VS-50PF140

VS-50PF(R)...(W) High Voltage Series www.vishay.com Vishay Semiconductors Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 50 A FEATURES 50PF(R)... 50PF(R)...W • High surge current capability • Designed for a wide range of applications • Stud cathode and stud anode version • Wire version available • Low thermal resistance • Designed and qualified for multiple level DO-5 (DO-203AB) DO-5 (DO-203AB) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS • Converters PRIMARY CHARACTERISTICS • Power supplies IF(AV) 50 A Package DO-5 (DO-203AB) Circuit configuration Single • Machine tool controls • Welding • Any high voltage input rectification bridge MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) TC IF(RMS) IFSM I2t VRRM VALUES UNITS 50 A 128 °C 78 A 50 Hz 570 60 Hz 595 A 50 Hz 1600 60 Hz 1450 Range 1400 to 1600 V -55 to +160 °C TJ A2s ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-50PF(R)...(W) VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 140 1400 1650 160 1600 1900 IRRM MAXIMUM AT TJ = 150 °C mA 4.5 Revision: 11-Jan-18 Document Number: 93517 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50PF(R)...(W) High Voltage Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at case temperature IF(AV) Maximum RMS forward current TEST CONDITIONS 180° conduction, half sine wave IF(RMS) t = 10 ms Maximum peak, one cycle forward, non-repetitive surge current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t I2t for fusing t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing I2t Low level value of threshold voltage UNITS 50 A 128 °C 78 A No voltage reapplied 570 100 % VRRM reapplied 480 No voltage reapplied 595 Sinusoidal half wave, initial TJ = 150 °C A 500 1600 1450 A2s 1150 100 % VRRM reapplied 1050 t = 0.1 ms to 10 ms, no voltage reapplied A2s 16 000 VF(TO) (16.7 % x  x IF(AV) < I <  x IF(AV)), TJ = TJ maximum 0.77 V rf (16.7 % x  x IF(AV) < I <  x IF(AV)), TJ = TJ maximum 4.30 m VFM Ipk = 125 A, TJ = 25 °C, tp = 400 μs rectangular wave 1.50 V Low level value of forward slope resistance Maximum forward voltage drop VALUES THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range SYMBOL TEST CONDITIONS TJ, TStg VALUES UNITS -55 to 160 °C Maximum thermal resistance, junction to case RthJC DC operation 0.51 Thermal resistance, case to heatsink RthCS Mounting surface, smooth, flat and greased 0.25 Not lubricated thread, tighting on nut (1) 3.4 (30) Lubricated thread, tighting on nut (1) 2.3 (20) Not lubricated thread, tighting on hexagon (2) 4.2 (37) Lubricated thread, tighting on hexagon (2) 3.2 (28) Maximum allowable mounting torque (+0 %, -10 %) K/W Approximate weight Case style N·m (lbf · in) 15.8 g 0.56 oz. See dimensions - link at the end of datasheet DO-5 (DO-203AB) Notes (1) Recommended for pass-through holes (2) Torque must be appliable only to hexagon and not to plastic structure, recommended for holed heatsink RthJC CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION 180° 0.11 0.10 120° 0.16 0.16 90° 0.20 0.22 60° 0.29 0.31 30° 0.49 0.50 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note • The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Revision: 11-Jan-18 Document Number: 93517 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50PF(R)...(W) High Voltage Series www.vishay.com Vishay Semiconductors 600 50PF(R) Series 140 to 160 RthJC = 0.51K/W 160 150 140 180˚ Sine 130 120 110 100 0 20 30 40 50 400 350 300 250 200 50PF(R) Series 40HF(R) 140 to 160Series 150 100 0.01 60 0.1 1 Average Forward Current (A) Pulse Train Duration (s) Fig. 1 - Current Ratings Characteristics Fig. 3 - Maximum Non-Repetitive Surge Current 550 Peak Half Sine Wave Forward Current (A) 10 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial Tj = Tj Max. 500 No Voltage Reapplied Rated Vrrm Reapplied 450 550 Peak Half Sine Wave Forward Current (A) 170 1000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = Tj Max. @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 500 450 400 Instantaneous Forward Current (A) Maximum Allowable Case Temperature (°C) 180 350 300 250 200 50PF(R) Series 140 to 160 150 Tj = Tj Max 100 Tj = 25˚C 10 50PF(R) 40HF (R)Series Series 140 to 160 100 1 10 1 100 0 Fig. 2 - Maximum Non-Repetitive Surge Current Transient Thermal Impedance Z thJC (K/W) 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous Forward Voltage (V) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 4 - Forward Voltage Drop Characteristics 1 Steady State Value RthJC = 0.51 K/W (DC Operation) 0.1 50PF(R)Series Series 50PF(R) 140 to 160 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 5 - Thermal Impedance ZthJC Characteristics Revision: 11-Jan-18 Document Number: 93517 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-50PF(R)...(W) High Voltage Series www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 50 PF R 160 W 1 2 3 4 5 6 1 - Vishay Semiconductors product 2 - 50 = standard device 3 - PF = plastic package 4 - None = stud normal polarity (cathode to stud) R = stud reverse polarity (anode to stud) 5 - 6 - Voltage code x 10 = VRRM (see Voltage Ratings table) None = standard terminal (see dimensions for 50PF(R)... - link at the end of datasheet) W = wire terminal (see dimensions for 50PF(R)...W - link at the end of datasheet) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95345 Revision: 11-Jan-18 Document Number: 93517 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DO-203AB (DO-5) for 50PF(R)...(W), 80PF(R)...(W), and 95PF(R)...(W) Series DIMENSIONS FOR 80PF(R), 50PF(R), AND 95PF(R) SERIES in millimeters 6.45 MIN. Ø3 4.2 MAX. 1.2 MAX. 3.5 MIN. 4 MIN. Plastic cap. 25.4 MAX. 11.45 MAX. 2.4 REF. 11 ± 0.4 1/4"28-UNF-2A 17.25 MAX. Ø 15.95 MAX. Ø 17.15 MAX. 18.9 + 0.1 0.0 Revision: 20-Apr-16 Document Number: 95345 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DIMENSIONS FOR 80PF(R)...(W), 50PF(R)...(W), AND 95PF(R)...(W) SERIES in millimeters 2.05 MAX. Plastic cap. 25.4 MAX. 11.45 MAX. 2.4 REF. 11 ± 0.4 1/4"-28-UNF-2A 17.25 MAX. Ø 15.95 MAX. Ø 17.15 MAX. 18.9 + 0.1 0.0 Revision: 20-Apr-16 Document Number: 95345 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors DIMENSIONS FOR 52PF(R), 82PF(R), AND 97PF(R) SERIES in millimeters 11.20 - 12.20 Ø 6.80 - 7.00 6.6 mm2 external lead with blue or red sleeve insulation 115.00 - 123.00 127.40 - 134.40 Plastic cap. 11.05 - 11.45 2.4 REF. 10.60 - 11.40 1/4"-28-UNF-2A Revision: 20-Apr-16 Document Number: 95345 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000