SEN0160

    Weight Sensor Module SKU:SEN0160 Contents     1 Introduction 2 Specification 2.1 24-Bit Analog-to-Digital Converter for Weight Scales (HX711) 2.2 Weight Sensor Module 3 Tutorial 3.1 Hardware Requirement 3.1.1 Connection Diagram 3.2 Software Requirement 3.3 Detail Steps 4 The structure of the weight sensor Introduction Weight Sensor Module is based on HX711,which is a precision 24-bit analog-to-digital convertor designed for weigh scale and industrial control applications to interface directly with a bridge sensor.Compared with other chips, HX711 not only has a few basic function,also contains high integration,fast response,immunity,and other features.The chip lowedrs the cost of the electronic scale,at the same time,improving the performance and reliability. The input interface of this weight sensor module is used sensor interface,which is compatible with Arduino I/O port.The output adopts compact terminal that makes weight sensor module easier to connect the weight sensor.It's the best choose for electronic enthusiast to do some tiny home scale. The weight sensor module can be combined with weight sensor on the market. We also help you to pick a small range of weight sensor. Specification 24‐Bit Analog‐to‐Digital Converter for Weight Scales (HX711)             Two selectable differential input channels On-chip active low noise PGA with selectable gain of 32,64 and 128 On-chip power supply regulator for load-cell and ADC analog power supply On-chip oscillator requiring no external component with optional external crystal On-chip power-on-rest Simple digital control and serial interface: pin-driven controls, no programming needed Selectable 10SPS or 80SPS output data rate Simultaneous 50 and 60Hz supply rejection Supply Voltage: 2.6V~5.5V Current: