7940102883

    Data sheet... OMNIMATE Signal - series LM LM 5.08/10/180 3.5SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90°, 135° and 180°. Suitable for conductor cross-sections up to 2.5 mm². • 0.13 - 2.50 mm² (IEC) / 26 - 14 AWG (UL) • 630 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 20 A (UL) General ordering data   Type Order No. Version GTIN (EAN) Qty. Product data Packaging   LM 5.08/10/180 3.5SN BK BX 9994820000 PCB terminal, 5.08 mm, No. of poles: 10, 180°, Solder pin length (l): 3.5 mm, tinned, Black, Clamping yoke connection, Clamping range, rated connection, max.: 2.5 mm², Box 4032248377978 50 pc(s). IEC: 630 V / 17.5 A / 0.2 - 2.5 mm² UL: 300 V / 15 A / AWG 24 - AWG 14 Box Creation date October 9, 2013 11:16:25 PM CEST   Catalogue status / We reserve the right to make technical changes. 1     Data sheet... OMNIMATE Signal - series LM LM 5.08/10/180 3.5SN BK BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Net weight   11.908 g     OMNIMATE Signal - series LM Solder connection 5.08 mm 10 24 1.3 mm 1 DIN 5264 0.5 Nm 6 mm   Wire connection method System characteristics   Product family Mounting onto the PCB Pitch in mm (P) No. of poles Max. adjacent poles per row Solder eyelet hole diameter (D) Number of solder pins per pole Screwdriver blade standard Tightening torque, max. Stripping length L1 in inches Touch-safe protection acc. to DIN VDE 57 106   1.8 inch Safe from finger touch   Clamping yoke connection Conductor outlet direction 180° Pitch in inches (P) 0.2 inch Fitted by customer Yes Solder pin length (l) 3.5 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Screwdriver blade 0.6 x 3.5 Tightening torque, min. 0.4 Nm Clamping screw M 2.5 L1 in mm 45.72 mm Touch-safe protection acc. to DIN VDE 0470 IP 10             Colour CTI Duration of glow-wire test Contact surface                       Material data   Insulating material UL 94 flammability rating Temperature of glow-wire test Contact material Contact base material   Wemid (PA) V-0 750 °C Cu-Leg Cu-Leg Black ≥ 600 30 s tinned Connectable conductors     Clamping range, rated connection, min. 0.2 mm²   Wire connection cross section AWG, min. AWG 24   Solid, min. H05(07) V-U 0.2 mm²   Flexible, min. H05(07) V-K 0.2 mm²   w. wire end ferrule, DIN 46228 pt 1, min 0.25 mm²   w. plastic collar ferrule, DIN 46228 pt 4, min. 0.25 mm² Plug gauge acc. to EN 60999 a x b; Ø 2.4 mm x 1.5 mm; 1.9mm     Clamping range, rated connection, max. 2.5 mm² Wire connection cross section AWG, max. AWG 14 Solid, max. H05(07) V-U 2.5 mm² Flexible, max. H05(07) V-K 1.5 mm² w. wire end ferrule, DIN 46228 pt 1, max. 1.5 mm² w. plastic collar ferrule, DIN 46228 pt 4, max. 1.5 mm²   DIN IEC rating data   Rated current, min. no. of poles (TU=20°C) Rated current, number of poles (Tu=40°C), min Rated voltage for surge voltage class pollution degree II/2 Rated voltage for surge voltage class pollution degree III/3 Rated impulse voltage for surge voltage classpollution degree III/2 Short-time withstand current resistance   17.5 A 17.5 A 630 V 250 V 4 kV 3 x 1s with 120 A             Rated current, max. no. of poles (Tu=20°C) Rated current, number of poles (Tu=40°C), max. Rated voltage for surge voltage class pollution degree III/2 Rated impulse voltage for surge voltage classpollution degree II/2 Rated impulse voltage for surge voltage classcontamination degree III/3   16 A 14.2 A 320 V 4 kV 4 kV Creation date October 9, 2013 11:16:25 PM CEST   Catalogue status / We reserve the right to make technical changes. 2     Data sheet... OMNIMATE Signal - series LM LM 5.08/10/180 3.5SN BK BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data CSA rating data   Institute (CSA) Rated current (use group B) Rated current (use group D) Wire cross-section, AWG, max.     Rated voltage (Use group B) 18 A 10 A AWG 14       Rated voltage (use group D) Wire cross-section, AWG, min.   300 V 300 V AWG 24       Rated current (use group B) Rated current (use group D) Wire cross-section, AWG, max. 15 A 10 A AWG 14 EC001284 27-26-11-01     UNSPSC eClass 7.1 30-21-18-01 27-44-04-01 300 V 300 V AWG 24 UL 1059 rating data   Rated voltage (use group B) Rated voltage (use group D) Wire cross-section, AWG, min.   Classifications   ETIM 3.0 eClass 6.2   Notes   Notes • Rated current related to rated cross-section & min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228/1 • Wire end ferrule with plastic collar to DIN 46228/4 • The data given under CSA relates to a cUL approval - E60693 • P on drawing = pitch   • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Approvals   Approvals ROHS   Conform Downloads   CAD Library (P-CAD Format - ASCII) LM.zip CAD Library (P-CAD Format - Standard) LM.zip   Creation date October 9, 2013 11:16:25 PM CEST   Catalogue status / We reserve the right to make technical changes. 3     Data sheet... OMNIMATE Signal - series LM LM 5.08/10/180 3.5SN BK BX   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date October 9, 2013 11:16:25 PM CEST   Catalogue status / We reserve the right to make technical changes. 4