BAQ333_06

BAQ333 / 334 / 335 Vishay Semiconductors Small Signal Switching Diodes, Low Leakage Current Features • • • • • Silicon Planar Diodes Saving space e2 Hermetic sealed parts Fits onto SOD323 / SOT23 footprints Electrical data identical with the devices BAQ33...BAQ35 / BAQ133...BAQ135 • Very low reverse current • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 9612315 Applications • Protection circuits, time delay circuits, peak follower circuits, logarithmic amplifiers Mechanical Data Case: MicroMELF Glass case Weight: approx. 12 mg Cathode Band Color: Black Packaging Codes/Options: TR3 / 10 k per 13" reel (8 mm tape), 10 k/box TR / 2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part BAQ333 BAQ334 BAQ335 Type differentiation VRRM = 40 V VRRM = 70 V VRRM = 140 V Ordering code BAQ333-TR3 or BAQ333-TR BAQ334-TR3 or BAQ334-TR BAQ335-TR3 or BAQ335-TR Remarks Tape and Reel Tape and Reel Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Reverse voltage Test condition Part BAQ333 BAQ334 BAQ335 Peak forward surge current Forward continuous current tp = 1 µs Symbol VR VR VR IFSM IF Value 30 60 125 2 200 Unit V V V A mA Document Number 85538 Rev. 2.0, 07-Mar-06 www.vishay.com 1 BAQ333 / 334 / 335 Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Test condition mounted on epoxy-glass hard tissue, Fig. 1 35 µm copper clad, 0.9 mm2 copper area per electrode Junction temperature Storage temperature range Symbol RthJA RthJA Tj Tstg Value 500 500 175 - 65 to + 175 Unit K/W K/W °C °C Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Forward voltage Reverse current Test condition IF = 100 mA E ≤ 300 lx, rated VR E ≤ 300 lx, rated VR, Tj = 125 °C E ≤ 300 lx, VR = 15 V E ≤ 300 lx, VR = 30 V E ≤ 300 lx, VR = 60 V Breakdown voltage IR = 5 µA, tp/T = 0.01, tp = 0.3 ms BAQ333 BAQ334 BAQ335 BAQ333 BAQ334 BAQ335 Diode capacitance VR = 0, f = 1 MHz Part Symbol VF IR IR IR IR IR V(BR) V(BR) V(BR) CD 40 70 140 3 0.5 0.5 0.5 1 Min Typ. Max 1000 3 0.5 1 1 1 Unit mV nA µA nA nA nA V V V pF Typical Characteristics Tamb = 25 °C, unless otherwise specified 10000 V R = VRRM I R - Reverse Current (nA) 1000 Scattering Limit 100 1000 Tj = 25 °C 100 Scattering Limit 10 10 I F - Forward Current (mA) 1 1 0 94 9079 0.1 40 80 120 160 200 94 9078 0 0.4 0.8 1.2 1.6 2.0 Tj - Junction Temperature (°C) V F - Forward Voltage (V) Figure 1. Reverse Current vs. Junction Temperature Figure 2. Forward Current vs. Forward Voltage www.vishay.com 2 Document Number 85538 Rev. 2.0, 07-Mar-06 BAQ333 / 334 / 335 Vishay Semiconductors 0.71 1.3 1.27 0.152 9.9 25 0.355 10 2.5 95 10329 24 Figure 3. Board for RthJA definition (in mm) Package Dimensions in mm (Inches) 1 (0.039) surface plan 2.0 (0.079) 1.8 (0.071) 0.25 (0.010) 0.15 (0.006) 1.2 (0.047) 1.1 (0.043) > R 2.5 (R 0.098) Glass G < 1. 35 la (0. ss 05 3) Cathode indification Glass case MicroMELF ISO Method E Reflow Soldering 1.2 (0.047) 1.4 (0.055) Wave Soldering 0.8 (0.031) 0.8 (0.031) 2.4 (0.094) Document No.: 6.560-5007.01-4 Rev. 11, 07.Feb.2005 9612072 0.8 (0.031) 0.9 (0.035) 1.0 (0.039) 2.8 (0.110) Document Number 85538 Rev. 2.0, 07-Mar-06 surface plan 0.6 (0.024) 0.9 (0.035) www.vishay.com 3 BAQ333 / 334 / 335 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 4 Document Number 85538 Rev. 2.0, 07-Mar-06 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1