SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
Surface Mount TRANSZORB® Transient Voltage Suppressors
FEATURES
• Low profile package
Available
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional
• Excellent clamping capability
• Very fast response time
SMC (DO-214AB)
Cathode
Anode
(unidirectional)
Available
• Low incremental surge resistance
(bidirectional)
LINKS TO ADDITIONAL RESOURCES
3D 3D
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3D Models
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
VBR unidirectional
6.40 V to 231 V
VBR bidirectional
6.40 V to 231 V
VWM
5.0 V to 188 V
PPPM
1500 W
PD
6.5 W
IFSM (unidirectional only)
200 A
TJ max.
150 °C
Polarity
Unidirectional, bidirectional
Package
SMC (DO-214AB)
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional devices use CA suffix (e.g. SMCJ188CA).
Electrical characteristics apply in both directions.
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: SMC (DO-214AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
Polarity: for unidirectional types the band denotes cathode
end, no marking on bidirectional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
SYMBOL
VALUE
UNIT
Peak pulse power dissipation with a 10/1000 μs waveform (1)(2)
PARAMETER
PPPM
1500
W
Peak pulse current with a 10/1000 μs waveform (1)
IPPM
See next table
A
Power dissipation on infinite heatsink, TA = 50 °C
PD
6.5
W
Peak forward surge current 8.3 ms single half sine-wave unidirectional only
(2)
Operating junction and storage temperature range
IFSM
200
A
TJ, TSTG
-55 to +150
°C
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2
A
(2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal
Revision: 30-Jun-2021
Document Number: 88394
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
DEVICE TYPE
MODIFIED
“J” BEND
LEAD
(+)SMCJ5.0A (5)
(+)SMCJ6.0A
(+)SMCJ6.5A
(+)SMCJ7.0A
(+)SMCJ7.5A
(+)SMCJ8.0A
(+)SMCJ8.5A
(+)SMCJ9.0A
(+)SMCJ10A
(+)SMCJ11A
(+)SMCJ12A
(+)SMCJ13A
(+)SMCJ14A
(+)SMCJ15A
(+)SMCJ16A
(+)SMCJ17A
(+)SMCJ18A
(+)SMCJ20A
(+)SMCJ22A
(+)SMCJ24A
(+)SMCJ26A
(+)SMCJ28A
(+)SMCJ30A
(+)SMCJ33A
(+)SMCJ36A
(+)SMCJ40A
(+)SMCJ43A
(+)SMCJ45A
(+)SMCJ48A
(+)SMCJ51A
(+)SMCJ54A
(+)SMCJ58A
(+)SMCJ60A
(+)SMCJ64A
(+)SMCJ70A
(+)SMCJ75A
(+)SMCJ78A
(+)SMCJ85A
(+)SMCJ90A
(+)SMCJ100A
(+)SMCJ110A
(+)SMCJ120A
(+)SMCJ130A
(+)SMCJ150A
(+)SMCJ160A
(+)SMCJ170A
SMCJ188A
DEVICE
MARKING
CODE
UNI
GDE
GDG
GDK
GDM
GDP
GDR
GDT
GDV
GDX
GDZ
GEE
GEG
GEK
GEM
GEP
GER
GET
GEV
GEX
GEZ
GFE
GFG
GFK
GFM
GFP
GFR
GFT
GFV
GFX
GFZ
GGE
GGG
GGK
GGM
GGP
GGR
GGT
GGV
GGX
GGZ
GHE
GHG
GHK
GHM
GHP
GHR
GHS
BI
GDE
GDG
BDK
GDM
BDP
BDR
BDT
BDV
BDX
GDZ
BEE
GEG
BEK
BEM
GEP
GER
BET
BEV
BEX
BEZ
BFE
BFG
BFK
BFM
BFP
BFR
BFT
GFV
GFX
GFZ
GGE
GGG
GGK
GGM
GGP
GGR
GGT
GGV
GGX
GGZ
GHE
GHG
GHK
GHM
GHP
GHR
GHS
BREAKDOWN
VOLTAGE
VBR AT IT (1)
(V)
MIN.
MAX.
6.40
7.07
6.67
7.37
7.22
7.98
7.78
8.60
8.33
9.21
8.89
9.83
9.44
10.4
10.0
11.1
11.1
12.3
12.2
13.5
13.3
14.7
14.4
15.9
15.6
17.2
16.7
18.5
17.8
19.7
18.9
20.9
20.0
22.1
22.2
24.5
24.4
26.9
26.7
29.5
28.9
31.9
31.1
34.4
33.3
36.8
36.7
40.6
40.0
44.2
44.4
49.1
47.8
52.8
50.0
55.3
53.3
58.9
56.7
62.7
60.0
66.3
64.4
71.2
66.7
73.7
71.1
78.6
77.8
86.0
83.3
92.1
86.7
95.8
94.4
104
100
111
111
123
122
135
133
147
144
159
167
185
178
197
189
209
209
231
STAND-OFF
TEST
CURRENT VOLTAGE
VWM
IT
(mA)
(V)
10
10
10
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
188
MAXIMUM
REVERSE
LEAKAGE
AT VWM
ID (μA) (3)
1000
1000
500
200
100
50
20
10
5.0
5.0
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
MAXIMUM
PEAK PULSE
SURGE
CURRENT
IPPM (A) (2)
163.0
145.6
133.9
125.0
116.3
110.3
104.2
97.4
88.2
82.4
75.4
69.8
64.7
61.5
57.7
54.3
51.4
46.3
42.3
38.6
35.6
33.0
31.0
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.9
10.9
10.3
9.3
8.5
7.8
7.2
6.2
5.8
5.5
4.6
MAXIMUM
CLAMPING
VOLTAGE
AT IPPM
VC (V)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
126
137
146
162
177
193
209
243
259
275
328
MAXIMUM
TEMPERATURE
COEFFICIENT
OF VBR
(%/°C)
0.057
0.059
0.061
0.065
0.067
0.069
0.073
0.074
0.078
0.080
0.083
0.084
0.087
0.088
0.089
0.090
0.092
0.094
0.096
0.096
0.097
0.098
0.099
0.100
0.100
0.101
0.102
0.102
0.103
0.104
0.104
0.104
0.105
0.105
0.105
0.106
0.106
0.106
0.106
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.108
Notes
(1) Pulse test: t ≤ 50 ms
p
(2) Surge current waveform per fig. 3 and derate per fig. 2
(3) For bidirectional types having V
WM of 10 V and less, the ID limit is doubled
(4) All terms and symbols are consistent with ANSI/IEEE C62.35
(5) For the bidirectional SMCJ5.0CA, the maximum V
BR is 7.25 V
(6) V = 3.5 V at I = 100 A (unidirectional only)
F
F
(+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number
E136766 for both uni-directional and bi-directional devices
Revision: 30-Jun-2021
Document Number: 88394
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
Typical thermal resistance, junction to ambient air (1)
RθJA
75
Typical thermal resistance, junction to lead
RθJL
15
UNIT
°C/ W
Note
(1) Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
SMCJ5.0A-E3/57T
SMCJ5.0A-M3/57T
SMCJ5.0A-E3/9AT
SMCJ5.0A-M3/9AT
SMCJ5.0AHE3_A/H (1)
SMCJ5.0AHM3_A/H (1)
SMCJ5.0AHE3_A/I (1)
SMCJ5.0AHM3_A/I (1)
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.211
57T
850
7" diameter plastic tape and reel
0.211
9AT
3500
13" diameter plastic tape and reel
0.211
H
850
7" diameter plastic tape and reel
0.211
I
3500
13" diameter plastic tape and reel
Note
AEC-Q101 qualified
(1)
Revision: 30-Jun-2021
Document Number: 88394
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
20 000
10
1
0.31 x 0.31" (8.0 x 8.0 mm)
Copper pad areas
0.1
0.1 µs
1000
VR, measured at
Stand-off voltage VWM
100
Uni-directional
Bi-directional
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1
10
100
400
td - Pulse Width (s)
VWM - Reverse Stand-Off Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance Unidirectional
100
100
Transient Thermal Impedance (°C/W)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage, %
Measured at
zero bias
10 000
CJ - Junction Capacitance (pF)
PPPM - Peak Pulse Power (kW)
100
75
50
25
25
50
75
100
125
150
175
1.0
0.1
0.001
0
0
10
200
0.01
0.1
1
10
100
1000
TJ - Initial Temperature (°C)
tp - Pulse Duration (s)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 5 - Typical Transient Thermal Impedance
Peak value
IPPM
100
200
TJ = 25 °C
Pulse width (td)
is defined as the point
where the peak current
decays to 50 % of IPPM
tr = 10 µs
Half value IPPM
50
Peak Forward Surge Current (A)
IPPM - Peak Pulse Current, % IRSM
150
IPP
2
10/1000 µs waveform
as defined by R.E.A.
100
TJ = TJ max.
8.3 ms single half sine-wave
td
0
10
0
1.0
2.0
3.0
4.0
1
10
100
t - Time (ms)
Number of Cycles at 60 Hz
Fig. 3 - Pulse Waveform
Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current
Unidirectional Use On
Revision: 30-Jun-2021
Document Number: 88394
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMCJ5.0A thru SMCJ188CA
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMC (DO-214AB)
Mounting Pad Layout
Cathode Band
0.185 (4.69)
MAX.
0.126 (3.20)
0.246 (6.22)
0.220 (5.59)
0.114 (2.90)
0.126 (3.20)
MIN.
0.280 (7.11)
0.060 (1.52)
MIN.
0.260 (6.60)
0.012 (0.305)
0.006 (0.152)
0.320 REF.
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.320 (8.13)
0.305 (7.75)
Revision: 30-Jun-2021
Document Number: 88394
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
工商网监
湘ICP备2023018690号
