PS1K5S-P012

PS1K5 Series 1500 Watt Single Output PFC and Current Sharing AC/DC Switching Power Supply FEATURES ● Remote Sense ● Power Failure Signal ● Remote ON/OFF Control ● 0.98 Typical Power Factor ● Programmable Output Voltage ● Forced Current Sharing at Parallel Operation ● Input Voltage: 90~260VAC (90 ~ 170VAC Reduced Power) ● Short Circuit/ Over Load/ Over Voltage/ Over Temperature Protection SPECIFICATIONS: PS1K5 Series All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 90 ~ 260VAC **(90 ~ 170 VAC reduced power - see “Output Power vs Input Voltage” derating curve)** Input Frequency 47 to 63Hz Input Current 9.0A at 230VAC (Typical) Inrush Current Cold Start < 60A (Typical) Leakage Current < 7.0mA at 240VAC Remote ON/OFF Control Compatible with a TTL signal to turn ON/OFF OUTPUT SPECIFICATIONS Output Voltage See Table Output Power Range 1500 Watts max. Maximum - minimum > 15% Adjustment (Typical adjustment by potentiometer) Output Voltage Adjustability 25% ~ 100% Adjustment by 1 ~ 5VDC external control. Line Regulation Less than 1% Load Regulation Less than 1% Output Current See Table Ripple & Noise (peak to peak) Less than 1% or 150mV Setup, Rise, Hold-Up Time 500ms, 50ms, 12ms Temperature Coefficient ±0.04% / °C (0 ~ 50°C) Remote Sense Yes PROTECTION Over Voltage Protection 110% ~ 135% (variable “OVP” follows the adjustable DC output voltage) Over Load Protection Current limiting 3 times (1.5”, 3.0”, 5.0”) then intelligent auto recovery before shutdown. GENERAL SPECIFICATIONS Efficiency See Table Power Factor 0.98 (Typical) Power Failure Signal Open Collector of NPN Transistor Parallel Operation Yes ENVIRONMENTAL SPECIFICATIONS Working Temperature 0°C to +50°C @ 100% Load, +65°C @ 50% Load. Storage Temperature -20°C to +85°C Working Humidity 20% to 90% RH Storage Humidity 10% to 95% RH Vibration 10 ~ 200Hz, 2g 10 min./1cycle, Period of 60 min. for each axis. Cooling Power rating and temperature controlled fan. PHYSICAL SPECIFICATIONS Weight 4.5kg Dimensions 290(L) x 120(W) x 132.5(H) mm SAFETY & EMC Safety Standards UL1950, TUV EN60950 EMC Standards EN55022, EN610000-4-2,3,4,5,6,8,11, EN61000-3-2,3, ENV50204 o Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PS1K5 Series 1500 Watt Single Output PFC and Current Sharing AC/DC Switching Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Model Number PS1K5S-P009 PS1K5S-P012 PS1K5S-P015 PS1K5S-P018 PS1K5S-P024 PS1K5S-P036 PS1K5S-P048 PS1K5S-P060 Output Voltage 9 VDC 12 VDC 15 VDC 18 VDC 24 VDC 36 VDC 48 VDC 60 VDC Output Current 166.6A 125A 100A 83.3A 62.5A 41.6A 31.25A 25A Maximum Output Power 1500W 1500W 1500W 1500W 1500W 1500W 1500W 1500W Ripple & Noise 150mV 150mV 150mV 150mV 150mV 150mV 150mV 150mV Efficiency 83% 84% 85% 85% 88% 88% 89% 90% NOTES 1. Input voltage is 90 ~ 260VAC however, the unit does not reach full power until >170VAC. See derating curve below. 2. Dimensions of the mechanical drawing are shown in millimeters and inches. 3. Weight of the unit is 4500 grams. DERATING CURVES Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PS1K5 Series 1500 Watt Single Output PFC and Current Sharing AC/DC Switching Power Supply CONNECTOR PIN-OUT DRAWINGS Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PS1K5 Series 1500 Watt Single Output PFC and Current Sharing AC/DC Switching Power Supply MECHANICAL DRAWING Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797