 18 000 μF
WVDC
CAP.
(μF)
0 to 47
0.75
1
1.35
1.57
2.00
6.3 to 100
100 to 470
0.80
1
1.23
1.34
1.50
± 20 %
Tolerance on CR
Rated voltage range, UR
6.3 WVDC to 450 WVDC
Termination
1.0
FREQUENCY (Hz)
50 TO 100 TO 300 TO
1 kHz ≥ 10 kHz
60
120
400
1000 to 18 000 0.85
2 radial leads
160 to 450
Life validation test at 85 °C
2000 h: ΔCAP ± 20 % from initial
measurement.
ΔDF 2 x initial specified limit.
ΔDCL ≤ initial specified limit.
Shelf life at 85 °C
1000 h: ΔCAP ± 20 % from initial
measurement.
ΔDF 2 x initial specified limit.
ΔDCL ≤ initial specified limit.
DC leakage current
Rated voltage for 1 and 2 min for
6.3 WVDC to 100 WVDC units:
I < 0.03 CV or 4 μA
(whichever is greater).
I < 0.04 CV or 3 μA
(whichever is greater).
Rated voltage for 1 min for
160 WVDC to 450 WVDC units:
I < 0.1 CV + 40 μA and
CV ≤ 1000; I < 0.04 CV + 100 μA
and CV > 1000
0.47 to 220
0.80
1
1.10
1.13
1.15
1
1.25
1.40
1.60
LOW TEMPERATURE PERFORMANCE
MAXIMUM IMPEDANCE RATIO Z(T) / Z(+20 °C)
MAXIMUM AT 120 Hz
RATED VOLTAGE
(WVDC)
Z - 25 °C / Z + 20 °C Z - 40 °C / Z + 20 °C
6.3
4.0
10.0
10.0
3.0
8.0
16.0
2.0
6.0
25.0
2.0
4.0
35.0 to 100.0
2.0
3.0
160.0 to 200.0
3.0
4.0
250.0
3.0
6.0
315.0 to 400.0
6.0
-
450.0
15.0
-
DIMENSIONS in inches [millimeters]
CASE
CODE
NOMINAL CASE SIZE
DxL
LEAD SPACING
S
NOMINAL LEAD DIAMETER
D
TYPICAL WEIGHT
(g)
JA
0.197 x 0.433 [5.0 x 11.0]
0.079 [2.0]
0.020 [0.50]
0.44
AA
0.248 x 0.433 [6.3 x 11.0]
0.098 [2.5]
0.020 [0.50]
0.60
BB
0.315 x 0.453 [8.0 x 11.5]
0.138 [3.5]
0.024 [0.60]
0.95
CC
CD
CG
0.394 x 0.492 [10.0 x 12.5]
0.394 x 0.630 [10.0 x 16.0]
0.394 x 0.787 [10.0 x 20.0]
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
0.024 [0.60]
0.024 [0.60]
0.024 [0.60]
1.48
1.75
2.37
Revision: 04-May-2018
Document Number: 42052
1
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs
515D
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]
CASE
CODE
NOMINAL CASE SIZE
DxL
LEAD SPACING
S
NOMINAL LEAD DIAMETER
D
TYPICAL WEIGHT
(g)
DG
DK
EK
EN
ER
FR
FV
0.492 x 0.787 [12.5 x 20.0]
0.492 x 0.984 [12.5 x 25.0]
0.630 x 0.984 [16.0 x 25.0]
0.630 x 1.240 [16.0 x 31.5]
0.630 x 1.398 [16.0 x 35.5]
0.709 x 1.398 [18.0 x 35.5]
0.709 x 1.575 [18.0 x 40.0]
0.197 [5.0]
0.197 [5.0]
0.295 [7.5]
0.295 [7.5]
0.295 [7.5]
0.295 [7.5]
0.295 [7.5]
0.024 [0.60]
0.024 [0.60]
0.031 [0.80]
0.031 [0.80]
0.031 [0.80]
0.031 [0.80]
0.031 [0.80]
3.73
4.85
7.08
8.94
10.50
12.53
15.71
ELECTROLYTIC CAPACITOR WITH CUT OR FORMED LEADS in inches [millimeters]
0.177
[4.5]
X
0.197 ± 0.20
F (1) [5.0 ± 0.5]
D
Ø d (2)
0.177
[4.5]
F (1)
D
Code S
Code S
0.033 ± 0.006
[0.85 ± 0.15]
S ± 0.20 [0.5]
Ø d (2)
0.197 ± 0.20
[5.0 ± 0.5]
Ø d (2)
Ø d (2)
0.177
[4.5]
D
Code S
X
0.197 ± 0.20
F (1) [5.0 ± 0.5]
D
Code C
0.177
[4.5]
Code S
Code F
0.039 ± 0.008
[1.0 ± 0.2]
(10, 12.5, 16, 18)
(4, 5, 6.3, 8)
DIMENSIONS in inches [millimeters]
FORMING
METHOD
FORMED
LEAD CODE
Formed and cut
F
Cut
C
Snap-in
S
D
0.197 [5.0]
0.248 [6.3]
0.315 [8.0]
0.394 [10.0]
0.492 [12.5]
0.630 [16.0]
0.709 [18.0]
0.197 [5.0]
0.248 [6.3]
0.315 [8.0]
0.394 [10.0]
0.492 [12.5]
0.630 [16.0]
0.709 [18.0]
L.S.
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
0.295 [7.5]
0.295 [7.5]
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
0.295 [7.5]
0.295 [7.5]
DIMENSIONS
P
0.079 [2.0]
0.098 [2.5]
0.138 [3.5]
0.079 [2.0]
0.098 [2.5]
0.138 [3.5]
-
e (3)
0.043 [1.1]
0.043 [1.1]
0.051 [1.3]
0.051 [1.3]
0.051 [1.3]
0.051 [1.3]
0.051 [1.3]
X (Max.)
0.059 [1.5]
0.098 [2.5]
0.098 [2.5]
0.059 [1.5]
0.059 [1.5]
0.059 [1.5]
-
Notes
• Coding of cut or formed lead to be added to the end of type number in 15th position (with position 14 coded “6”)
(1) Formed lead
(2) Lead thickness Ø d depends on capacitor specification
(3) Lead protrusion at bottom of tape
Revision: 04-May-2018
Document Number: 42052
2
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs
515D
www.vishay.com
Vishay Sprague
TAPED CAPACITORS FOR AUTOMATIC INSERTION SYSTEMS in inches [millimeters]
PACKAGING
SPECIFICATION
LEAD CODE
14th AND 15th
DIGITS OF PN
LEAD STYLE
8P
Formed lead (1)
Ammo pack
+
LEAD
SPACE
-
CAPACITOR SIZES AVAILABLE
LEADER
-
0.197 x 0.433 - 0.492 x 0.787 [5.0 x 11.0 - 12.5 x 20.0]
0.197 [5.0]
Case codes JA, AA, BB, CC, CD, DG
Notes
• The ammo pack code is to be added at the end of part number in the 14th and 15th position as 8P. To specify formed, cut or snap-in leads
and for tape and ammo, both positions 14 and 15 of the type number must be filled in with the proper codes
(1) Except 0.394 [10.0 mm] and 0.492 [12.5 mm] diameter have straight unformed leads
TAPING SPECIFICATIONS in inches [millimeters]
Formed Lead Type
P
K
H
H0
F
W0
P0
W
D0
Ød
t
DIMENSIONS in inches [millimeters]
CASE SIZE
(Diameter x Length)
ITEM
FORMED LEAD TYPE
0.197 x 0.433
[5.0 x 11.0]
0.248 x 0.433
[6.3 x 11.0]
STRAIGHT LEAD TYPE
0.315 x 0.453
[8.0 x 11.5]
0.394 [10.0]
(Dia.)
0.492 [12.5]
(Dia.)
Ø d - Lead-wire diameter
0.020 [0.5]
0.020 [0.5]
0.024 [0.6]
0.024 [0.6]
0.024 [0.6]
P - Pitch of component
0.500 [12.7]
0.500 [12.7]
0.500 [12.7]
0.500 [12.7]
0.591 [15.0]
P0 - Feed hole pitch
0.500 [12.7]
0.500 [12.7]
0.500 [12.7]
0.500 [12.7]
0.591 [15.0]
F - Lead-to-lead distance
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
0.197 [5.0]
K - Clinch height
0.098 [2.5]
0.098 [2.5]
0.157 [4.0]
-
-
H - Height of component
0.728 [18.5]
0.728 [18.5]
0.787 [20.0]
0.728 [18.5]
0.630 [16.0]
H0 - Lead-wire clinch height
0.630 [16.0]
0.630 [16.0]
0.630 [16.0]
-
-
W - Tape width
0.709 [18.0]
0.709 [18.0]
0.709 [18.0]
0.709 [18.0]
0.709 [18.0]
W0 - Hold down tape width
0.512 [13.0]
0.512 [13.0]
0.512 [13.0]
0.512 [13.0]
0.512 [13.0]
D0 - Feed hole diameter
0.157 [4.0]
0.157 [4.0]
0.157 [4.0]
0.157 [4.0]
0.157 [4.0]
t - Total tape thickness
0.157 [4.0]
0.157 [4.0]
0.157 [4.0]
0.157 [4.0]
0.157 [4.0]
Revision: 04-May-2018
Document Number: 42052
3
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs
515D
www.vishay.com
Vishay Sprague
ORDERING EXAMPLE
Electrolytic capacitor 515D series:
515D 107 M 6R3 JA 6 A E3
DESCRIPTION
CODE
515D
107
M
6R3
JA
6
A
E3
EXPLANATION
Product type
Capacitance value (100 μF)
Tolerance (M = ± 20 %)
Voltage rating at 85 °C (6R3 = 6.3 V)
Can size (see Dimensions table)
Packaging (bulk)
Lead style (uncut)
RoHS compliant indicator
PACKING AND LEAD STYLES
6A
6C
6F
6S
8P
Bulk, uncut leads
Bulk, cut leads
Bulk; formed and cut leads
Bulk, snap-in leads
Ammopack (case codes JA, AA, BB, CC, CD, CG, DG only)
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
PART NUMBER
22.0
33.0
47.0
100.0
220.0
330.0
470.0
1000.0
2200.0
3300.0
4700.0
6800.0
10 000.0
15 000.0
18 000.0
515D226M6R3JA6AE3
515D336M6R3JA6AE3
515D476M6R3JA6AE3
515D107M6R3JA6AE3
515D227M6R3AA6AE3
515D337M6R3AA6AE3
515D477M6R3BB6AE3
515D108M6R3CC6AE3
515D228M6R3DG6AE3
515D338M6R3DG6AE3
515D478M6R3EK6AE3
515D688M6R3EK6AE3
515D109M6R3EN6AE3
515D159M6R3FR6AE3
515D189M6R3FV6AE3
22.0
33.0
47.0
100.0
220.0
330.0
470.0
1000.0
2200.0
3300.0
4700.0
6800.0
10 000.0
15 000.0
10.0
22.0
33.0
47.0
Revision: 04-May-2018
NOMINAL CASE SIZE
DxL
6.3 WVDC AT +85 °C, SURGE = 8 V
0.197 x 0.433 [5.0 x 11.0]
0.197 x 0.433 [5.0 x 11.0]
0.197 x 0.433 [5.0 x 11.0]
0.197 x 0.433 [5.0 x 11.0]
0.248 x 0.433 [6.3 x 11.0]
0.248 x 0.433 [6.3 x 11.0]
0.315 x 0.453 [8.0 x 11.5]
0.394 x 0.492 [10.0 x 12.5]
0.492 x 0.787 [12.5 x 20.0]
0.492 x 0.787 [12.5 x 20.0]
0.630 x 0.984 [16.0 x 25.0]
0.630 x 0.984 [16.0 x 25.0]
0.630 x 1.240 [16.0 x 31.5]
0.709 x 1.398 [18.0 x 35.5]
0.709 x 1.575 [18.0 x 40.0]
10 WVDC AT +85 °C, SURGE = 13 V
515D226M010JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D336M010JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D476M010JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D107M010JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D227M010AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D337M010BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D477M010BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D108M010CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D228M010DG6AE3
0.492 x 0.787 [12.5 x 20.0]
515D338M010DK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D478M010EK6AE3
0.630 x 0.984 [16.0 x 25.0]
515D688M010EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D109M010FR6AE3
0.709 x 1.398 [18.0 x 35.5]
515D159M010FV6AE3
0.709 x 1.575 [18.0 x 40.0]
16 WVDC AT +85 °C, SURGE = 20 V
515D106M016JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D226M016JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D336M016JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D476M016JA6AE3
0.197 x 0.433 [5.0 x 11.0]
MAX. RIPPLE
AT +85 °C
120 Hz (mA)
MAX. DF
AT +20 °C
120 Hz
34.0
42.0
50.0
77.0
215.0
265.0
360.0
570.0
1050.0
1250.0
1700.0
1900.0
2250.0
2680.0
2750.0
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
0.24
38.0
47.0
59.0
145.0
230.0
330.0
390.0
630.0
1100.0
1400.0
1800.0
2150.0
2500.0
2720.0
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
28.0
44.0
57.0
168.0
0.16
0.16
0.16
0.16
Document Number: 42052
4
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs
515D
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
100.0
220.0
330.0
470.0
1000.0
2200.0
3300.0
4700.0
6800.0
10 000.0
4.7
10.0
22.0
33.0
47.0
100.0
220.0
330.0
470.0
1000.0
2200.0
3300.0
4700.0
4.7
10.0
22.0
33.0
47.0
100.0
220.0
330.0
470.0
1000.0
2200.0
3300.0
4700.0
0.10
0.22
0.33
0.47
1.0
2.2
3.3
4.7
10.0
22.0
33.0
47.0
100.0
220.0
330.0
470.0
1000.0
2200.0
Revision: 04-May-2018
PART NUMBER
NOMINAL CASE SIZE
DxL
16 WVDC AT +85 °C, SURGE = 20 V
0.248 x 0.433 [6.3 x 11.0]
0.315 x 0.453 [8.0 x 11.5]
0.315 x 0.453 [8.0 x 11.5]
0.394 x 0.492 [10.0 x 12.5]
0.394 x 0.787 [10.0 x 20.0]
0.492 x 0.984 [12.5 x 25.0]
0.630 x 0.984 [16.0 x 25.0]
0.630 x 1.240 [16.0 x 31.5]
0.709 x 1.398 [18.0 x 35.5]
0.709 x 1.575 [18.0 x 40.0]
25 WVDC AT +85 °C, SURGE = 32 V
515D475M025JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D106M025JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D226M025JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D336M025JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D476M025JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D107M025AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D227M025BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D337M025CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D477M025CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D108M025DG6AE3
0.492 x 0.787 [12.5 x 20.0]
515D228M025EK6AE3
0.630 x 0.984 [16.0 x 25.0]
515D338M025EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D478M025FR6AE3
0.709 x 1.398 [18.0 x 35.5]
35 WVDC AT +85 °C, SURGE = 44 V
515D475M035JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D106M035JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D226M035JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D336M035JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D476M035AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D107M035BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D227M035CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D337M035CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D477M035CG6AE3
0.394 x 0.787 [10.0 x 20.0]
515D108M035DK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D228M035EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D338M035FR6AE3
0.709 x 1.382 [18.0 x 35.5]
515D478M035FV6AE3
0.709 x 1.575 [18.0 x 40.0]
50 WVDC AT +85 °C, SURGE = 63 V
515D104M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D224M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D334M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D474M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D105M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D225M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D335M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D475M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D106M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D226M050JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D336M050AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D476M050AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D107M050BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D227M050CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D337M050CG6AE3
0.394 x 0.787 [10.0 x 20.0]
515D477M050DG6AE3
0.492 x 0.787 [12.5 x 20.0]
515D108M050EK6AE3
0.630 x 0.984 [16.0 x 25.0]
515D228M050FR6AE3
0.709 x 1.398 [18.0 x 35.5]
515D107M016AA6AE3
515D227M016BB6AE3
515D337M016BB6AE3
515D477M016CC6AE3
515D108M016CG6AE3
515D228M016DK6AE3
515D338M016EK6AE3
515D478M016EN6AE3
515D688M016FR6AE3
515D109M016FV6AE3
MAX. RIPPLE
AT +85 °C
120 Hz (mA)
MAX. DF
AT +20 °C
120 Hz
175.0
300.0
360.0
470.0
790.0
1350.0
1700.0
2100.0
2500.0
2640.0
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
0.16
30.0
33.0
51.0
63.0
115.0
185.0
320.0
420.0
540.0
950.0
1550.0
1950.0
2360.0
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
24.0
36.0
57.0
105.0
140.0
230.0
370.0
490.0
640.0
1100.0
1850.0
2220.0
2490.0
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
1.0
2.3
3.5
5.0
10.0
19.0
24.0
29.0
44.0
95.0
125.0
150.0
250.0
440.0
580.0
760.0
1350.0
2090.0
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
Document Number: 42052
5
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs
515D
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
4.7
10.0
22.0
33.0
47.0
100.0
220.0
330.0
470.0
1000.0
2200.0
0.10
0.22
0.33
0.47
1.0
2.2
3.3
4.7
10.0
22.0
33.0
47.0
100.0
220.0
330.0
470.0
1000.0
0.47
1.0
2.2
3.3
4.7
10.0
22.0
33.0
47.0
100.0
220.0
0.47
1.0
2.2
3.3
4.7
10.0
22.0
33.0
47.0
100.0
220.0
Revision: 04-May-2018
PART NUMBER
NOMINAL CASE SIZE
DxL
63 WVDC AT +85 °C, SURGE = 79 V
515D475M063JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D106M063JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D226M063AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D336M063AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D476M063BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D107M063CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D227M063CG6AE3
0.394 x 0.787 [10.0 x 20.0]
515D337M063DG6AE3
0.492 x 0.787 [12.5 x 20.0]
515D477M063DK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D108M063EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D228M063FV6AE3
0.709 x 1.575 [18.0 x 40.0]
100 WVDC AT +85 °C, SURGE = 125 V
515D104M100JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D224M100JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D334M100JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D474M100JA6AE3
0.197 x .0433 [5.0 x 11.0]
515D105M100JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D225M100JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D335M100JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D475M100JA6AE3
0.197 x 0.433 [5.0 x 11.0]
515D106M100AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D226M100BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D336M100CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D476M100CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D107M100DG6AE3
0.492 x 0.787 [12.5 x 20.0]
515D227M100EK6AE3
0.630 x 0.984 [16.0 x 25.0]
515D337M100EK6AE3
0.630 x 0.984 [16.0 x 25.0]
515D477M100EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D108M100FV6AE3
0.709 x 1.575 [18.0 x 40.0]
160 WVDC AT +85 °C, SURGE = 200 V
515D474M160AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D105M160AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D225M160AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D335M160BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D475M160BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D106M160CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D226M160CG6AE3
0.394 x 0.787 [10.0 x 20.0]
515D336M160DG6AE3
0.492 x 0.787 [12.5 x 20.0]
515D476M160DK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D107M160EK6AE3
0.630 x 0.984 [16.0 x 25.0]
515D227M160FR6AE3
0.709 x 1.398 [18.0 x 35.5]
200 WVDC AT +85 °C, SURGE = 250 V
515D474M200AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D105M200AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D225M200AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D335M200BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D475M200CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D106M200CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D226M200CG6AE3
0.394 x 0.787 [10.0 x 20.0]
515D336M200DK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D476M200DK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D107M200EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D227M200FV6AE3
0.709 x 1.575 [18.0 x 40.0]
MAX. RIPPLE
AT +85 °C
120 Hz (mA)
MAX. DF
AT +20 °C
120 Hz
45.0
70.0
115.0
140.0
190.0
300.0
490.0
680.0
880.0
1550.0
2200.0
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
2.1
4.7
7.0
10.0
21.0
30.0
40.0
45.0
75.0
130.0
170.0
230.0
400.0
710.0
860.0
1100.0
1690.0
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
12.0
17.0
26.0
35.0
40.0
65.0
110.0
150.0
180.0
300.0
510.0
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
12.0
17.0
26.0
35.0
45.0
70.0
110.0
160.0
180.0
330.0
520.0
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
Document Number: 42052
6
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs
515D
www.vishay.com
Vishay Sprague
ELECTRICAL DATA AND ORDERING INFORMATION
CAPACITANCE
(μF)
0.47
1.0
2.2
3.3
4.7
10.0
33.0
47.0
100.0
1.0
2.2
3.3
4.7
10.0
22.0
33.0
47.0
100.0
1.0
2.2
3.3
4.7
10.0
22.0
33.0
47.0
1.0
2.2
3.3
4.7
10.0
22.0
33.0
47.0
1.0
2.2
4.7
10.0
22.0
33.0
PART NUMBER
NOMINAL CASE SIZE
DxL
250 WVDC AT +85 °C, SURGE = 300 V
515D474M250AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D105M250AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D225M250BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D335M250CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D475M250CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D106M250CG6AE3
0.394 x 0.787 [10.0 x 20.0]
515D336M250DK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D476M250EK6AE3
0.630 x 1.240 [16.0 x 31.5]
515D107M250FR6AE3
0.709 x 1.575 [18.0 x 40.0]
315 WVDC AT +85 °C, SURGE = 365 V
515D105M315AA6AE3
0.248 x 0.433 [6.3 x 11.0]
515D225M315BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D335M315CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D475M315CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D106M315CG6AE3
0.394 x 0.787 [10.0 x 20.0]
515D226M315DK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D336M315EK6AE3
0.630 x 0.984 [16.0 x 25.0]
515D476M315EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D107M315FV6AE3
0.709 x 1.575 [18.0 x 40.0]
350 WVDC AT +85 °C, SURGE = 400 V
515D105M350BB6AE3
0.315 x 453 [8.0 x 11.5]
515D225M350CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D335M350CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D475M350CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D106M350DG6AE3
0.492 x 0.787 [12.5 x 20.0]
515D226M350DK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D336M350EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D476M350FR6AE3
0.709 x 1.398 [18.0 x 35.5]
400 WVDC AT +85 °C, SURGE = 450 V
515D105M400BB6AE3
0.315 x 0.453 [8.0 x 11.5]
515D225M400CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D335M400CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D475M400CD6AE3
0.394 x 0.787 [10.0 x 20.0]
515D106M400DG6AE3
0.492 x 0.787 [12.5 x 20.0]
515D226M400DK6AE3
0.630 x 0.984 [16.0 x 25.0]
515D336M400EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D476M400FR6AE3
0.709 x 1.398 [18.0 x 35.5]
450 WVDC AT +85 °C, SURGE = 500 V
515D105M450CC6AE3
0.394 x 0.492 [10.0 x 12.5]
515D225M450CD6AE3
0.394 x 0.630 [10.0 x 16.0]
515D475M450DG6AE3
0.492 x 0.787 [12.5 x 20.0]
515D106M450EK6AE3
0.492 x 0.984 [12.5 x 25.0]
515D226M450EN6AE3
0.630 x 1.240 [16.0 x 31.5]
515D336M450FR6AE3
0.709 x 1.398 [18.0 x 35.5]
MAX. RIPPLE
AT +85 °C
120 Hz (mA)
MAX. DF
AT +20 °C
120 Hz
12.0
17.0
30.0
35.0
45.0
70.0
160.0
210.0
340.0
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
17.0
30.0
35.0
45.0
70.0
120.0
150.0
190.0
340.0
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
18.0
28.0
35.0
40.0
70.0
110.0
140.0
220.0
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
18.0
28.0
35.0
45.0
70.0
110.0
140.0
220.0
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
19.0
29.0
50.0
75.0
110.0
170.0
0.25
0.25
0.25
0.25
0.25
0.25
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
Revision: 04-May-2018
Document Number: 42052
7
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
1
Document Number: 91000
工商网监
湘ICP备2023018690号
