0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
FEMDRW064G-88A19

FEMDRW064G-88A19

  • 厂商:

    FORESEE(江波龙)

  • 封装:

    FBGA-153_11.5X13MM

  • 描述:

    eMMc 64GBit FBGA153_11.5X13_SM

  • 数据手册
  • 价格&库存
FEMDRW064G-88A19 数据手册
Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 ® FORESEE Industrial eMMC Datasheet A-00032 FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 Version 1.0 LONGSYS ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an “AS IS” basis, without warranties of any kind. All brand names, trademarks and registered trademarks belong to their respective owners. This document and all information discussed herein remain the sole and exclusive property of Longsys Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppel or other-wise. For updates or additional information about Longsys products, contact your nearest Longsys office. 2020 Shenzhen Longsys Electronics Co., Ltd. All rights reserved. Everything for Memory 1 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 Revision History Rev. Date Changes Editor 1.0 2020/05/11 Document Create. MSG Everything for Memory 2 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 CONTENTS Revision History ............................................................................................................................................................ 2 CONTENTS .................................................................................................................................................................... 3 1 INTRODUCTION ..................................................................................................................................................... 5 2 PRODUCT LIST ...................................................................................................................................................... 5 3 KEY FEATURES ...................................................................................................................................................... 5 4 PACKAGE CONFIGURATIONS .............................................................................................................................. 6 5 6 4.1 Ball Pin Configuration .................................................................................................................................... 6 4.2 Package Dimension ....................................................................................................................................... 8 PRODUCT SPECIFICATIONS................................................................................................................................. 9 5.1 Write/Read Performance ............................................................................................................................... 9 5.2 Power Consumption....................................................................................................................................... 9 5.2.1 Active Power Consumption During Operation ...................................................................................... 9 5.2.2 Low power mode (stand-by) ................................................................................................................ 10 5.2.3 Low power mode (sleep) ...................................................................................................................... 10 Technical Notes................................................................................................................................................... 11 6.1 Functional Description ................................................................................................................................. 11 6.2 Interface timing mode .................................................................................................................................. 12 6.3 System Architecture ..................................................................................................................................... 12 6.4 Partition Management ................................................................................................................................. 13 6.5 Automatic Sleep Mode................................................................................................................................. 15 6.6 Sleep (CMD5) ................................................................................................................................................ 16 6.7 H/W Reset operation .................................................................................................................................... 16 6.8 Initial Data Acceleration(IDA) ...................................................................................................................... 16 6.9 High-speed mode selection ......................................................................................................................... 17 6.10 Bus width selection .................................................................................................................................. 17 6.11 Partition Configuration ............................................................................................................................. 17 Everything for Memory 3 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 6.12 7 Reference Schematics ............................................................................................................................. 18 REGISTER VALUE ................................................................................................................................................ 19 7.1 CID register ................................................................................................................................................... 19 7.2 CSD register .................................................................................................................................................. 20 7.3 Extended CSD register ................................................................................................................................. 22 7.4 OCR Register ................................................................................................................................................. 30 7.5 Field firmware update(FFU) ......................................................................................................................... 31 7.5.1 Longsys eMMC (FEMDRWxxxG-88A19) Field F/W update flow - CMD sequence ........................... 31 7.5.2 SUPPORTED_MODE [493] (Read Only) ................................................................................................ 31 7.5.3 FFU_FEATURE [492] (Read Only) ......................................................................................................... 32 7.5.4 FFU_ARG [490-487] (Read Only) .......................................................................................................... 32 7.5.5 FW_CONFIG[169] (R/W) ........................................................................................................................ 32 7.5.6 FFU_STATUS [26] (R/W/E_P) ............................................................................................................... 32 7.5.7 OPERATION_CODES_TIMEOUT[491](Read Only) ............................................................................... 33 7.5.8 MODE_OPERATION_CODES[29] (W/E_P) ............................................................................................ 33 7.6 S.M.A.R.T. Health Report ............................................................................................................................. 33 Everything for Memory 4 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 1 INTRODUCTION FORESEE eMMC is an embedded storage solution designed in the BGA package. The FORESEE eMMC consists of NAND flash and eMMC controller. The controller could manage the interface protocols, wearleveling, bad block management and ECC. FORESEE eMMC has high performance at a competitive cost, high quality and low power consumption, and eMMC is compatible with JEDEC standard eMMC 5.1 specifications. 2 PRODUCT LIST Table 1. Product List 3 Capacity Part Number NAND Flash Type User Density Package Size(mm) Package Type 32GB FEMDRW032G-88A19 256Gb x1 28.8GB 11.5 13.0 1.0 153 FBGA 64GB FEMDRW064G-88A19 256Gb x2 57.6GB 11.5 13.0 1.0 153 FBGA 128GB FEMDRW128G-88A19 256Gb x4 115.2GB 11.5 13.0 1.2 153 FBGA KEY FEATURES  eMMC5.1 specification compatibility - Backward compatible to eMMC4.41/4.5/5.0  Hardware ECC engine  Unique firmware backup mechanism  Global-wear-leveling  Supported features. - HS400, HS200 - Partitioning, RPMB - Boot feature, boot partition - HW Reset/SW Reset - Discard, Trim, Erase, Sanitize - Background operations, HPI - Enhanced reliable write - S.M.A.R.T. Health Report - FFU - Sleep / awake  Bus mode - Data bus width: 1 bit (default), 4 bits, 8 bits - Data transfer rate: up to 400MB/s (HS400) - MMC I/F Clock frequency: 0~200MHz  Operating voltage range - VCC(NAND): 2.7 ~ 3.6V - VCCQ(Controller): 1.7 ~ 1.95V / 2.7 ~ 3.6V  Temperature - Operation: -40℃ ~ +85℃  Others - Compliance with the RoHS Directive - Storage without operation: -40℃ ~ +85℃  Sudden-Power-Loss safeguard Everything for Memory 5 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 4 PACKAGE CONFIGURATIONS 4.1 Ball Pin Configuration Figure 1. Ball Array (Top View through package) Table 2. Ball Array Description Pin No. Pin Name A3 DAT0 A4 DAT1 These are bidirectional data signal. The DAT signals operate in push-pull mode. Only the device or the A5 DAT2 host is driving these signals at a time. By default, after power up or reset, only DAT0 is used for data B2 DAT3 B3 DAT4 B4 DAT5 DAT2, and DAT3. Correspondingly, immediately after entering to the 8-bit mode the device disconnects B5 DAT6 the internal pull-ups of lines DAT1–DAT7 B6 DAT7 Everything for Memory Description transfer. A wider data bus can be configured for data transfer, using either DAT0-DAT3 or DAT0-DAT7, by the eMMC host controller. The eMMC device includes internal pull-ups for data lines DAT1-DAT7. Immediately after entering the 4-bit mode, the device disconnects the internal pull ups of lines DAT1, 6 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 Pin No. Pin Name K5 RSTN C6 VCCQ M4 VCCQ N4 VCCQ P3 VCCQ P5 VCCQ E6 VCC F5 VCC J10 VCC K9 VCC C2 VDDi Description Hardware Reset Input VCCQ is the power supply line for host interface, have two power mode: High power mode:2.7V~3.6V; Lower power mode:1.7V~1.95V. VCC is the power supply line for internal flash memory, its power voltage range is:2.7V~3.6V. VDDi is internal power node, not the power supply. Connect 1uF capacitor VDDi to ground. This signal is a bidirectional command channel used for device initialization and command transfer. M5 CMD Commands are sent from the host to the device, and responses are sent from the device to the host. The CMD Signal has 2 operation modes: open drain for initialization, and push-pull for command transfer. H5 DS M6 CLK J5 VSS A6 VSS C4 VSS E7 VSS G5 VSS H10 VSS K8 VSS N2 VSS N5 VSS P4 VSS P6 VSS Everything for Memory Data Strobe signal. Newly assigned pin for HS400 mode. Data Strobe is generated from eMMC to host. In HS400 mode, read data and CRC response are synchronized with Data Strobe. Each cycle of this signal directs a one-bit transfer on the command and either a one-bit (1x) or a twobits transfer (2x) on all the data lines. Ground connections 7 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 4.2 Package Dimension Figure 2. 11.5mm x 13.0mm x 1.0mm Package Dimension Figure 3. 11.5mm x 13.0mm x 1.2mm Package Dimension Everything for Memory 8 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 5 PRODUCT SPECIFICATIONS 5.1 Write/Read Performance Table 3. Write/Read Performance Part Number Write Read FEMDRW032G-88A19 Up to 130 MB/s Up to 245 MB/s FEMDRW064G-88A19 Up to 145 MB/s Up to 245 MB/s FEMDRW128G-88A19 Up to 150 MB/s Up to 245 MB/s Note: Test Condition: Bus width x8, 200MHz DDR, 512KB data transfer, w/o file system overhead, measured on internal board. Test tool: uBOOT (Without O/S) Chunk size: 1MB Test area: 100MB/ Full-range of LBA. 5.2 Power Consumption Active Power Consumption During Operation Table 4. Active Power Consumption During Operation Part Number ICC ICCQ FEMDRW032G-88A19 70mA 120mA FEMDRW064G-88A19 80mA 120mA FEMDRW128G-88A19 100mA 120mA Note: Power Measurement conditions: Bus configuration =x8 @200MHz DDR, 23 . VCC = 3.3V & VCCQ = 1.8V. The measurement for max RMS current is the average RMS current consumption over a period of 100ms. Everything for Memory 9 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 Low power mode (stand-by) Table 5. Low power mode (stand-by) Part Number ICC ICCQ FEMDRW032G-88A19 70uA 150uA FEMDRW064G-88A19 80uA 150uA FEMDRW128G-88A19 100uA 150uA Note: Power Measurement conditions: Bus configuration =x8 @200MHz DDR, 23 . Standby: NAND Flash VCC & Controller VCCQ power supply is switched on. The measurement for max RMS current is the average RMS current consumption over a period of 100ms. Low power mode (sleep) Table 6. Low power mode (sleep) Part Number ICC ICCQ FEMDRW032G-88A19 0 150uA FEMDRW064G-88A19 0 150uA FEMDRW128G-88A19 0 150uA Note: Power Measurement conditions: Bus configuration =x8 @200MHz DDR, 23 . Sleep: NAND Flash VCC power supply is switched off (Controller VCCQ on) The measurement for max RMS current is the average RMS current consumption over a period of 100ms. Everything for Memory 10 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 6 Technical Notes 6.1 Functional Description FORESEE eMMC with powerful L2P (Logical to Physical) NAND Flash management algorithm provides unique functions:  Host independence from details of operating NAND flash The eMMC Controller already includes Flash management technologies such as data storage and retrieval, defect handling and diagnostics, and power management. Host can be free from considering about NAND Flash data operating.  Internal ECC to correct defect in NAND flash The hardware error correction code (ECC) function, which can prevent data corruption data corruption is included in the eMMC controller.  Sudden-Power-Loss Safeguard To prevent from data loss, a mechanism named Sudden-Power-Loss Safeguard is added in the eMMC. In the case of sudden power-failure, the eMMC would work properly after power cycling.  Global-wear-leveling To achieve the best stability and device endurance, this eMMC equips the Global Wear Leveling algorithm. It ensures that not only normal area, but also the frequently accessed area, such as FAT, would be programmed and erased evenly.  IDA (Initial Data Acceleration) The eMMC prevents the pre-burned data from data-loss with IDA, in case of our customer had pre-burned data to eMMC, before the eMMC being SMT.  Cache The eMMC enhanced the data written performance with Cache, with which our customer would get more endurance and reliability. Everything for Memory 11 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 6.2 Interface timing mode FORESEE eMMC support supports high speed DDR interface timing mode up to 400MB/s at 200MHz with 1.8V I/O supply. Table 7. Device Type Value (EXT_CSD register : DEVICE_TYPE [196]) 6.3 Bit Device Type Supportability 7 HS400 Dual Data Rate eMMC at 200 MHz – 1.2 V I/O Not support 6 HS400 Dual Data Rate eMMC at 200 MHz – 1.8 V I/O Support 5 HS200 Single Data Rate eMMC at 200 MHz - 1.2 V I/O Not support 4 HS200 Single Data Rate eMMC at 200 MHz - 1.8 V I/O Support 3 High-Speed Dual Data Rate eMMC at 52 MHz - 1.2 V I/O Not support 2 High-Speed Dual Data Rate eMMC at 52 MHz - 1.8 V or 3.3 V I/O Support 1 High-Speed eMMC at 52 MHz - at rated device voltage(s) Support 0 High-Speed eMMC at 26 MHz - at rated device voltage(s) Support System Architecture The eMMC can be operated in 1-bit, 4-bit, or 8-bit mode. NAND flash memory is managed by a controller inside, which manages ECC, wear leveling and bad block management. The eMMC provides easy integration with the host process that all flash management hassles are invisible to the host. Figure 4. eMMC System Architecture Everything for Memory 12 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 6.4 Partition Management The embedded device offers also the possibility of configuring by the host additional split local memory partitions with independent addressable space starting from logical address 0x00000000 for different usage models. Default size of each Boot Area Partition is 4096 KB and can be changed by Vendor Command as multiple of 128KB. Boot area partition size is calculated as (128KB * BOOT_SIZE_MULTI) The size of Boot Area Partition 1 and 2 cannot be set independently and is set as same value Boot area partition which is enhanced partition. Therefore, memory block area scan is classified as follows:  Factory configuration supplies boot partitions.  The RPMB partition is 4MB.  The host is free to configure one segment in the User Data Area to be implemented as enhanced storage media, and to specify its starting location and size in terms of Write Protect Groups. The attributes of this Enhanced User Data Area can be programmed only once during the device life-cycle (one-time programmable).  Up to four General Purpose Area Partitions can be configured to store user data or sensitive data, or for other host usage models. The size of these partitions is a multiple of the write protect group. Size and attributes can be programmed once in device life-cycle (one-time programmable). Each of the General-Purpose Area Partitions can be implemented with enhanced technological features. Figure 5. Partitions and user data area configuration Everything for Memory 13 / 33 Longsys Copyright A-00032 Industrial eMMC Datasheet FEMDRW032G-88A19 FEMDRW064G-88A19 FEMDRW128G-88A19 In boot operation mode, the master can read boot data from the slave (device) by keeping CMD line low or sending CMD0 with argument + 0xFFFFFFFA, before issuing CMD1. The data can be read from either boot area or user area depending on register setting. Table 8. Boot ack, boot data and initialization Time Timing Factor Value Boot ACK Time < 50 ms Boot Data Time
FEMDRW064G-88A19 价格&库存

很抱歉,暂时无法提供与“FEMDRW064G-88A19”相匹配的价格&库存,您可以联系我们找货

免费人工找货
FEMDRW064G-88A19
  •  国内价格
  • 1+166.32001
  • 10+158.62001

库存:0