SCP30T515DN

Power Supplies SCP Series, 30 Watt; Single, Dual and Triple Selection Table E137632 The SolaHD SCP switchers are compact, rugged power supplies designed to power many of your industrial control and instrumentation devices and equipment, with high reliability and tight regulation through the most difficult factory floor conditions around the globe. “User friendly” applies to these unique power supplies that feature easy-to-install DIN rail and chassis mounting. Terminations are also easy to access (AC and DC terminations are well separated) and simple to wire. Safety is another aspect where the SCP distinguishes itself. The encapsulated design meets IP20 specifications, and the wide range of voltages will reliably support almost any low power device in your cabinet or system for years to come. Features • International approvals for global use • DIN Rail or Chassis Mount • Rugged, encapsulated design to resist environment • IP20 protection • Many output voltages, 3.3-48 Volts; single, dual, triple • Five year limited warranty Output Voltages Low Profile Catalog Number Description Vdc A Vdc A Vdc A Min Load V1 A SCP 30S3.3-DN 3.3 V 3.3 6.0 - - - - 0 ≥ 62 SCP 30S5-DN 5V 5 6.0 - - - - 0 ≥ 70 SCP 30S12-DN 12 V 12 2.5 - - - - 0 ≥ 75 SCP 30S15-DN 15 V 15 2.0 - - - - 0 ≥ 75 SCP 30S24-DN 24 V 24 1.3 - - - - 0 ≥ 77 SCP 30S48-DN 48 V 48 0.6 - - - - 0 ≥ 77 SCP 30D12-DN Dual O/P +/- 12 V 12 1.2 -12 1.2 - - 0.12 ≥ 68 SCP 30D15-DN Dual O/P +/- 15 V V1 V2 V3 Efficiency % 15 1.0 -15 1.0 - - 0.15 ≥ 68 SCP 30D512-DN Dual O/P 5 V & 12 V 5 3.0 12 1.2 - - 0.3 ≥ 68 SCP 30D524-DN Dual O/P 5 V & 24 V 5 3.0 24 0.6 - - 0.3 ≥ 68 SCP 30T512-DN Triple O/P 5/12/12 V 5 3.0 -12 0.6 12 0.6 0.3 ≥ 68 SCP 30T515-DN Triple O/P 5/15/15 V 5 3.0 -15 0.5 15 0.5 0.3 ≥ 68 Please order using the following model number suffixes: -DN: Low Profile – DIN Rail or Chassis Mount (ie: SCP30S3.3-DN). B-DN: Slim Line – DIN Rail Mount Availability Only (ie: SCP30S3.3B-DN). Note: Slim line version not available on SCP30D512-DN Options and Accessories • SCP-MDC – Pair of metal DIN clips • SCP-PDC – 1 plastic DIN clip with lever for removal from rail Certifications and Compliances • • UL Recognized Component, ITE, E137632 UL 60950 E137632 CUL/CSA-C22.2 No. 234-M90 - IEC/EN 60950-1, 2nd Edition • IP20 • RoHS Compliant Packaging and Mounting Specifications • Simple snap-on for DIN Rail TS35/7.5 or TS35/15 • M3 screw clamp terminations • Chassis mounting possible on -DN Low Profile versions by removing DIN clips (simply unscrew at the back of the unit). Visit our website at www.emerson.com or contact Technical Services at (800) 377-4384 with any questions. © December 2018 149 Power Supplies Specifications Low Profile DIN Rail (-DN) or Chassis Mount * Condition Value AC Input Voltage Input — 85 - 264 Vac DC Input Voltage — 100 - 375 Vdc Input Frequency — 50/60 HZ Filtering EMI/RFI — EN 55011/B, 55022/B Switching Frequency — Typ. 100 kHz Input Fusing Required — Use 2.0 A Slow Fuse D = .16 (4.2) 2 1 ≤1%, Vout Noise Vin=min, Iout=max, 25°C ≤2%, Vout Line Regulation Vin=min/max 25°C Iout = max, 25°C ≤+0.5%, Vout Load Regulation Iout = 10 to 90 to 10%, 25°C Vin = 230 Vac, 25°C ≤+0.5%, Vout Overcurrent Protection — 105 to 130% Inom Load Regulation Timing 10 to 90 to 10%, 25°C 50 ms 2.08 (53.0) 2.55 (65.0) * Unscrew DIN connector for chassis mounting. -25 to +65°C Tamb = 25°C 45 to +85°C — 45 K max Slim Line DIN Rail Mount only (B-DN) 1 2 3 4 5 acc. MIL-HDBK-217F 800,000 hrs — EN61000-4-2, 3, 4, 5 — Convection 0.7 (.34) 0.8 (.38) Case Material/Potting — UL94-VO Protection — IP20 Visual Indicators — Green LED indicates DC OK for B-DN Slim Line versions only Weight - lbs (kg) .24 (6.0) Front View Side View 4.00 (102.0) Storage Temperature 1.29 (33.0) Tamb >50°C Operating Temperature 7 4.43 (113.0) Holdup Time 6 3.53 (90.0) Derating Single/Dual/Triple Front View Continuous Overload/Short Circuit 4.16 (106.0) Ripple 2.26 (57.5) V1 ≤ ±1%, V2/3 ≤ ±3% Vin=min, Iout=max, 25°C Side View Output Vin = 230 V, Iout = max, 25°C Output Voltage Accuracy 4.71 (120.0) 5 4 3 4.51 (115.0) Parameter Dimensional Diagram – in (mm) 6 7 Dimensions (H x W x D) • Low Profile “-DN” 4.72 x 2.55 x 1.29 in (120.0 x 65.0 x 33.0 mm) (Takes up 2.55 in or 65.0 mm on DIN rail) • Slim Line “B-DN” 4.72 x 1.29 x 2.68 in (120.0 x 33.0 x 68.0 mm) (Takes up 1.29 in or 33.0 mm on DIN rail) 2.67 (68.0) Pin-Out SCP 30 1 2 3 4 5 6 7 RETURN +V1 IN IN -V2 COM +V1 IN IN COM (V1) +V1 COM V3 +V3 IN IN COM (V1) COM (V2/3) +V1 +V3 IN IN Single Dual sym Dual asym Triple 150 1.37 (35.0) -V2 Visit our website at www.emerson.com or contact Technical Services at (800) 377-4384 with any questions. © December 2018