TMR3-2413

DC/DC Converters TMR 3 Series, 3 Watt Features ◆ Wide 2: Input Voltage Range ◆ Ultra-compact SIP-8 Package ◆ Small Footprint ◆ Full SMD Design ◆ Temperature Range –40° to +70°C ◆ High Efficiency ◆ Excellent Load and Line Regulation ◆ Indefinite Short-circuit Protection ◆ I/O-Isolation 500 VDC ◆ Remote On/Off Control ◆ Fully RoHS compliant ◆ 3 Year Product Warranty compliant RoHS The TMR-3 series is a new family of isolated 3W dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. The product comes in a ultra-compact SIP-8 plastic package with a small footprint occupying only 2.0 cm2 (0.3 square in.) of board space. An excellent efficiency allows –40° to +70°C operation temperatures at full load. Further features include remote On/Off control and continuous short circuit protection. The very compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumentation and industrial electronics. Models Order code TMR 3-050 TMR 3-05 TMR 3-052 TMR 3-053 TMR 3-052 TMR 3-0522 TMR 3-0523 TMR 3-20 TMR 3-2 TMR 3-22 TMR 3-23 TMR 3-22 TMR 3-222 TMR 3-223 TMR 3-240 TMR 3-24 TMR 3-242 TMR 3-243 TMR 3-242 TMR 3-2422 TMR 3-2423 TMR 3-480 TMR 3-48 TMR 3-482 TMR 3-483 TMR 3-482 TMR 3-4822 TMR 3-4823 http://www.tracopower.com Input voltage range Output voltage 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC Output current max. 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA 700 mA 600 mA 250 mA 200 mA ±300 mA ±125 mA ±100 mA Efficiency typ. 73 % 77 % 79 % 80 % 77 % 79 % 80 % 74 % 78 % 80 % 81 % 80 % 81 % 81 % 74 % 78 % 80 % 81 % 80 % 81 % 81 % 74 % 78 % 80 % 81 % 80 % 81 % 81 % Page  of 3 4.5 – 9.0 VDC (5 VDC nominal) 9 – 8 VDC (2 VDC nominal) 8 – 36 VDC (24 VDC nominal) 36 – 75 VDC (48 VDC nominal) DC/DC Converters TMR 3 Series Input Specifications Input current at full load (nominal input voltage) 4.5–9 9-–18 18–36 36–75 4.5–9 9-–18 18–36 36–75 Vin Vin Vin Vin Vin Vin Vin Vin models: models: models: models: models: models: models: models: 820 mA max. 330 mA max. 170 mA max. 85 mA max. 15 V max. 36 V max. 50 V max. 100 V max. 5 V/ms, max. (complies with ETS300 132 part 4.4) capacitor type (see application note for compliance to EN 55022 class A/B) < 1ms at nominal input and resistive load ± 1 % max – Input variation Vin min. to Vin max. – Load variation 5 – 100% single dual single – Load variation 0 – 100% dual – Load cross regulation 25/100% output output output output models: models: models: models: 0.2 % max. 0.5 % max. 1.0 % max. balanced load 1.0 % max. 1.0 % max. balanced load 5.0 % max. ( dual output models) 0% of rated max. load 0.1 %/K 75 mVpk-pk max. 30 ms typ. 30 ms typ. 500 µs typ. ± 0.1 %/°C continuous, automatic recovery 3.3 VDC / 5 12 VDC / 15 ±5 VDC / ±15 ±15 – Operating – Case temperature – Storage VDC VDC VDC VDC output output output output models: models: models: models: 1‘760 µF max. / 1’000 µF max. 170 µF max. / 110 µF max. ± 470 µF max. / ± 100 µF max. ± 47 µF max. – 40 °C ... + 70 °C (no derating) +100 °C max. – 55 °C ... + 125 °C 3.5 %/K above 70°C 95 % rel. H max. >2.4 Mio h @ 25°C 1’500 VDC 1000 pF max. >10 GOhm 100 kHz (PWM) – On: – Off: – Off stand by input current open or high impedance 2...4 mA current applied via 1KOhm resistor 2.5 mA max. – Input/Output – Input/Output – Input/Output (500 VDC) – Power On – Remote On 3 Watt Surge voltage (100 msec. max.) Input voltage variation ( dv/dt) Input filter Start up time Output Specifications Voltage set accuracy Regulation Minimum load Temperature coefficient Ripple and noise (20 MHz Bandwidth) Start up time ( constant resistive load) Temperature coefficient Short circuit protection Capacitive load Transient response setting time (25% load step change) General Specifications Temperature ranges Load derating Humidity (non condensing) Reliability, calculated MTBF ( MIL-HDBK-217F ground benign) Isolation voltage (60 sec) Isolation capacity Isolation resistance Switching frequency Remote On/Off All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TMR 3 Series Physical Specifications Case material Potting material Weight non-conductive plastic silicon, UL 94V-0 rated 4.8g (0.17oz) 3 Watt Application note can be downloaded under: www.tracopower.com/products/tmr3_application.pdf Outline Dimensions mm (inches) Pin-Out (0.36) Bottom view 1 2 3 5 6 7 8 0.25 (0.01) Pin  2 3 5 6 7 8 Single –Vin (GND) +Vin (Vcc) Remote On/Off No function +Vout –Vout No function Dual –Vin (GND) +Vin (Vcc) Remote On/Off No function +Vout Common –Vout 0.5 (0.02) 0.5 (0.02) 11.1 (0.44) (0.16) ±0.5 2.0 2.54 2.54 (0.1) (0.1) 5.08 (0.2) 2.54 2.54 2.54 (0.1) (0.1) (0.1) (0.08 ±0.025 ) 21.8 (0.86) Specifications can be changed any time without notice. Rev. 08/07 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com 4.0 (0.13) 3.2 9.2 Page 3 of 3