ESD0801PB

ESD0801PB TVS/ESD Protection Diodes DFN1006 Plastic-Encapsulate ESD Protection Diodes DESCRIPTION ESD0801PB is a low-capacitance Transient Voltage Suppressor (TVS) designed to provide electrostatic discharge (ESD) protection for data, control or power lines. With maximum capacitance of 15pF, ESD0801PB is designed to protect parasitic-sensitive systems against over-voltage and over-current transient events. It complies with IEC 61000-4-2 (ESD), Level 4 (±15kV air, ±8kV contact discharge), IEC 61000-4-4 (electrical fast transient - EFT) (40A, 5/50 ns), very fast charged device model (CDM) ESD and cable discharge event (CDE), etc. ESD0801PB uses ultra-small DFN1006 package. Each ESD0801PB device can protect one data line. It offers system designers flexibility to protect single data line where space is a premium concern. Features          Transient protection for high-speed data lines IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns) Cable Discharge Event (CDE) Package optimized for hingh-speed lines Low clamping voltage Low Capacitance Low leakage current Each I/O pin can withstand over 1000 ESD strikes for ±8kV contact discharge Applications       Pin Configuration Portable Electronics Desktops, Servers and Notebooks Cellular Phones MP3 Ports Subscriber Identity Module (SIM) card Digital Ports Circuit Diagram Mechanical Characteristics Package: DFN1006 Flammability Rating: UL 94V-0 Packaging: Tape and Reel High temperature soldering guaranted: 260℃/10s  Marking: PB  MSL3     Absolute Maximum Ratings (TA=25°C unless otherwise specified) Parameter ESD per IEC 61000−4−2 (Air) ESD per IEC 61000−4−2 (Contact) Symbol VESD Peak Pulse Power(tp=8/20us waveform) PPP Operating Temperature Storage Temperature Range Lead Solder Temperature – Maximum (10 Second Duration) Value ± 30 ± 30 Unit kV 68 W TJ −55 to +125 °C TSTG −55 to +150 °C TL 260(10 sec.) °C The above data are for reference only. DN:T20226A0 http://www.microdiode.com Rev:2020A0 Page :1 ESD0801PB TVS/ESD Protection Diodes Electrical Characteristics (TA=25°C unless otherwise specified) Symbol bol Param VRWM Reverse Working Voltage VBR Reverse Breakdown Voltage Test Condition IT = 1mA Min Typ Max Units 5.0 V 6 V IR Reverse Leakage Current VRWM = 5V 1 uA IPP Peak Pulse Current tP = 8/20us 4 A IPP = 1A, tp = 8/20μs 9.5 V IPP = 4A, tp = 8/20μs 17 V 15 pF VC Clamping Voltage CJ Junction Capacitance VR = 0V, f = 1MHz 8 The above data are for reference only. http://www.microdiode.com Rev:2020A0 Page :2 ESD0801PB TVS/ESD Protection Diodes ELECTRICAL CHARACTERISTICS CURVE The above data are for reference only. http://www.microdiode.com Rev:2020A0 Page :3 ESD0801PB TVS/ESD Protection Diodes Outlitne Drawing DFN1006 Package Outline Dimensions A DFN1006 Dim Min Max Typ A 0.50 0.45 0.55 b 0.45 0.55 0.50 D 1.05 0.95 1.00 E 0.60 0.55 0.65 e 0.40 L 0.20 0.30 0.25 R 0.07 0.17 0.12 All Dimensions in mm D R E b e L Suggested Pad Layout X1 Dimensions C G X X1 Y X Y Value (in mm) 0.90 0.40 0.50 1.10 0.50 Note: 1.Controlling dimension:in/millimeters. 2.General tolerance: ±0.05mm. 3.The pad layout is for reference purposes only. G C PACKAGE SPECIFICATIONS Package Reel Size DFN1006 Reel DIA. (mm) Q'TY/Reel (pcs) Box Size (mm) QTY/Box (pcs) Carton Size (mm) Q'TY/Carton (pcs) 178 10,000 210×210×205 100,000 445×445×230 400,000 7' Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). http://www.microdiode.com Rev:2020A0 Page :4