1690020000

Product catalogue | Terminals | Tension clamp technology | Modular terminals with electronic components | 2.5 mm² | ZDK 2.5/1.5/D/1...6 diode circuit General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data Product description Additional technical data Colour of insulating material Connection direction Electronic component End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material 1690020000 ZDK 2.5/D/1 Component terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 4008190877897 50 pc(s). Soldered diode: Type 1N 4007, reverse voltage 1000V, current 1 A; current of continuous busbar = 10 A 2.5 mm² flexible conductors with wire end ferrules are crimped with the Weidmüller PZ 6/5 crimping tool. Z-series standard ranges provide solutions for conductor cross-sections from 0.05 to 35 mm². dark beige top Diode Yes Yes TS 35 Wemid No 2 2 right - 50 °C, + 120 °C Z-series Plugged Snap-on V-0 -1- Product catalogue | Terminals | Tension clamp technology | Modular terminals with electronic components | 2.5 mm² | ZDK 2.5/1.5/D/1...6 diode circuit Additional technical data Version Feed-through terminal with electronic components CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 300 V 10 A AWG 26 AWG 12 Conductors for clamping (additional connection) Type of connection Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) Tension clamp connection 0.5 mm² 2.5 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Blade size Gauge to IEC 60947-1 Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, min. AWG conductor size, max. 0.05 mm² 2.5 mm² Tension clamp connection clamped top 4 10 mm 0.6 x 3.5 mm A2 0.5 mm² 2.5 mm² 0.5 mm² 2.5 mm² 0.5 mm² 1.5 mm² 0.5 mm² 1.5 mm² 0.14 mm² 0.34 mm² AWG 30 0.13 mm² 2.5 mm² Dimensions Width Height of lowest version Length TS 35 offset 5.1 mm 54 mm 79.1 mm 39 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current 2.5 mm² 500 V 6 kV 10 A -2- Product catalogue | Terminals | Tension clamp technology | Modular terminals with electronic components | 2.5 mm² | ZDK 2.5/1.5/D/1...6 diode circuit Rating data Standards Pollution severity IEC 60947-7-1 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 300 V 10 A AWG 30 AWG 14 Approvals Approvals institutes Downloads STEP 1690020000_24218_ZDK_2.5-1.5-D-1_STP.stp Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-27 27-14-11-27 27-14-11-27 Similar products Order No. 1690030000 Part designation ZDK 2.5/D/2 1690040000 ZDK 2.5/D/4 1690050000 ZDK 2.5/D/5 1690060000 ZDK 2.5/D/6 Version Component terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 Component terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 Component terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 Component terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 -3-