2SC5084YTE85LF

2SC5084 TOSHIBA Transistor Silicon NPN Epitaxial Planar Type 2SC5084 VHF~UHF Band Low Noise Amplifier Applications • Low noise figure, high gain. • NF = 1.1dB, |S21e|2 = 11dB (f = 1 GHz) Unit: mm Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 20 V Collector-emitter voltage VCEO 12 V Emitter-base voltage VEBO 3 V Base current IB 40 mA Collector current IC 80 mA Collector power dissipation PC 150 mW Junction temperature Tj 125 °C Tstg −55 to 125 °C Storage temperature range Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). JEDEC ― JEITA SC-59 TOSHIBA 2-3F1A Weight: 0.012 g (typ.) Microwave Characteristics (Ta = 25°C) Characteristics Transition frequency Symbol Min Typ. Max Unit VCE = 10 V, IC = 20 mA 5 7 ⎯ GHz ⎪S21e⎪ (1) 2 ⎪S21e⎪ (2) VCE = 10 V, IC = 20 mA, f = 500 MHz ⎯ 16.5 ⎯ VCE = 10 V, IC = 20 mA, f = 1 GHz 7.5 11 ⎯ NF (1) VCE = 10 V, IC = 5 mA, f = 500 MHz ⎯ 1 ⎯ NF (2) VCE = 10 V, IC = 5 mA, f = 1 GHz ⎯ 1.1 2 Min Typ. Max Unit fT 2 Insertion gain Noise figure Test Condition dB dB Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Collector cut-off current ICBO VCB = 10 V, IE = 0 ⎯ ⎯ 1 μA Emitter cut-off current IEBO VEB = 1 V, IC = 0 ⎯ ⎯ 1 μA VCE = 10 V, IC = 20 mA 80 ⎯ 240 ⎯ 1.0 ⎯ pF ⎯ 0.65 1.15 pF DC current gain hFE (Note 1) Output capacitance Cob Reverse transfer capacitance Cre VCB = 10 V, IE = 0, f = 1 MHz (Note 2) Note 1: hFE classification O: 80 to 160, Y: 120 to 240 Note 2: Cre is measured by 3 terminal method with capacitance bridge. 1 Start of commercial production 1993-10 2014-03-01 2SC5084 Marking 2 2014-03-01 2SC5084 3 2014-03-01 2SC5084 S-Parameter ZO = 50 Ω, Ta = 25°C VCE = 10 V, IC = 5 mA Frequency S11 (MHz) Mag. S21 S12 S22 Ang. Mag. Ang. Mag. Ang. Mag. Ang. 200 0.628 −77.1 9.254 126.5 0.051 53.3 0.695 −31.0 400 0.471 −122.1 6.027 103.3 0.067 48.4 0.509 −34.9 600 0.417 −149.1 4.341 90.3 0.077 51.9 0.441 −35.2 800 0.404 −167.3 3.381 81.2 0.090 56.9 0.412 −36.0 1000 0.402 178.1 2.798 73.3 0.104 62.0 0.398 −37.7 1200 0.412 166.6 2.393 66.7 0.122 66.4 0.390 −40.3 1400 0.427 156.6 2.108 60.4 0.145 69.1 0.385 −44.3 1600 0.440 147.3 1.881 54.8 0.170 69.8 0.376 −48.8 1800 0.455 140.0 1.713 49.4 0.194 70.2 0.373 −54.3 2000 0.482 132.6 1.586 44.6 0.223 71.3 0.367 −60.0 VCE = 10 V, IC = 20 mA Frequency S11 S21 S12 S22 (MHz) Mag. Ang. Mag. Ang. Mag. Ang. Mag. Ang. 200 0.340 −122.7 15.443 107.4 0.034 62.7 0.415 −40.5 400 0.299 −158.7 8.266 92.4 0.056 69.3 0.293 −34.2 600 0.293 −178.0 5.664 84.0 0.080 71.7 0.265 −30.4 800 0.294 169.0 4.334 77.3 0.104 72.1 0.255 −29.9 1000 0.299 157.9 3.528 71.2 0.129 72.0 0.252 −30.6 1200 0.310 149.5 3.002 66.0 0.155 71.4 0.254 −32.5 1400 0.321 142.0 2.629 61.0 0.183 69.7 0.255 −36.1 1600 0.332 134.9 2.336 56.3 0.209 67.6 0.248 −40.6 1800 0.341 129.5 2.121 51.7 0.234 65.6 0.242 −45.9 2000 0.366 124.3 1.958 47.3 0.260 64.6 0.236 −51.7 4 2014-03-01 2SC5084 5 2014-03-01 2SC5084 6 2014-03-01 2SC5084 RESTRICTIONS ON PRODUCT USE • Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. 7 2014-03-01