UF4007

UF4001 thru UF4007 Vishay General Semiconductor Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ultrafast reverse recovery time • Low forward voltage drop • Low switching losses, high efficiency • High forward surge capability DO-204AL (DO-41) • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS IF(AV) VRRM IFSM trr VF TJ max. 1.0 A 50 V to 1000 V 30 A 50 ns, 75 ns 1.0 V, 1.7 V 150 °C For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: DO-204AL (DO-41) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 55 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range SYMBOL VRRM VRMS VDC IF(AV) UF4001 50 35 50 UF4002 100 70 100 UF4003 200 140 200 UF4004 400 280 400 1.0 UF4005 600 420 600 UF4006 800 560 800 UF4007 1000 700 1000 UNIT V V V A IFSM 30 A TJ, TSTG - 55 to + 150 °C Document Number: 88755 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 UF4001 thru UF4007 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage (1) Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time Typical junction capacitance Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle TEST CONDITIONS 1.0 A SYMBOL VF UF4001 UF4002 UF4003 UF4004 UF4005 UF4006 1.7 UF4007 UNIT V 1.0 TA = 25 °C TA = 100 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 4.0 V, 1 MHz IR 10 50 50 17 75 µA trr CJ ns pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance (1) Note: (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length SYMBOL RθJA RθJL UF4001 UF4002 UF4003 UF4004 60 15 UF4005 UF4006 UF4007 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N UF4007-E3/54 UF4007-E3/73 UNIT WEIGHT (g) 0.33 0.34 PREFERRED PACKAGE CODE 54 73 BASE QUANTITY 5500 3000 DELIVERY MODE 13" diameter paper tape and reel Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.0 30 Average Forward Rectified Current (A) Peak Forward Surge Current (A) Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 25 TA = 55 °C 8.3 ms Single Half Sine-Wave 20 0.5 15 10 5 0 20 40 60 80 100 120 140 160 0 1 10 100 Ambient Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88755 Revision: 20-Aug-07 UF4001 thru UF4007 Vishay General Semiconductor 100 100 UF4001 ~ UF4004 Instantaneous Forward Current (A) Instantaneous Reverse Leakage Current (µA) TJ = 150 °C 10 TJ = 125 °C TJ = 100 °C 1 10 TJ = 150 °C 1 TJ = 125 °C TJ = 100 °C 0.1 TJ = 25 °C 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 TJ = 25 °C 0.01 UF4005 ~ UF4007 0.001 0 20 40 60 80 100 Instantaneous Forward Voltage (V) Percent of Peak Reverse Voltage (%) Figure 3. Typical Instantaneous Forward Characteristics Figure 6. Typical Reverse Leakage Characteristics 100 TJ = 150 °C 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Instantaneous Reverse Leakage Current (µA) 10 TJ = 125 °C TJ = 100 °C 1 Junction Capacitance (pF) 10 0.1 TJ = 25 °C 0.01 UF4001 ~ UF4004 0.001 0 20 40 60 80 100 1 0.1 1 10 100 Percent of Peak Reverse Voltage (%) Reverse Voltage (V) Figure 4. Typical Reverse Leakage Characteristics Figure 7. Typical Junction Capacitance 10 Instantaneous Forward Current (A) TJ = 150 °C TJ = 125 °C 1 0.1 TJ = 25 °C TJ = 100 °C UF4005 ~ UF4007 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage (V) Figure 5. Typical Instantaneous Forward Characteristics Document Number: 88755 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 UF4001 thru UF4007 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. www.vishay.com 4 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88755 Revision: 20-Aug-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1