GS2JA

RoHS GS2AA THRU GS2MA  COMPLIANT   Surface Mount General Purpose Rectifier Features ● Low profile package ● Ideal for automated placement ● Glass passivated chip junction ● High forward surge capability ● Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Typical Applications For use in general purpose rectification of power supplies, inverters, converters, and freewheeling diodes for consumer, and telecommunication. Mechanical Data ● Package: DO-214AC (SMA)　 Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant, halogen-free ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 ● Polarity: Cathode line denotes the cathode end ■ Maximum Ratings (Ta=25℃ Unless otherwise specified) PARAMETER SYMBOL UNIT Device marking code GS2AA GS2BA GS2DA GS2GA GS2JA GS2KA GS2MA GS2AA GS2BA GS2DA GS2GA GS2JA GS2KA GS2MA Maximum Repetitive peak reverse voltage VRRM V 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS V 35 70 140 280 420 560 700 Maximum DC Blocking Voltage VDC V 50 100 200 400 600 800 1000 Average rectified output current @60Hz sine wave, Resistance load, TL (FIG.1) IO A 2 Surge(non-repetitive)forward current @60Hz Half-sine wave,1 cycle, Ta=25℃ IFSM A 50 Storage temperature Tstg ℃ -55~+150 Junction temperature Tj ℃ -55 ~ +150 ■ Electrical Characteristics (Ta=25℃ Unless otherwise specified) PARAMETER Maximum instantaneous forward voltage drop per diode Maximum DC reverse current at rated DC blocking voltage per diode @ VRM=VRRM SYMBOL UNIT VF V IRRM TEST CONDITIONS GS2AA GS2BA GS2DA GS2GA GS2JA GS2KA GS2MA IFM=2.0A 1.15 Ta=25℃ 5 Ta=125℃ 100 μA 1/4 S-S289 Rev. 2.5, 05-Dec-19 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com GS2AA THRU GS2MA    ■ Thermal Characteristics (Ta=25℃ Unless otherwise specified) PARAMETER GS2AA GS2BA GS2DA GS2GA SYMBOL UNIT RθJ-A ℃/W 651)  RθJ-L ℃/W 201)  GS2JA GS2KA GS2MA Typical Thermal Resistance Note (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas ■ Characteristics (Typical) FIG1：Io‐TL Curve FIG2： Surge Forward Current Capability 2.4 2.0 Peak Forward Surge Current(A) Average Forward Output Current(A) 1.6 1.2 0.8 0.4 60 0 0 25 50 75 40 30 20 10 0 100 125 150 8.3ms Single Half Sine Wave 50 Single Phase Sine Wave 60Hz Resistive Load 175 1 2 5 10 20 Number of Cycles Lead Temperature(℃) FIG3：Forward Voltage 1 0.1 0.4 100 FIG4:Typical Reverse Characteristics 2 0.01 50 100 10 Instantaneous Reverse Current(uA)                             70 Instantaneous Forward Current (A)   0.6 0.8 1.0 1.2 1.4 Ta=125℃ 10 1.0 Ta=25℃ 0.1 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage(%) Instantaneous Forward Voltage (V) 2/4 S-S289 Rev. 2.5, 05-Dec-19 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com GS2AA THRU GS2MA    ■ Ordering Information (Example) PREFERED P/N PACKAGE CODE UNIT WEIGHT(g) MINIMUM PACKAGE(pcs) INNER BOX QUANTITY(pcs) OUTER CARTON QUANTITY(pcs) DELIVERY MODE GS2AA-GS2MA F1 Approximate 0.059 5000 10000 80000 13” reel GS2AA-GS2MA F2 Approximate 0.059 7500 15000 120000 13” reel GS2AA-GS2MA F3 Approximate 0.059 7500 15000 60000 13” reel GS2AA-GS2MA F4 Approximate 0.059 1800 7200 57600 7” reel GS2AA-GS2MA F5 Approximate 0.059 2000 8000 64000 7” reel GS2AA-GS2MA F6 Approximate 0.059 5000 10000 100000 13” reel ■ Outline Dimensions DO-214AC(SMA) A DO-214AC(SMA) B C D G F H Dim Min Max A 1.25 1.58 B 2.40 2.83 C 4.25 4.75 D 1.90 2.30 E 4.93 5.28 F 0.76 1.41 G 0.08 0.20 H 0.15 0.31 E Dimensions in millimeters ■ Suggested Pad Layout DO-214AC(SMA) P3 P2 Q2 Q1 Dim Millimeters P1 4.00 P2 1.50 P3 6.50 Q1  2.50 Q2  1.70 P1 Dimensions in millimeters 3/4 S-S289 Rev. 2.5, 05-Dec-19 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com GS2AA THRU GS2MA    Disclaimer The information presented in this document is for reference only. Yangzhou Yangjie Electronic Technology Co., Ltd. reserves the right to make changes without notice for the specification of the products displayed herein to improve reliability, function or design or otherwise. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Yangjie or anyone on its behalf, assumes no responsibility or liability for any damages resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http:// www.21yangjie.com , or consult your nearest Yangjie’s sales office for further assistance. 4/4 S-S289 Rev. 2.5, 05-Dec-19 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com