SLT

Wind Speed Transmitter Model SLT DESCRIPTION & FEATURES The SLT converts the frequency of an anemometer signal to a 4-20 mA signal. The SLT anemometer is UV stabilized black polycarbonate. The 4-20 mA transmitter board is track mounted and powered by the milliamp loop. The wind speed range is 0-100 MPH over the 4-20 mA output. Track Mounted Transmitter ORDERING INFO PART NUMBER SLT.............................. Wind Speed Anemometer with 60’ 2 conductor cable, 10-11” long 1/2” conduit post, and 4-20 mA transmitter ACCESSORIES SDUM..............................................................................U-Mount Assembly SA2P...........................................Pole mount 2 wire Surge/Lightning Arrestor SA2W..........................................Wall mount 2 wire Surge/Lightning Arrestor SA4P...........................................Pole mount 4 wire Surge/Lightning Arrestor SA4W..........................................Wall mount 4 wire Surge/Lightning Arrestor DK191..............................................................Loop Powered Display Series DK190F...................................................................... Loop Powered Display DK807/907.......................................................Loop Powered Display Series Three Cup Anemometer PW1.0.....................................................................................Power Supply PW1.5.....................................................................................Power Supply SPECIFICATIONS PW2-24...................................................................................Power Supply Range: 0-100 MPH = 4-20 mA output Accuracy: 2-10 MPH +/- 1 MPH, 10-100 MPH +/- 5% of reading Transmitter Dimensions: Track Mount 3”W x 5.25”L x 1.5”H Anemometer Dimensions: 3.25”H x 7.5”W Anemometer Cup Diameter: 2” Shipping Weight: 2 lbs. Operating Temperature: Anemometer -40 to 60° C Transmitter 0 to 60° C Transmitter Connections: Screw terminals for 12AWG or smaller Transmitter Power: Powered by the 4-20 mA loop current Anemometer Mounting: Vertical on a 1/2” conduit or post Accessories: Surge/Lightning Arrestors U-Mount Assembly C-TON Industries BDR-924/999............................................4-20 mA Controlled Display Series CVC................................................................................ 4-20 mA Calibrator • PO Box 11746 • Memphis, TN 38111 • USA (603) 471-0158 • email: info@ctonindustries.com