DF1EC-8P-2.5DSA(35)

APPLICABLE STANDARD OPERATING TEMPERATURE RANGE Oct.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved. In case of consideration for using Automotive equipment / device which demand high reliability, kindly contact our sales window correspondents. RATING STORAGE TEMPERATURE RANGE APPLICABLE CONNECTOR -35 C TO +85 C(NOTES 1) 250 VOLTAGE V AC AWG20 TO 24: 3A AWG26: 2A AWG28: 1A AWG30: 0.5A CURRENT -10 C TO +60 C(NOTE2) DF1E-＊S-2.5C VOLTAGE AC 30V AWG20 TO 22: 3A AWG24 TO 28: 1A AWG30: 0.5A UL,CSA CURRENT SPECIFICATIONS ITEM TEST METHOD REQUIREMENTS QT AT X X X X X － X － X － X － X － X － X － X － NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. X － SOLDER SHALL COVER A MINIMUM OF 95  OF THE SURFACE BEING IMMERSED. X － CONSTRUCTION GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT. MARKING ACCORDING TO DRAWING. CONFIRMED VISUALLY. ELECTRIC CHARACTERISTICS CONTACT RESISTANCE 20 mV MAX, 1 mA(DC OR MILLIVOLT LEVEL METHOD. INSULATION 500 V DC. RESISTANCE VOLTAGE PROOF 650 V AC FOR 1 min. 1000 Hz). 30 m MAX. 1000 M MIN. NO FLASHOVER OR BREAKDOWN. MECHANICAL CHARACTERISTICS ① CONTACT RESISTANCE: 30 m MAX. ② NO DAMAGE, CRACK OR LOOSENESS OF PARTS. MECHANICAL OPERATION 30 TIMES INSERTIONS AND EXTRACTIONS. VIBRATION ① NO ELECTRICAL DISCONTINUITY OF 1 s. FREQUENCY 10 TO 55 Hz, SINGLE AMPLITUDE ② NO DAMAGE, CRACK OR LOOSENESS OF 0.75 mm, AT 2 h, FOR 3 DIRECTIONS. 2 PARTS. 490 m/s DURATION OF PULSE 11 ms AT 3 TIMES FOR 3 DIRECTIONS. SHOCK ENVIRONMENTAL CHARACTERISTICS RAPID CHANGE OF TEMPERATURE TEMPERATURE -55→ 5 TO 35→+85→ 5 TO 35 C ① CONTACT RESISTANCE: 30 m MAX. TIME 30→ 5 MAX→ 30→ 5 MAX min ② INSULATION RESISTANCE: 1000 M MIN. ③ NO DAMAGE, CRACK OR LOOSENESS OF UNDER 5 CYCLES. DAMP HEAT (STEADY STATE) EXPOSED AT 40 ± 2 C, 90 TO 95 , 96 h. RESISTANCE TO SOLDERING HEAT 1) AUTOMATIC SOLDERING （FLOW） SOLDER TEMPERATURE, 260 ℃ FOR IMMERSION,DURATION, 10 sec. 2) MANUAL SOLDERING SOLDERING IRON TEMPERATURE : 300 ℃, SOLDERING TIME : 3 sec. NO STRENGTH ON CONTACT. SOLDERED AT SOLDER TEMPERATURE, 235 C FOR IMMERSING DURATION, 5 s. PARTS. SOLDERABILITY △ COUNT DESCRIPTION OF REVISIONS ① CONTACT RESISTANCE: 30 m MAX. ② INSULATION RESISTANCE: 500 M MIN. ③ NO DAMAGE, CRACK OR LOOSENESS OF PARTS. DESIGNED CHECKED DATE 0 REMARKS TO NOTE1: INCLUDE THE TEMPERATURE RISING BY CURRENT. NOTE2:NO CONDENSING. NOTE3:APPLY TO THE CONDITION OF LONG TERM STORAGE FOR UNUSED PRODUCTS BEFORE PCB ON BOARD,AFTER PCB BOARD,OPERATING TEMPERATURE AND HUMIDITY RANGE IS APPLIED FOR INTERIM STORAGE DURING TRANSPORTATION. APPROVED KI.AKIYAMA 15.05.23 CHECKED TS.FUKUSHIMA 15.05.23 DESIGNED TS.KUMAZAWA 15.05.23 DRAWN MI.SAKIMURA 15.05.23 Unless otherwise specified, refer to IEC 60512. Note QT:Qualification Test FORM HD0011-2-1 AT:Assurance Test X:Applicable Test DRAWING NO. SPECIFICATION SHEET PART NO. HIROSE ELECTRIC CO., LTD. CODE NO. ELC-161943-35-00 DF1EC-*P-2.5DSA(35) CL541 0 △ 1/1