VJ1825Y225KXXAT

VJ Source Energy Capacitor (SEC) www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications FEATURES • Low electrostrictive ceramic formulation for repeated charge and discharge cycles • High pulse discharge currents Available Available • Excellent reliability and high voltage performance • Available with tin / lead barrier termination (code “L”) • Wet built process • Reliable Noble Metal Electrode (NME) system • Made with a combination of design, materials and tight process control to achieve very high field reliability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS • Power supplies • Converters • Voltage multipliers ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Aging Rate: 1 % maximum per decade Capacitance Range: 4.7 nF to 560 nF Insulation Resistance (IR):  at +25 °C and rated voltage: 100 000 M minimum or 1000 F, whichever is less at +125 °C and rated voltage: 10 000 M minimum or 100 F, whichever is less Voltage Range: 1000 VDC, 1500 VDC Temperature Coefficient of Capacitance (TCC):  X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied Dissipation Factor (DF):  2.5 % max. at 1.0 VRMS and 1 kHz Revision: 25-May-2018 Dielectric Strength Test: performed per method 103 of EIA 198-2-E.  Applied test voltages:  1000 VDC / 1500 VDC-rated: min. 120 % of rated voltage Document Number: 45210 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Source Energy Capacitor (SEC) www.vishay.com Vishay Vitramon DIMENSIONS in inches [millimeters] W L T MAX. P TERMINATION (P) PART ORDERING NUMBER LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 1812 VJ1812 0.177 ± 0.012 [4.50 ± 0.30] 0.126 ± 0.008 [3.20 ± 0.20] 0.086 [2.18] 0.010 [0.25] 0.035 [0.90] 1825 VJ1825 0.177 ± 0.012 [4.50 ± 0.30] 0.252 ± 0.010 [6.40 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.035 [0.90] 2225 VJ2225 0.220 ± 0.010 [5.59 ± 0.25] 0.250 ± 0.010 [6.35 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.037 [0.95] 3040 VJ3040 0.300 ± 0.015 [7.62 ± 0.38] 0.400 ± 0.015 [10.20 ± 0.38] 0.100 [2.54] 0.010 [0.25] 0.039 [1.00] 3640 VJ3640 0.360 ± 0.015 [9.14 ± 0.38] 0.400 ± 0.015 [10.20 ± 0.38] 0.010 [0.25] 0.039 [1.00] 4044 VJ4044 0.400 ± 0.015 [10.16 ± 0.38] 0.440 ± 0.015 [11.17 ± 0.38] 0.020 [0.50] 0.040 [1.00] CASE CODE 0.130 (1) [3.30] 0.120 [3.05] 0.120 [3.05] Note (1) Thickness used for 3640 - 1500 V - 220 nF and 270 nF QUICK REFERENCE DATA DIELECTRIC CAPACITANCE CASE MAXIMUM VOLTAGE (V) MINIMUM MAXIMUM 1812 1500 4.7 nF 27 nF 1825 1500 10 nF 56 nF 2225 1500 18 nF 100 nF 3040 1500 33 nF 220 nF 3640 1500 47 nF 330 nF 4044 1500 100 nF 560 nF X7R (X5P) Note • Detail ratings see “Selection Chart” ORDERING INFORMATION VJ3640 Y 184 CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE 1812 1825 2225 3040 3640 4044 Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 184 = 180 000 pF K X R A CAPACITANCE TERMINATION DC VOLTAGE TOLERANCE RATING (1) J=±5% K = ± 10 % M = ± 20 % X = Ni barrier 100 % tin matte plated L = Ni barrier with tin lead plated finish min. 4 % lead G = 1000 V R = 1500 V MARKING A = unmarked T SE PACKAGING (3) PROCESS CODE (2) T = 7" reel / plastic tape J = 7" reel / plastic tape (low quantity) Notes (1) DC voltage rating should not be exceeded in application. (2) Process code with 2 digits has to be added. (3) All types of packaging may not be available for all case sizes, see table end of this datasheet. Revision: 25-May-2018 Document Number: 45210 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Source Energy Capacitor (SEC) www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R VJ1812 (1) STYLE CASE CODE VJ1825 (1) 1812 VJ2225 (1) 1825 VJ3040 (1) 2225 VJ3640 (1) 3040 VJ4044 (1) 3640 4044 VOLTAGE (VDC) 1000 1500 1000 1500 1000 1500 1000 1500 1000 1500 1000 1500 VOLTAGE CODE G R G R G R G R G R G R CAP. CODE CAP. 332 3.3 nF 392 3.9 nF 472 4.7 nF • 562 5.6 nF • 682 6.8 nF • • 822 8.2 nF • • 103 10 nF • • 123 12 nF • • 153 15 nF • • • • 183 18 nF • • • • 223 22 nF • • • 273 27 nF • • • • • 333 33 nF • • • • • 393 39 nF • • • • • 473 47 nF • • • • • 563 56 nF • • • • • • 683 68 nF • • • • • 823 82 nF • • • 104 100 nF • • • • • • 124 120 nF • • • • • 154 150 nF • • • • • 184 180 nF • • • • • 224 220 nF • • • • • 274 270 nF • • • • 334 330 nF • • • 394 390 nF • 474 470 nF • 564 560 nF • 684 680 nF 824 820 nF 105 1000 nF • • • • • Notes RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L” • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 Revision: 25-May-2018 Document Number: 45210 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Source Energy Capacitor (SEC) www.vishay.com Vishay Vitramon TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE 20 0 15 -10 Δ CAPACITANCE (%) Δ CAPACITANCE (%) VOLTAGE COEFFICIENT OF CAPACITANCE 10 4044, 330 nF, 1500 V -20 -30 -40 3640, 180 nF, 1500 V -50 -60 X7R: ± 15 % from -55 °C to 125 °C 3640, 180 nF, 1500 V 10 5 0 TCC also meets X5P ± 10 % from -55 °C to +85 °C -5 -10 4044, 330 nF, 1500 V -15 -70 -80 -20 0 250 500 750 1000 1250 APPLIED VOLTAGE (VDC) -75 -55 -35 -15 5 25 45 65 TEMPERATURE (°C) 1500 DISCHARGE PULSE OF 330 nF, 4044 SEC PEAK DISCHARGE CURRENT (A) DISCHARGE CURRENT VS. CHARGE VOLTAGE 2500 4044, 330 nF, 1500 V 3040, 120 nF, 1500 V 2225, 100 nF, 1000 V 1825, 56 nF, 1000 V 1812, 27 nF, 1000 V 2000 1500 1000 500 0 600 DISSIPATION FACTOR VS. TEMPERATURE 1400 60 0.035 4044 TEMPERATURE (°C) DISSIPATION FACTOR 800 1000 1200 CHARGE VOLTAGE (VDC) TEMPERATURE VS. RIPPLE CURRENT 0.040 0.030 0.025 0.020 85 105 125 3640 0.015 0.010 0.005 0.000 50 40 30 20 1825, 27 nF, 1000 V tested at 240 kHz 1825, 56 nF, 1000 V tested at 120 kHz 2225, 100 nF, 1000 V tested at 60 kHz 10 0 -55 -35 -15 5 25 45 TEMPERATURE (°C) 65 85 0 0.1 0.2 0.3 0.4 0.5 CURRENT (A) 0.6 0.7     Revision: 25-May-2018 Document Number: 45210 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Source Energy Capacitor (SEC) www.vishay.com Vishay Vitramon STANDARD PACKAGING QUANTITIES 7" REEL QUANTITIES CASE CODE TAPE SIZE PLASTIC TAPE PACKAGING CODE “T” LOW QUANTITY PACKAGING CODE “J” 1812 12 mm 1000 500 1825 12 mm 1000 500 2225 12 mm 500 250 3040 16 mm 500 n/a 3640 16 mm 350 n/a 4044 24 mm 300 n/a Notes • Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” • n/a = not available STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment.  Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 25-May-2018 Document Number: 45210 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000