®
IzoT
TM
FT 6000 EVK
Evaluation and Development Kit for LONWORKS® and IzoT Platforms
The FT 6000 EVK is a complete hardware
and software platform for creating or
evaluating LONWORKS and IzoT devices
based on the Series 6000 Smart
Transceivers and Neuron® Processors.
FT 6000 EVK Key Features
• Supports the development of
LONWORKS, LONWORKS /IP or BACnet/
IP devices on a common platform
• Includes two FT 6000 EVB hardware
platforms for initial application
development and testing
• Includes sample I/O hardware with a
4x20 character LCD display for easy
I/O prototyping and testing.
• Includes the IzoT NodeBuilder software
for application development and IzoT
Commissioning Tool EVK Edition for
easy installation and testing of control
networks
• Includes one IzoT Router with FT and
Ethernet interfaces and a set of five
FT 6050 Smart Transceiver chips
• Open source Wireshark network
protocol analyzer can be used to
capture, analyze, characterize, and
display network packets so you can
pinpoint network or device faults and
identify potential solutions.
You can use the FT 6000 EVK to
create devices such as VAV controllers,
thermostats, card-access readers,
lighting ballasts, motor controls and many
other devices. These devices can be used
in a variety of systems including building
and lighting controls, factory automation,
energy management, and transportation
systems. Whether you’re building large
or small control network devices, IP
enabled LONWORKS or BACnet devices,
the FT 6000 EVK makes your project
development faster, easier, and more
affordable.
Development Kit for the IzoT
Control Platform
Creating control devices and networking
them has a unique set of challenges that
are quite different from traditional data
or computer networking and also quite
different from the consumer Internet of
Things (IoT). Most high value assets such
as electro-mechanical systems within
buildings, machines on factory floors,
public transportation, infrastructure for
the delivery of public utilities and many
others, require controlling and monitoring
by special devices that are attached at
key control and monitoring points and
these devices together from the Industrial
Internet of Things (IIoT). The control and
communication of these devices requires:
• autonomous control — without the
need for human involvement
• industrial strength reliability
• co-existence with legacy control
protocols and evolution to new IP
based addressing
• hardened security
The FT 6000 EVK is the easiest way for
developers to create control devices and
connect them with control networks. The
FT 6000 EVK facilitates:
• creation of autonomous communities
of devices
• the ability discover each other
• a rich set of standard and interoperable device profiles
• creation of meaningful and functional
bindings between devices
• secure group messaging between
devices
• IP addressing down to the device level
• an easy to use programming
environment
IzoT NodeBuilder Software
The IzoT NodeBuilder software lets
you create, debug, test, and maintain
applications for LONWORKS or IzoT devices
based on an Echelon Series 6000 Neuron
Processor or Smart Transceiver. Using the
www.echelon.com
“IzoT Platform-in-a-box”: The FT 6000 EVK
(5) FT 6000 Smart
Transceivers
(Sample Pack)
78 kbps- Free Topology
Twisted Pair
Network Cable
Ethernet Cable
IzoT Router
(= IzoT Server + Terminator)
(2) FT 6000 EVB
Evaluation
Boards
IzoT NodeBuilder software, you write your device applications
using the Neuron C programming language, a high-level
language based on ANSI C with extensions to simplify network
communication, hardware I/O, and event-driven processing.
The Neuron C language supports up to 254 address table
entries, 254 static network variables and 127 network variable
aliases per device for devices based on a Series 6000 chip
with Neuron Firmware version 21 or newer, subject to available
memory.
The IzoT NodeBuilder software supports application-specific
interrupt handlers and a hardware semaphore that can be
used for interrupt task synchronization. Interrupt sources
include signals on any of the 12 I/O pins (rising edge, falling
edge, either edge, positive or negative level), the highperformance on-chip timer and counter units, and a dedicated,
configurable, high-performance periodic system timer.
The IzoT NodeBuilder software includes the following
tools:
IzoT NodeBuilder Resource Editor. View standard types and
functional profiles, and create user-defined types and profiles
if the standard resource files don’t include the resources you
need.
IzoT NodeBuilder Code Wizard. Use a drag-and-drop interface
to create your device’s interface, and then automatically
generate Neuron C source code that implements the
device interface and creates the framework for your device
application. The code wizard saves days of development for
every new device.
IzoT NodeBuilder Editor. Edit the Neuron C source code
generated by the code wizard to create your device’s
application.
IzoT NodeBuilder S/W
IzoT Commissioning
Tool/EVK Edition S/W
WireShark IP Protocol
Anayzer S/W
IzoT NodeBuilder Debugger. Debug your application with a
source-level view of your application code as it executes.
IzoT NodeBuilder Project Manager. Build and download your
application image to your development platform or to your own
device hardware.
ISI Developer’s Kit. Develop ISI devices that use the
Interoperable Self-Installation (ISI) protocol to install and
organize themselves into networks automatically or at the
push of a button, all without the use of a separate installation
tool.
IzoT Commission Tool EVK Edition
An integral part of the IzoT NodeBuilder software, the IzoT
Commissioning tool is a software package for designing,
installing, and maintaining LONWORKS and IzoT control
networks. This single tool manages all phases of a network’s
life cycle, from the initial design and commissioning to the
ongoing operation. Based on Echelon’s IzoT Network Services
Server, the IzoT Commissioning tool combines a powerful
client-server architecture with an easy- to-use Microsoft Visio
user interface. It is compatible with a number of IzoT and LNS®
plug-ins, including the IzoT NodeBuilder Project Manager.
FT 6000 Evaluation Board (EVB)
Two FT 6000 EVB Evaluation Boards are included with the
FT 6000 EVK. The FT 6000 EVB is a complete Series 6000
LONWORKS and IzoT device that you can use to evaluate and
create LONWORKS and IzoT devices. The FT 6000 EVB includes
an FT 6000 Smart Transceiver with an external 10MHz crystal
(you can adjust the internal system clock speed from 5MHz to
80MHz), an FT-X3 communication transformer, 512KB external
serial flash memory device, and a 3.3V power source.
FT 6000 EVB Evaluation Board
Edgelog input
The FT 6000 EVB’s compact design includes the following
I/O devices, which you can use to develop prototype and
production devices, and to test the FT 6000 EVB example
applications:
Frequency output
• 4-line x 20-character LCD display
• 4-way joystick with center push button
• Two push-button inputs
• Two LED outputs
• Light-level sensor
• Temperature sensor
An FT 6000 EVB I/O library, included with the IzoT NodeBuilder
software, provides easy-to-use high-level functions for
accessing the display, light-level sensor, and temperature
sensor.
The FT 6000 EVB Evaluation Board also includes an EIA-232/
TIA-232/RS-232 interface and a USB interface that you can
use to connect the board to your development computer and
perform application-level debugging (only one of the two serial
interfaces can be used at a time).
Each FT 6000 EVB also features a connector for optional
in-circuit programming of the external non-volatile memory of
the FT 6000 Smart Transceiver on the board. This allows fast
application downloads to the external non-volatile memory.
IzoT Router with FT and Ethernet Interfaces
One IzoT router is included with the FT 6000 EVK. The IzoT
router includes the IzoT ServerStack and the FT terminators.
The IzoT router supports FT and Ethernet interfaces and can
be used to connect the FT 6000 EVBs to a host that is running
the IzoT NodeBuilder software and the IzoT Commissioning
Tool.
Infrared input
Infrared pattern output
I2C input/output
Level detect input
Magcard bitstream input
Magcard track 1 and 2 input
(for ISO 7811 input)
Muxbus input/output
(multiplexed address/data)
Neurowire input/output
(National Semiconductor Microwire
and Motorola SPI compatible)
Oneshot output, ontime input,
period input, pulsewidth output
Parallel input/output
Pulsecount input/output
Quadrature input
SCI (UART) serial input/output*.
SPI serial input/output*.
Serial input/output.
Total count input.
Touch input/output
(Maxim/Dallas 1-Wire® protocol-compatible)
Triac and stretched triac** output
Specifications
Triggeredcount output
Operating System
Wiegand input
Microsoft Windows 8 64-bit and 32-bit or Windows 7 64-bit
and 32-bit or Windows XP 32-bit.
Neuron C Network
Minimum Hardware
Functional blocks
Intel Pentium® III 1.3GHz processor; 2GB RAM for Windows
Vista, 512MB RAM for Windows XP; CD-ROM drive; mouse or
other Windows-compatible pointing device; 300 to 550 MB
free hard-disk space.
Network variables
Neuron C I/O Objects
FT 6000 EVB
Bit, byte, nibble input/output
Processor
Bitshift input/output
FT 6000 Smart Transceiver.
Dallas Touch input/output
Processor Input Clock
Dual slope input
10MHz (5MHz to 80MHz system clock).
(for low-cost A/D)
Edge divide output
Communication Extensions
Configuration properties
Application and foreign-frame messages
Processor Memory
IzoT BACnet Developer’s Guide
64KB on-chip RAM, 16KB on-chip ROM, 512KB external serial
flash memory, mapped to 64KB Neuron memory space based
on IzoT NodeBuilder hardware template definition.
078-0507-01
Operating Input Voltage
IzoT Resource Editor’s Guide
078-0508-01A
+9 to 12VDC unregulated.
External I/O Power
Combined +5V and +3.3V current not to exceed 100mA.
External Power Supply
Describes how to use the BACNet library and run the BACnet
examples for the 6000 EVK.
Describes resource files and how to use the IzoT Resource
Editor to view, create, and modify them.
IzoT Commissioning Tool User’s Guide
078-0509-01A
100 to 240VAC; 50 or 60Hz.
Describes how to use the this tool to design, install, operate,
and maintain IzoT networks.
Operating Temperature
0 to +45°C
IzoT Network XML Programmer’s Guide
Non-operating Temperature
078-0510-01A
-20 to +70°C
Dimensions
This guide describes how to create and modify an IzoT network
using the XML Plug-in.
140mm x 105mm x 30mm
IzoT Plug-in Guide for WireShark
EMC Compliance
078-0511-01A
EN 55022 Class A.
How to plug into the WireShark packet analyzer to monitor,
analyze, and troubleshoot network protocol problems.
Documentation
I/O Model Reference for Smart Transceivers and Neuron Chips
Series 6000 EVK User’s Guide
078-0392-01C
078-0503-01A
Describes the many different I/O models that are available for
use with Smart Transceivers and Neuron Chips. An I/O model
provides programmable access to one or more I/O pins.
Describes how to use the FT 6000 EVK Evaluation and
Development Kit to develop control applications and networks
using the IzoT platform.
Neuron Assembly Language Reference Guide
FT 6000 EVB Hardware Guide 078-0504-01A
078-0399-01B
Describes how to connect the FT 6000 EVB boards, and it
describes the Neuron core, I/O devices, service pin, reset
buttons, LEDs, and jumper settings on the FT 6000 EVB
hardware.
Describes the Neuron Assembly Language and how to write
assembly language functions.
FT 6000 Examples Guide
Neuron C Programmer’s Guide
078-0002-02I
078-0505-01A
Describes how to write programs using the Neuron C
programming language.
Describes how to run the example applications included with
the Evaluation Kit on an FT 6000 EVB.
Neuron C Reference Guide
Series 6000 Chip Data Book
Provides reference info for writing programs using the Neuron C
programming language.
005-0230-01A
Provides detailed specifications on the electrical interfaces,
mechanical interfaces, and operating environment
characteristics for the FT 6000 Smart Transceiver and Neuron
6000 Processor.
IzoT Router Quick Start Guide
Neuron Tools Errors Guide
078-0402-01D
Documents and explains the various warning and error
messages that can occur in the Echelon development tools.
Ordering Information
078-0506-01A
A quick guide for connecting the Izot Router.
®
078-0140-02G
IzoT FT 6000 EVK: Evaluation and Development Kit
10070R-43-54
© 2014 Echelon, LonWorks, and the Echelon logo are trademarks of Echelon Corporation registered in the United States and other countries.
IzoT is a trademark of Echelon Corporation. Content subject to change without notice.