OR-3120S-TA1

Shenzhen Orient Components Co ., Ltd OR-3120_OR-3150 ORIENT Photo coupler Product Data Sheet Part Number: OR-3120_OR-3150 Customer: Date: SHENZHEN ORIENT COMPONENTS CO ., LTD Block A 3rd Floor No.4 Building,Tian’an Cyber Park,Huangge Rd,LongGang Dist,Shenzhen,GD TEL：0755-29681816 FAX：0755-29681200 www.orient-opto.com Copyright© 2020 Orient .All rights Reserved 1 V14 Shenzhen Orient Components Co ., Ltd OR-3120_OR-3150 1. Features (1) 1.5A maximum peak output current for OR-3150, 3.0A maximum peak output current for OR-3120. (2) 35-kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500V (3) 1.0V maximum low level output voltage (VOL) eliminates need for negative gate drive (4) ICC = 5 mA maximum supply current (5) Under voltage lock-out protection (UVLO) with hysteresis (6) Wide operating VCC range: 15V to 35V (7) 0.2µs maximum propagation delay (8) ±0.1µs maximum delay between devices/channels (9) Industrial temperature range: –40°C to 110°C (10) Safety approval UL approved(No.E323844) VDE approved(No.40029733) CQC approved (No.CQC19001231254 ) (11) In compliance with RoHS, REACH standards (12) MSL Class Ⅰ 2. Instructions The OR-3120/OR-3150 consists of an LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate-controlled devices. 3. Application Range (1) (2) (3) (4) IGBT/MOSFET gate drive AC/Brushless DC motor drives Industrial inverters Switch mode power supplies 4. Functional Diagram Truth Table LED OFF ON ON ON Copyright© 2020 Orient .All rights Reserved VCC – VEE “POSITIVE GOING” ( TURN-ON) VCC – VEE VO VCC – VEE “NEGATIVE GOING” ( TURN-OFF) VCC – VEE VO 0 – 30 V 0 – 11.5 V 11.5 – 13.5 V 13.5 – 30 V 30 – 0 V 30 – 12.0 V 12.0 –10.0 V 10.0 – 0 V 2 LOW LOW TRANSITION HIGH LOW HIGH TRANSITION LOW V14 Shenzhen Orient Components Co ., Ltd OR-3120_OR-3150 5. Absolute Maximum Ratings (Ta=25℃)*1 Parameter Input Symbol Rated Value Unit Average Forward Input Current IF 25 mA Reverse Input Voltage VR 5 V OR-3120 “High” Peak Output Current 3.0 IOH(PEAK) Output “Low” Peak Output Current A OR-3150 1.5 OR-3120 3.0 IOL(PEAK) OR-3150 A 1.5 Output Collector Power Dissipation PO 250 mW Total Power Dissipation PT 295 mW Total Output Supply Voltage VCC - VEE 35 V Total Output Supply Voltage (90℃) VCC - VEE 30 V Insulation Voltage Viso 5000 Vrms Working Temperature Topr -40 ～+ 110 Storage Temperature Tstg -55～ + 125 *2 Soldering Temperature Tsol 260 ℃ *1. Room temperature = 25 ℃. Exceeding the maximum absolute rating can permanently damage the device. Working long hours at the maximum absolute rating can affect reliability. *2. soldering time is 10 seconds. 6. Recommended Operating Conditions Parameter Symbol Min Max Unit Power Supply TA VCC-VEE Input Current IF(ON) -40 15 7 0 110 30 16 0.8 ℃ V mA V Operating Temperature Input Voltage(OFF) Copyright© 2020 Orient .All rights Reserved VF(OFF) 3 V14 Shenzhen Orient Components Co ., Ltd OR-3120_OR-3150 7. Opto-electronic Characteristics Parameter High Level Output Current Low Level Output Current Symbol OR-3120 IOH OR-3150 OR-3120 IOL OR-3150 High Level Output Voltage VOH Low Level Output Voltage VOL OR-3120 OR-3150 Min. Typ. Max. 1.0 2.0 2.5 VO = (VCC – 3V) 2.0 — 2.5 VO = (VCC – 6V) 0.2 — — 1.0 — — VO = (VCC – 4V) 1.0 2.0 2.5 VO = (VEE + 3V) 2.0 — 2.5 VO = (VEE + 6V) 0.2 — — 1.0 — — (VCC – 0.3) (VCC– 0.1) — — 0.1 0.25 — 0.4 1.0 Units A A Test Conditions VO = (VCC – 0.75V) VO = (VEE + 0.75V) VO = (VEE + 4V) V V IO = –100 mA IO = 100 mA High Level Supply Current ICCH — 1.6 3.0 mA Output Open, IF = 7 to 16 mA Low Level Supply Current ICCL — 2.0 3.0 mA Output Open,VF = –3.0 to +0.8V Threshold Input Current Low to High IFLH — 3.0 5.0 mA IO = 0 mA,VO ＞ 5V Threshold Input Voltage High to Low VFHL 0.8 — — V IO = 0 mA,VO ＜ 5V VF 1.2 1.5 1.8 V IF = 10 mA ΔVF/ΔTA — –1.6 — mV/°C IF = 10 mA BVR 5 — — V IR = 10 µA CIN — 70 — pF f = 1 MHz, VF = 0V VUVLO+ 11.5 12.7 13.5 VUVLO- 10.0 11.2 12.0 V VO > 5 V IF = 10 mA UVLOHYS — 1.5 — Riso 5×1010 1×10 12 --- Ω DC500V, 40~60%R.H. Input Forward Voltage Temperature Coefficient of Forward Voltage Input Reverse Breakdown Voltage Input Capacitance UVLO Threshold UVLO Hysteresis Insulation Impedance 1. All typical values at TA = 25°C and VCC – VEE = 30V, unless otherwise noted. 2. Maximum pulse width = 10 µs, maximum duty cycle = 0.2%. This value is intended to allow for component tolerances for designs with IO peak minimum = 0.5 A. See Applications section for additional details on limiting IOH peak. 3. Maximum pulse width = 50 µs, maximum duty cycle = 0.5%. 4. In this test, VOH is measured with a dc load current. When driving capacitive loads VOH will approach VCC as IOH approaches zero amps. 5. Maximum pulse width = 1 ms, maximum duty cycle = 20%. Copyright© 2020 Orient .All rights Reserved 4 V14 Shenzhen Orient Components Co ., Ltd OR-3120_OR-3150 8. Switching Characteristics Parameter Symbol Min. Typ Max. Units Propagation Delay Time to High Output Level Propagation Delay Time to Low Output Level tPLH 0.05 0.11 0.20 μs tPHL 0.05 0.11 0.20 μs Pulse Width Distortion PWD — 0.005 0.06 μs PDD (tPHL – tPLH) –0.1 — 0.1 μs Rise Time tr — 0.1 — μs Fall Time tf — 0.1 — μs UVLO Turn On Delay tUVLO ON — 0.9 — UVLO Turn Off Delay tUVLO OFF — 0.8 — Output High Level Common Mode Transient Immunity |CMH| 35 50 — kV/μs Output Low Level Common Mode Transient Immunity |CML| 35 50 — kV/μs Propagation Delay Difference Between Any Two Parts 1. 2. 3. 4. 5. 6. 7. μs Test Conditions OR-3120: Rg=10 ,Cg=10nF, f=10kHz, Duty Cycle=50% OR-3150: Rg=47Ω,Cg=3nF, f=10kHz, Duty Cycle = 50% VO>5V,IF=10mA VO15.0V). Common mode transient immunity in a low state is the maximum tolerable dVCM/dt of the common mode pulse, VCM, to assure that the output will remain in a low state (i.e., VO