ZMOT0BSB0D0CG

S MOTION CONTROL AND LIGHTING SOLUTIONS Zilog’s ZMOTION™ Detection and Control Family PB022504-0112 ZMOTION™ DETECTION & CONTROL FAMILY ADVANTAGES  MCU, PIR SENSOR, AND LENS SOLUTION Zilog’s ZMOTION™ Detection and Control Family Featuring PIR Technology Superior Motion Detection Solutions Enabling Faster Development Cycles Overview  ZMOTION MCU AVAILABLE SEPARATELY TO USE WITH YOUR OWN LENS/PYRO Zilog’s ZMOTION™ Detection and Control Product Family is a series of high-performance microcontrollers with integrated motion detection algorithms combined with a selection of lenses and Passive Infrared (PIR) sensors to fit a wide range of application requirements. Optimized configuration parameters for the ZMOTION™ MCU are provided for each lens/sensor combination ensuring the best possible performance while significantly reducing development risk and minimizing time to market. Zilog’s ZMOTION™ MCU combines the programmability and rich peripheral set of the Flash-based Z8F042A Encore! XP® MCU with built-in software-based motion detection algorithms. These motion detection algorithms comprise the PIR engine and run in the background of the MCU while control and status of the engine is accessed through a software API (Application Programming Interface). Create your own application-specific software while taking advantage of Zilog’s Enhanced PIR motion-detection technology. Optimize the performance of your product by choosing a lens that closely matches your application. Use your own or select from our family of lenses spanning 360 degree ceiling, 180 degree wall mount, 25 meter long range, and 5 meter short range. API settings are provided to match the PIR engine operation to each of the lens and PIR sensor combinations provided. Zilog’s Enhanced PIR motion-detection technology provides a dramatic improvement in both sensitivity and stability over traditional designs and is scalable to many market segments including Lighting Control, HVAC, Access Control, Vending, Display, Proximity, Power Management, Occupancy Sensing, and many others.  DIRECT SENSOR INTERFACE ELIMINATES EXTERNAL COMPONENTS ZMOTION™ MCU Block Diagram  MOTION DETECTION ALGORITHMS BUILT INTO MCU  4 KB FLASH FOR APPLICATION CODE  OPTIMIZED DETECTION PERFORMANCE AND RELIABILITY  BETTER STABILITY AND SENSITIVITY THAN TRADITIONAL DESIGNS  NO TEMPERATURE COMPENSATION REQUIRED  NO NEED TO DEVELOP COMPLEX MOTION DETECTION SOFTWARE  LARGE SELECTION OF LENSES AVAILABLE WITH OPTIMIZED SETTINGS PROVIDED  REDUCED BOM COSTS  COMPLETE YOUR DESIGNS FASTER ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS ADVANCED MOTION DETECTION SOLUTIONS KEY FEATURES ZMOTION™ Detection and Control Family Feature Set  ADVANCED STATISTICALLY BASED MOTION DETECTION PROCESSING  Optimized assemblage of MCU, Lens, and PIR Sensor  4 KB FLASH FOR APPLICATION CODE  High-performance eZ8® MCU core  SUPPORTS DESIGNS REQUIRING 1 OR 2 PIR SENSORS  4 KB in-circuit programmable Flash available for application code  Single-pin debug with unlimited breakpoints  Internal precision oscillator running at 5.53 MHz  External oscillator operating up to 20 MHz  Sigma Delta ADC with up to 6 channels single ended or 3 channels differential available  On-chip analog comparator with independent programmable reference voltage  Full-duplex UART with dedicated BRG  Two 16-bit timers with input capture, output compare, and PWM capability (11 modes total)  Watchdog timer (WDT) with dedicated internal oscillator  6 to 25 I/O pins depending upon package  2.7 V to 3.6 V operating voltage with extended operating temperature range —400 C to +1050 C  Enhanced PIR software engine controlled and monitored through software API registers  Select from an assortment of lenses and pyroelectric sensors to best fit your application  Optimized API settings provided for each lens and pyroelectric sensor combination  Create your own API settings to match your own lens  Directly supports 1 or 2 pyroelectric sensors  Sensitivity control, range control, and directionality detection  Hypersense detection mode for Occupancy sensing  Low power modes  HYPERSENSE MODE FOR LIGHTING APPLICATIONS  HIGH RESOLUTION SIGMA DELTA ADC  LOW POWER MODES  API PROVIDES FULL CONTROL AND STATUS OF MOTION DETECTION ENGINE  WORLD CLASS ZDS-II DEVELOPMENT ENVIRONMENT With Zilog’s ZMOTION™ Detection and Control Solution, the system bill of materials is significantly reduced. The pyroelectric sensor is directly interfaced to the MCU eliminating external op-amps, electrolytic capacitors, and other components used in traditional designs. The new statistical processing algorithms provided by the Enhanced PIR motion-detection engine also eliminate the need for a discrete temperature compensation circuit. This all leads to a simpler and smaller circuit design, providing better reliability, sensitivity, and stability than traditional designs. 2 ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS ADVANCED MOTION DETECTION SOLUTIONS APPLICATIONS Ordering Information  LIGHTING CONTROL The ZMOTION™ Detection and Control Family is comprised of the ZMOTION™ MCU, Lens, and Pyroelectric sensor. Construct your part number based on the specific combination of MCU, Lens, and Pyroelectric sensor you wish to order. There are four fields in the part number that determine this combination. The ZMOTION™ MCU is also available separately.  ACCESS CONTROL  CUSTOMER SENSING  HVAC CONTROL Order the ZMOTION™ Detection and Control product from Zilog® using the following guide.  OCCUPANCY SENSING  VENDING APPLICATIONS  AUTOMATIC DISPLAYS  PROXIMITY Position: Field 1 2 3 4 5 Z M O T 6 MCU  POWER MANGEMENT 7 8 9 MCU Package 10 11 Lens 12 PIR 13 G Selected Options For complete ordering information, please refer to the ZMOTION™ Product Specification (PS0285). For more information about Zilog’s motion detection products, ordering or product collateral, please consult your local Zilog distributor or representative. You can find sales office locations and the most current product information on our website; please visit us at www.zilog.com. ZMOTION™ MCU Options Three MCU options provide you with the flexibility needed to optimize for size and functionality. ZMOTION™ Detection MCU Part Number Flash Memory GP I/O ADC Channels Package MCU Field MCU Package Field Z8FS040BSB20EG 4 KB 5 3 8-pin SOIC 0B SB Z8FS040BHH20EG 4 KB 16 4 20-pin SSOP 0B HH Z8FS040BHJ20EG 4 KB 22 6 28-pin SSOP 0B HJ Order the ZMOTION MCU separately using part numbers from the above table. Pyroelectric Sensor Options Choose from the three PIR Sensors available depending on your application requirements. Not all sensors are suitable for all lenses. Part Number RE200B-P SDA02-54-P SBDI46-504AA Description PIR Field Basic Dual Element 0A Premium Dual Element 0B Quad Element 0C 3 ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS ADVANCED MOTION DETECTION SOLUTIONS Lens Options A selection of matched lenses and pyroelectric sensors are available to meet a variety of applications. The Lens Field and PIR Fields columns in the table below correspond to Zilog part numbers; please see Ordering Information on the previous page. For detailed information about each lens type, refer to the ZMOTION Lens and Pyroelectric Sensor Product Specification (PS0286). Lens PIR Fields Fields Description & Part Number Typical Applications Animal Alley Array (88o) AA 0.9 GI T1 Lens Specification  35.6 mm x 49.9 mm flat Fresnel  22.9 mm focal length  25 meter range  22 equal segments Corner wall mount or very high ceiling with rectangular floor pattern  Warehouse lighting (bay light)  Large-area lighting control  HVAC Ceiling Mount Array (360o) CM 0.77 GI V3 Lens Specification  37 mm diameter circular lens  19.6 mm focal length  3.7 m radius at 2.4 m height  3:1 diameter-to-height floor coverage Ceiling mount for standard commercial heights  Lighting control  HVAC control  Meeting rooms Ceiling Mount Array (360o) CM 0.77 GI V5 Lens Specification  37 mm diameter circular lens  19.6 mm focal length  12.2 m radius at 12.2 m height  2:1 diameter-to-height floor coverage High ceiling mount for commercial and industrial applications  Commercial lighting control  Commercial HVAC control  Street lighting Ceiling/Wall Mount Array (180o) CWM 0.5 GI V1 Lens Specification  Circular lens with 24 mm x 24 mm square base  14.2 mm focal length  Board mount clip-in Wall or ceiling mount for office or meeting room lighting and HVAC control  Room lighting control  HVAC control Clip-on 15 mm Array (360o) NCL-9(26) Lens Specification  Clips on to pyroelectric sensor  2.25 m radius at 2 m height  2.1:1 diameter-to-height floor coverage Room occupancy and proximity sensing  Lighting control  HVAC control  Appliance  Kiosk/display control  Vending power management 1A 10 mm Wall Mount Array (70o) NCL-10IL Lens Specification  Clips on to pyroelectric sensor  6 beams (X); 2 beams (Y)  10 meter range Proximity sensing or entrance detection  Kiosk  Vending  HVAC  Display counters 10 mm Wall Mount Array (40o) NCL-3B Lens Specification  Clips on to pyroelectric sensor  4 beams (X); 2 beams (Y)  10 meter range Proximity sensing or entrance detection  Kiosk  Vending  HVAC  Display counters Pyro Sensor 0A RE200B-P 0B SDA02-54-P 0A RE200B-P 0C SBDI46-504AA 0A RE200B-P 0C SBDI46-504AA 0A RE200B-P 0C SBDI46-504AA 0A RE200B-P 0C SBDI46-504AA 1B 0A RE200B-P 1C 0A RE200B-P 0A 0B 0C 0D 4 ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS ADVANCED MOTION DETECTION SOLUTIONS Description & Part Number Typical Applications 10 mm Ceiling/Wall Mount Array Room occupancy and proximity sensing (360°) NCL-3R Lens Specification  Lighting control  Clips on to pyroelectric sensor  HVAC control  2:1 diameter-to-height coverage  Appliances  14 zones  Kiosk/display control  5 meter range  Vending power management 10 mm Wall Mount Array (18o) NCL-10S Lens Specification  Clips on to pyroelectric sensor o  2 beams X (27 ) o  1 beam Y (18 )  10 meter range Entrance detection with directional detection  Kiosk/display counters  Vending  HVAC  Entrance/access control Lens PIR Fields Fields Pyro Sensor 0A RE200B-P 0C SBDI46-504AA 0A RE200B-P 1D 1E Documentation For a complete listing of all available application notes, data sheets, user manuals, and sample libraries, please visit us at www.zilog.com. Document Number Description .............................................................. PS0285 ZMOTION™ Detection and Control Family Product Specification PS0286 ZMOTION™ Lens and Pyroelectric Sensor Product Specification PS0228 Z8 Encore! XP Series Product Specification WP0017 A New PIR Motion Detection Architecture White Paper UM0230 ZMOTION™ Detection & Control Development Kit User Manual QS0076 ZMOTION™ Detection & Control Development Kit Quick Start Guide 5 ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS ADVANCED MOTION DETECTION SOLUTIONS Related Products Zilog carries a number of motion detection products to suit your application requirements. For more information about the following products, please visit us at www.zilog.com. Product Name Part Number Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . ZMOTION Detection & Control Development Kit ZMOTIONL100ZCOG Development Kit for the ZMOTION Detection & Control Family ZMOTION Detection Module ZEPIR0AAS02MODG Low-profile motion detection module ZMOTION Detection Module Development Kit ZEPIR000102ZCOG Development Kit for the ZMOTION Detection Module Z8 Encore! XP F08xA Series Z8F082A Z8 Encore! XP Microcontroller 6 ZMOTION™ Detection and Control Family ADVANCED MOTION DETECTION SOLUTIONS Engineering Notes: MOTION DETECTION SOLUTIONS 7 ZMOTION™ Detection and Control Family MOTION DETECTION SOLUTIONS ADVANCED MOTION DETECTION SOLUTIONS Warning: DO NOT USE THIS PRODUCT IN LIFE SUPPORT SYSTEMS. LIFE SUPPORT POLICY ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION. As used herein Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Document Disclaimer ©2011 Zilog, Inc. All rights reserved. Information in this publication concerning the devices, applications, or technology described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. The information contained within this document has been verified according to the general principles of electrical and mechanical engineering. Z8 Encore! XP and ZMOTION are trademarks or registered trademarks of Zilog, Inc. All other product or service names are the property of their respective owners. EMBEDDED IN LIFE WWW.ZILOG.COM | 408-457-9000 Zilog and the Zilog logo are registered trademarks of Zilog, Inc. in the United States and in other countries. 8