SL02_10

SL02, SL03, SL04 Vishay Semiconductors Small Signal Schottky Diodes Features • • • • • For surface mounted applications Low-profile package Ideal for automated placement Low power loss, high efficiency High temperature soldering: 260 °C/10 s at terminals • Wave and reflow solderable • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 17249 Mechanical Data Case: DO-219AB (SMF) Polarity: color band denotes cathode end Weight: approx. 15 mg Packaging codes/options: GS18/10 k per 13" reel (8 mm tape), 50 k/box GS08/3 k per 7" reel (8 mm tape), 30 k/box Parts Table Part SL02 SL03 SL04 Ordering code SL02-GS18 or SL02-GS08 SL03-GS18 or SL03-GS08 SL04-GS18 or SL04-GS08 Marking S2 S3 S4 Remarks Tape and reel Tape and reel Tape and reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Maximum repetitive peak reverse voltage Test condition Part SL02 SL03 SL04 SL02 Maximum RMS voltage SL03 SL04 SL02 Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave SL03 SL04 Ttp = 109 °C Symbol VRRM VRRM VRRM VRMS VRMS VRMS VDC VDC VDC IF(AV) IFSM Value 20 30 40 14 21 28 20 30 40 1.1 40 Unit V V V V V V V V V A A Document Number 85687 Rev. 1.9, 23-Jul-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 SL02, SL03, SL04 Vishay Semiconductors Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air 1) Test condition Symbol RthJA Tj Tstg Value 180 125 - 55 to 150 Unit K/W °C °C Maximum operating junction temperature Storage temperature range Note: 1) Mounted on epoxy substrate with 3 mm x 3 mm Cu pads (≥ 40 µm thick) Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Part SL02 Instaneous forward voltage IF = 0.5 A 1) Symbol VF VF VF VF VF VF IR IR IR IR IR IR Min Typ. 0.360 0.395 0.450 0.420 0.450 0.530 Max 0.385 0.43 0.51 Unit V V V V V V SL03 SL04 SL02 Typical instantaneous forward voltage IF = 1.1 A TA = 25 °C TA = 100 °C TA = 25 °C TA = 100 °C TA = 25 °C TA = 100 °C SL03 SL04 SL02 SL02 SL03 SL03 SL04 SL04 250 8 130 6 20 6 μA mA μA mA μA mA Maximum DC reverse current at rated DC blocking voltage Note: 1) Pulse test: 300 µs pulse width, 1 % duty cycle www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85687 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.9, 23-Jul-10 SL02, SL03, SL04 Vishay Semiconductors Typical Characteristics Tamb = 25 °C, unless otherwise specified 1.5 Instantaneous Reverse Current (µA) Average Forward Current (A) 10 000 Tj = 100 °C 1000 Tj = 75 °C Tj = 50 °C 100 Tj = 25 °C 10 1.0 0.5 0 0 10 17379 1 30 50 70 90 110 130 150 17382 0 5 Lead Temperature (°C) 15 20 10 Reverse Voltage (V) 25 Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Current Characteristics - SL02 250 Instantaneous Forward Current (A) 10 Tj = 100 °C Tj = 75 °C Tj = 50 °C 0.01 Tj = 25 °C 0.001 Pulse width = 300 µs 1 % duty cycle 0 17383 Junction Capacitance (pF) 200 1 150 0.1 100 SL02 50 SL04 10 0 2 8 6 4 Reverse Voltage (V) 10 12 0.0001 17380 0.8 0.6 1.0 0.4 0.2 Instantaneous Forward Voltage (V) Figure 2. Typical Junction Capacitance Figure 5. Typical Instantaneous Forward Characteristics - SL03 10 Instantaneous Reverse Current (µA) Instantaneous Forward Current (A) Tj = 100 °C Tj = 75 °C Tj = 50 °C 0.01 Tj = 25 °C 0.001 Pulse width = 300 µs 1 % duty cycle 0.0001 0 17381 10 000 Tj = 100 °C Tj = 75 °C 100 Tj = 50 °C 1 1000 0.1 10 Tj = 25 °C 1 0.1 0.8 0.2 1.0 0.4 0.6 Instantaneous Forward Voltage (V) 0 17384 5 10 15 20 25 Reverse Voltage (V) 30 35 Figure 3. Typical Instantaneous Forward Characterisics - SL02 Figure 6. Typical Reverse Current Characteristics - SL03 Document Number 85687 Rev. 1.9, 23-Jul-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 SL02, SL03, SL04 Vishay Semiconductors Package Dimensions in millimeters (inches): DO-219AB 0.85 (0.033) 0.35 (0.014) 0.25 (0.010) 0.05 (0.002) 0.1 (0.004) 5 1.9 (0.075) 1.7 (0.067) 1.2 (0.047) 0.8 (0.031) 0 (0.000) Detail Z enlarged 1.08 (0.043) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) 0.88 (0.035) Foot print recommendation: 1.3 (0.051) 1.3 (0.051) Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 17247 1.4 (0.055) 2.9 (0.114) www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number 85687 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.9, 23-Jul-10 5 SL02, SL03, SL04 Vishay Semiconductors Blistertape Dimensions for SMF in millimeters PS Document-No.: S8-V-3717.02-001 (3) 18513 Document Number 85687 Rev. 1.9, 23-Jul-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 5 DO219-AB (SMF) www.vishay.com PACKAGE DIMENSIONS in millimeters (inches) Vishay Semiconductors 0.85 (0.033) 0.35 (0.014) 0.25 (0.010) 0.05 (0.002) 0.1 (0.004) 5 1.9 (0.075) 1.7 (0.067) 1.2 (0.047) 0.8 (0.031) 0 (0.000) Detail Z enlarged 1.08 (0.043) 2.9 (0.114) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) 0.88 (0.035) Foot print recommendation: 1.3 (0.051) 1.3 (0.051) Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 17247 1.4 (0.055) 2.9 (0.114) Rev. 1.3, 27-Mar-07 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 5 Document Number: 84023 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1