DZN-2R5D107T

DZN ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP” GREEN CAP High power type Capacitors 70˚C Low ESR • Low internal resistance allows boosting charge and heavy-current discharge. (ampere level) • Pollution-Free ; with no pollutants such as Cd or Pb. High power • Unlimited number of charges and discharges. DZN DZ Marking color : White print on a blue sleeve Specifications Item Performance Category temperature range (˚C) −25 to +70 Tolerance at rated capacitance (%) −20 to +80 Internal resistance Rated Capacitance (F) 0.7 1.0 3.3 4.7 10 20 50 100 at 1 kHz Internal resistance (Ω) 0.4 0.3 0.2 0.10 0.10 0.10 0.03 0.03 Characteristics at high Percentage of capacitance change and low temperature Internal resistance Endurance (70˚C) Percentage of capacitance change Within ±30% of value at 20˚C Less than five times of the value at 20˚C Test time 1000 hours Within ±30% of the initial measured value Within four times of the initial specified value Internal resistance Test time :1000 hours ; Same as endurance. Shelf life (70˚C) Outline Drawing Unit: mm d±0.05 copper clad steel wire(tinned) Sleeve Vent 25, 35 2– 2 Sleeve 10 2.6 F±0.5 D+1max. .1 D+0.5max. ±0 10 L+α max. 1.5±0.1 Markings 5 min. 15min. L+2max. øD F ød α 8 3.5 12.5 5.0 0.6 6.3±1 Vent 18 7.5 0.8 Lug terminal details 0.9±0.1 Thickness:0.8t 6.8 18 (–)Negative terminal indicated by cross notching Position of printed circuit board holes 7.5 8 to 2.1 2.0 Standard Ratings Max. Leakage Current(mA) after 24h ELNA Parts No. ø DxL(mm) Internal resistance(mΩ) at 1kHz (measurement value) 2.5 0.7 0.1 DZN-2R5D704G4T 8.0x15.0 200 2.5 1.0 0.1 DZN-2R5D105T 8.0x22.0 100 2.5 3.3 0.2 DZN-2R5D335T 12.5x23.0 40 2.5 4.7 0.3 DZN-2R5D475T 12.5x31.5 30 Max. operating voltage(V) Rated capacitance(F) 2.5 10 0.5 DZN-2R5D106T 18.0x35.0 20 2.5 20 0.8 DZN-2R5D206T 18.0x40.0 20 2.5 50 1.0 DZN-2R5D506T 25.0x40.0 15 2.5 100 1.0 DZN-2R5D107T 35.0x50.0 8 ∗ Internal resistance are not guaranteed values, but measurement value. ∗ We tailor packaged product in series and parallel arrangements according to voltage and capacitance as required. Part numbering system (example: 2.5V10F) DZN Series code — 2R5 Rated voltage symbol CAT.No.2005/2006E(2005.10.1) D 106 T Rated capacitance symbol 152 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.