00 NIM-CAMAC
& 01 COAXIAL
CONNECTORS
®
®
LEMO coaxial 00 and 01 Series ( 50 Ω )
Fundamental research in particle physics as practised within CERN and other nuclear research establishments requires
more and more complex equipment of high performance in order to achieve the objectives. The needs of such research
contribute to the development of leading products for the whole of industry. For many years LEMO has participated in
this evolution. This has resulted in a range of miniature coaxial connectors (50 Ω) with a push-pull self-latching system,
the LEMO 00.250 series. These connectors now form the basis of the NIM-CAMAC CD/N 549 standard.
The plugs and sockets of the 01 series are amongst the smallest available 50 Ω coaxial connectors with a self-latching
intermating capability. In spite of their small size and light weight, their technical characteristics remain excellent. Available in a wide range of housing configurations, they are especially useful when connecting onto printed circuit boards.
The LEMO 00 series and 01 are now used in many areas such as : telecommunications, sensors, medical equipment,
space research, etc...
The program covered in this catalog now includes more than 50 models suitable for many cable types.
Table of Contents
2 steps to select the right connector ................................................................................................................................................................................3
00.250 (NIM-CAMAC CD/N 549) Series
Part numbering system ........................................................................................................................................................................................... 7
Metal housing models ............................................................................................................................................................................................. 8
Plastic housing models ......................................................................................................................................................................................... 21
Watertight or vacuumtight models ....................................................................................................................................................................... 22
Metal housing models with mechanical keying .................................................................................................................................................... 24
Threaded-latching models .................................................................................................................................................................................... 26
Adaptors ............................................................................................................................................................................................................... 27
Variant .................................................................................................................................................................................................................. 30
Assembled cables ................................................................................................................................................................................................ 31
Accessories .......................................................................................................................................................................................................... 31
Spare parts ........................................................................................................................................................................................................... 33
Tooling .................................................................................................................................................................................................................. 35
Panel cut-outs ...................................................................................................................................................................................................... 38
Cable assembly .................................................................................................................................................................................................... 39
01.250 (Minax) Series
Part numbering system ......................................................................................................................................................................................... 45
Metal housing models .......................................................................................................................................................................................... 46
Threaded-latching models ................................................................................................................................................................................... 50
Adaptors ............................................................................................................................................................................................................... 50
Spare parts ........................................................................................................................................................................................................... 51
Tooling .................................................................................................................................................................................................................. 52
Panel cut-outs ...................................................................................................................................................................................................... 53
Cable assembly .................................................................................................................................................................................................... 53
Technical characteristics
Outer shell ............................................................................................................................................................................................................. 55
Insulator ................................................................................................................................................................................................................ 56
Electrical contact .................................................................................................................................................................................................. 56
Cable fixing ........................................................................................................................................................................................................... 58
Technical tables (VSWR) ....................................................................................................................................................................................... 58
Product safety notice ........................................................................................................................................................................................... 59
www.lemo.com
1
®
®
Precision modular connectors to suit your application
Since its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull
connectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in
more than 80 countries with the help of over 40 subsidiaries and distributors.
Over 75’000 connectors
The modular design of the LEMO range provides over 75’000 connectors from miniature ø 3 mm to ø 50 mm, capable
of handling cable diameters up to 30 mm and for up to 106 contacts.
This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in
most markets, including medical devices, test and measurement instruments, machinery, audio video broadcast,
telecommunications and military.
LEMO’s Push-Pull Self-Latching Connection System
This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides
absolute security against vibration, shock or pull on the cable, and facilitates operation in a very limited space.
The LEMO self-latching system allows
the connector to be mated by simply pushing
the plug axially into the socket.
Fv: average latching force
Once firmly latched, connection cannot be broken
by pulling on the cable or any other component
part other than the outer release sleeve.
Fa: average pull force with axial pull on
the collet nut
When required, the connector is disengaged
by a single axial pull on the outer release sleeve.
This first disengages the latches and then
withdraws the plug from the socket.
Fd: average unmating force with axial pull
on the outer release sleeve.
Series
Force
Fv
00
9N
Force
Fa
00
120N
01
5N
Series
01
110N
Series
Force
Fd
00
7N
01
6N
1N = 0,102 kg.
Force measured according to the standard IEC 60512- test
UL Recognition
LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO
connector, cable and your equipment) will be easier because LEMO connectors are recognized.
CE marking
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one or
several European safety directives. CE marking
applies to complete products or equipment, but not to electromechanical components, such as connectors.
RoHS
LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parliament and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical
and electronic equipment marketed in Europe.
2
www.lemo.com
®
®
2 steps to select the right connector
●
Step 1: Select connector series
Select the appropriate LEMO connector series according to the standard, the cable, according to the application or
the mated connector already on your equipment.
. 250 .
.
Part number coding
00 or 01 series
The NIM-CAMAC 00 .250 series
The 00 series is coaxial (50 Ω ). This connectors family was conceived for all applications where a high density of
connectors is necessary, especially for patch panels. Because of LEMO’s special self-latching system, it is possible
to connect them with a simple axial push-pull thereby reducing the space needed to mount sockets to an absolute
minimum, up to 50 sockets per square decimetre. LEMO 00 connectors served as the norm for NIM-CAMAC
CD/N549 standard, used in nuclear physics as well as many other applications.
The miniature 01.250 series
The 01 series is coaxial (50 Ω ). The plugs and sockets are amongst the smallest available 50 Ω coax connectors with a
self-latching intermating capability. In spite of their small size and light weight, their technical characteristics remain
excellent. Available in a wide range of housing configurations, they are especially useful when connecting onto printed
circuit boards.
Series
00
00
01
NIM-CAMAC
–
–
indoor
indoor
indoor
IP50
IP50
IP50
Ingress Protection 2)
IP64 / watertight and vacuumtight
IP50
IP64 models (HEV model)
Temperature range
- 55 to 260°C
- 55 to 260°C
- 55 to 230°C
–
Yes
–
Standard
Environment
Ingress
Protection 1)
Keying
Push-Pull self-latching
Latching
Contact type
Solder, crimp or print
Solder, crimp or print
Solder or print
Cable fixing type
Clamping or crimping
Crimping
Crimping
Note:
1)
2)
IP50 = Protection from the amount of dust that would interfer with the operation of the equipment
Ingress protection between LEMO socket and your device (IP64 = protection from splashed water and dust tight)
www.lemo.com
3
®
®
●
Step 2 : Complete the part number
Complete the part numbering by choosing the model depending on your cable and the application.
. 250 .
.
Part number coding
Verify the fitting to your cable and cable wire
conductor
screen
dielectric
sheath
Recommended coaxial cables
Electrical and general properties
Non
standard
Standard
MIL-C-17
RG 58 C/U
RG 142 B/U
RG 174 /U
RG 174 A/U
RG 178 B/U
RG 179 B/U
RG 187 A/U
RG 188 A/U
RG 195 A/U
RG 196 A/U
RG 316 /U
Huber+Suhner
Huber+Suhner
Storm
IEC
60096-2
CCTU
10-01A
50.3.1
KX 15
50.2.1
50.2.1
50.1.1
75.2.1
75.2.2
50.2.3
KX 38
KX 3A
KX 21A
50.1.2
50.2.2
KX 22A
G02232D-60
K01152-07
421-099
LEMO
Cable
group
LEMO
Part-No
CCX.50.RG5.8CU50N
CCX.50.RG1.42BU50M
CCX.50.RG1.74U25N
CCX.50.RG1.74AU27N
CCX.50.RG1.78BU18M
CCX.75.RG1.79BU26M
CCX.75.RG1.87AU26B
CCX.50.RG1.88AU24B
CCX.95.RG1.95AU37B
CCX.50.RG1.96AU20B
CCX.50.RG3.16BU26M
Operating Temperature
°C
voltage
Impedance
Capacitance
Attenuation
Ohm
pF/m
db/100 m
at 100 MHz
U max. KV eff.
from
to
00
6
7
3
8
1
2
2
4
5
1
4
50 ± 2
50 ± 2
50 ± 2
50 ± 2
50 ± 2
75 ± 3
75 ± 3
50 ± 2
95 ± 5
50 ± 2
50 ± 2
101
95
101
101
96
64
64
96
49
96
96
23
12.8
35
31.5
48
33
33
33
17
48
33
1.90
1.50
2.50
1.50
0.70
1.20
1.20
1.20
1.50
0.70
1.20
-25
-70
-40
-25
-90
-90
-50
-50
-90
-50
-90
+70
+200
+75
+70
+205
+205
+205
+205
+205
+205
+205
•
•
•
•
•
•
•
•
•
•
•
8
9
8
50 ± 2
50 ± 5
50 ± 2
101
96
96
24
72
72
1.50
0.45
2.50
-40
-45
-40
+105
+165
+75
•
•
•
Series
01
•
•
•
•
•
•
•
•
Mechanical properties
Non
standard
Standard
RG 58 C/U
4
Dielectric
Conductor
Type
Screen
Sheath
Stranding
ø mm
Mat.
ø mm
Mat.
ø mm
Mat.
Colour
ø mm
kg/100m.
CuSn
19 x 0.18
0.90
PE
2.92
CuSn
3.6
PVC
black
4.95
3.80
1st : 3.53
2 nd : 4.20
FEP
4.95
6.60
PVC1
PVC2
FEP
FEP
PFA
PFA
PFA
PFA
FEP
black
black
brown
brown
white
white
white
white
brown
2.55
2.80
1.80
2.60
2.60
2.60
3.70
2.00
2.60
1.10
0.85
1.50
1.60
1.60
2.80
1.10
1.60
PVC
grey
3.10
2.10
PFA
white
1.25
0.90
3.05
1.95
RG 142 B/U
CuStAg
solid
0.95
PTFE
2.95
CuAg
CuAg
RG 174 U
RG 174 A/U
RG 178 B/U
RG 179 B/U
RG 187 A/U
RG 188 A/U
RG 195 A/U
RG 196 A/U
RG 316 /U
CuSt
CuSt
CuStAg
CuStAg
CuStAg
CuStAg
CuStAg
CuStAg
CuStAg
7 x 0.16
7 x 0.16
7 x 0.10
7 x 0.10
7 x 0.10
7 x 0.18
7 x 0.10
7 x 0.10
7 x 0.18
0.48
0.48
0.30
0.30
0.30
0.54
0.30
0.30
0.54
PE
PE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
1.50
1.50
0.87
1.50
1.50
1.50
2.52
0.87
1.50
CuSn
CuSn
CuAg
CuAg
CuAg
CuAg
CuAg
CuAg
CuAg
2.0
2.0
1.4
2.0
2.0
2.0
3.1
1.37
2.1
G02232D-60
Cu
7 x 0.16
0.50
PE
1.50
CuAg
7 x 0.06
0.19
PFA
0.52
CuStAg
7 x 0.16
0.50
PTFE
1.52
CuAg
CuSn
CuAg
CuAg
CuAg
1 st : 1.95
2 nd : 2.40
0.9
1 st : 2.00
2 nd : 2.50
K01152-07
421-099
Weight
Mat.
FEP
www.lemo.com
00 SERIES (NIM-CAMAC)
®
www.lemo.com
®
5
®
®
00 Series (NIM-CAMAC CD/N 549)
The 00 series is a range of 50 Ω coaxial connectors. They are suitable for a wide variety of applications particularly in
measurement, control system and nuclear physics, having formed the basis for the NIM-CAMAC CD/N 549 standard.
LEMO 00 connectors offer customers many benefits including:
– Self-latching push-pull system
– Aesthetically pleasing appearance
– Small size
– Low weight
– Reliable performances
– Wide choice to suit application
– High packing density
– Rugged construction
– Ease of use
Metal housing models (page 8)
Fixed plugs
Straight plugs
Fixed sockets
Elbow sockets
FAA
FFA
ERA, ERE
EPL, EPM, EPK, EPR
FAN
FFA
ERN
FAB
FFA
ERC
FPA
FFC
ERT
FPL
FFC
ERX
Free sockets
Fixed coupler
PCA
RAD
Free coupler
PCS
RMA
EPS
Straight and
elbow plugs
with socket
Fixed sockets
EPN
PSA
EPY
FTR
PSS
Plugs with
resistor
Elbow plugs
FFY
PES
ECP
FTA
FRT
FLC
FFE
EHP
PFS
FLS.NTAE
FFF
FLS,
FLV
FFS
FLR
ELF
FTL
PLK
EPA, EPB, EPC
Socket with
microswitch
FTY
EPE
ERM
Plastic housing models* (page 21)
Threaded latching Models* (page 26)
Adaptors
Straight plug
Fixed socket
Straight plug
(See page 27)
FFA
ERN
FVS
Watertight or vacuumtight models (page 22)
Straight sockets
HGP
Straight coupler
HEP
HGW
EWF
EWV
VPS
SWH
Metal housing models with mechanical keying* (page 24)
Straight plug
Elbow sockets
FGG
XBG
Fixed sockets
XRG
XSG
EXG
ESG
PSG
* not included in NIM-CAMAC standard
6
www.lemo.com
®
®
Part Numbering System
Plug
FFA . 00 . 250 . N
T
A C 29
Free socket
PCA . 00 . 250 . N
T
L
C 29
Variant: (page 30)
Cable ø
Collet type:
C = with cable collet clamping
E = with cable crimping
K, D = with oversize cable collet
Fixed socket
ERA . 00 . 250 . N
T
Contact type :
A = male solder
C = male crimp
L = female solder
M = female crimp
L
Variant: (page 30)
Fixed coupler
RAD . 00 . 250 . N
Contact type :
A = male solder
D = male print
L = female solder
N = female print
T M
Model: (page 8)
Variant: (page 30)
Series: 00
Contact type :
A = male-female
E = male-male-female 3)
F = female-female-male
L = female-male
M = female-female
Insert configuration :
250 = coaxial ( 50 Ω )
Housing :
N = brass nickel-plated 4)
C = brass chrome-plated 4) 1)
D = brass gold-plated 5)
K = brass black chrome 1)
G = PEEK 2)
Insulator:
T = PTFE
L = PEEK 5)
Note: 1)
2)
3)
4)
5)
Part Number Example
treatment not available for the printed circuit models
available for the FFA and ERN model only
used only for models: FTA, FTL and FTY.
standard
non-standard, on request only
FFA.00.250.NTAC29 = straight plug with cable collet, series 00, coaxial type (50 Ω), outer shell in nickel-plated brass,
PTFE insulator, male solder contact, C type collet of 2.9 mm diameter.
Part Section Showing Internal Components
1
2
3
4
3
4
5
Fixed socket
outer shell
earthing crown
retaining ring
hexagonal nut
5
6
7
7
6
www.lemo.com
2
1
1
locking washer
insulator
female contact
1
2
3
4
7
6
2
5
4
8
3
Plug with cable clamping
5 rear insulator
outer shell
6 insulator
latch sleeve
7 male contact
collet nut
earthing sleeve
8 collet
1
6
5
4
2
3
7
Plug with cable crimping
outer shell
5 insulator
6 male contact
2 latch sleeve
3 crimp backnut
7 crimp ferrule
4 rear insulator
1
7
®
®
Metal housing models
Technical Characteristics
Mechanical and climatical
Characteristics
Cable pull off force 1)
Connector pull off force
Endurance
Electrical
Value
Standard
Test
Characteristics
> 100 N
> 90 N
> 5000
cycles
IEC 60512-9
IEC 60512-8
17c
15f
IEC 60512-5
9a
Impedance
Operating voltage (50 Hz)
Test voltage (50 Hz)
Rated current
Contact resistance
Shell electrical continuity
Insulating resistance
VSWR
Shielding efficiency
- 55°C + 260°C
Operating temperature
Note: 1) depending on cable design
Voltage Standing Wave Ratio
The VSWR (Voltage Standing Wave Ratio) is the value
representing the power reflected in a connection. The
VSWR varies with frequency, in most cases, the working
frequency range is where VSWR is ≤1.25.
1
Value
Standard
Test
50 Ω –
0.7 kV rms
–
2.1 kV rms IEC 60512-2
4a
4 A
IEC 60512-3 5a
< 6 mΩ
IEC 60512-2 2a
< 3.5 mΩ IEC 60512-2 2f
IEC 60512-2 3a
> 1012 Ω
see chart N°1 below
see chart N°2 below
Shielding efficiency (EMC properties) in dB
(transfer impedance in dBohm)
The shielding efficiency is the ratio between the electro-magnetic field inside the connector and a power
source at the outside of the connector (or vice versa).
VSWR
1.3
2
50Ω
75 Ω
(dBΩ)
-10
1.2
1.1
1.0
500
1000
FFS + PCS
-20
80
-30
100
-40
0.01
1500 f
(MHz)
Note : value for connectors with PTFE insulator. VSWR measured
50 Ω with a RG-174 A/U cable and 75 Ω with a RG-179 B/U cable.
Measured according to IEC-60169-1-1.
(dB)
60
0.1
1
FFA + PCA
10
100
FFS + PCS
120
1000 f
(MHz)
FFV + PCS
Note : measured according to IEC-60169-1-3 standard.
FFA Straight plug with cable collet
Part number
FFA.00.250.NTAC15
FFA.00.250.NTAC17
FFA.00.250.NTAC22
FFA.00.250.NTAC27
FFA.00.250.NTAC31
~26
ø 6.4
~18
M1
Cable
group
Cond. Dielectric Ø Sheath Ø
Ø max.
max.
min. max.
9 0.55
– 0.55
1 0.55
2-3-4 0.55
8 0.55
1.45
1.45
1.95
1.95
1.95
1.1
1.3
1.8
2.3
2.8
1.4
1.7
2.2
2.7
3.0
Cable assembly, solder contact (page 39)
S 4.5
8
www.lemo.com
®
®
FFA Straight plug with oversize cable collet
Part number
FFA.00.250.NTAK37
FFA.00.250.NTAK42
~ 36.5
ø8
ø 6.4
~ 28.5
S 6.5
M1
Cable
group
Cond.
Ø max
Dielectric Ø
maxi
8
–
0.55
0.55
1.95
1.95
Sheath Ø
mini maxi
3.0
3.3
3.6
4.1
Cable assembly, solder contact (page 39)
S7
FFA Straight plug with cable collet
and nut for fitting a bend relief
~33.5
ø 6.4
~25.5
Part number
Cable
group
Cond.
Ø max
Dielectric Ø
maxi
FFA.00.250.NTAC15Z
FFA.00.250.NTAC17Z
FFA.00.250.NTAC22Z
FFA.00.250.NTAC27Z
FFA.00.250.NTAC31Z
9
–
1
2-3-4
8
0.55
0.55
0.55
0.55
0.55
1.45
1.45
1.95
1.95
1.95
M1
Sheath Ø
mini maxi
1.1
1.3
1.7
2.3
2.8
1.4
1.7
2.1
2.7
3.0
Cable assembly, solder contact (page 39)
S6
Note: the bend relief must be ordered separately (see page 30).
FFC Straight plug with flats on latch sleeve
and cable collet
Part number
FFC.00.250.CTAC22
FFC.00.250.CTAC27
FFC.00.250.CTAC31
~26
ø 6.4
~18
S5
M3
Cable
group
Cond.
Ø max
Dielectric Ø
maxi
1
2-3-4
8
0.60
0.60
0.60
1.55
1.95
1.95
Sheath Ø
mini maxi
1.7
2.3
2.8
2.1
2.7
3.0
Cable assembly, solder contact (page 39)
S 5.5
FFC Straight plug with flats on latch sleeve
and oversize cable collet
Part number
FFC.00.250.CTAD42
FFC.00.250.CTAD52
FFC.00.250.CTAD56
~34.5
ø 8.5
ø 6.4
~26.5
S7
www.lemo.com
S8
M3
Cable
group
Cond.
Ø max
Dielectric Ø
maxi
5
6-7
–
1.05
1.05
1.05
3.05
3.05
3.05
Sheath Ø
mini maxi
3.1
4.1
5.1
4.0
5.0
5.5
Cable assembly, solder contact (page 39)
S 5.5
9
®
®
FFY Straight plug, large shell with cable collet
Part number
~33
ø 8.9
ø 8.5
~25
M2
S8
S7
FFY.00.250.NTAC40
FFY.00.250.NTAC47
FFY.00.250.NTAC52
FFE
Cable
group
Cond. Dielectric Ø Sheath Ø
Ø max
maxi
mini maxi
5 1.05
– 1.05
6-7 1.05
Straight plug with front sealing ring,
cable collet and nut for fitting a bend relief
(IP 54 protection index when mated)
Cable
group
Cond. Dielectric Ø Sheath Ø
Ø max
maxi
mini maxi
FFE.00.250.NTAC22Z 1
FFE.00.250.NTAC27Z 2-3-4
FFE.00.250.NTAC31Z 8
ø 7.4
~25.5
M1
3.2 3.8
3.9 4.5
4.6 5.0
Cable assembly, solder contact (page 39)
Part number
~33.5
3.05
3.05
3.05
0.55
0.55
0.55
1.95
1.95
1.95
1.7 2.1
2.3 2.7
2.8 3.0
Cable assembly, solder contact (page 39)
S6
Note: the bend relief must be ordered separately (see page 30).
FFF
Straight plug, non-latching,
with cable collet
Part number
FFF.00.250.NTAC22
FFF.00.250.NTAC27
FFF.00.250.NTAC31
~26
ø 6.4
~18
M1
Cable
group
Cond. Dielectric Ø Sheath Ø
Ø max
maxi
mini maxi
1
2-3-4
8
0.55
0.55
0.55
1.95
1.95
1.95
1.7 2.1
2.3 2.7
2.8 3.0
Cable assembly, solder contact (page 39)
S 4.5
FFS
Straight plug for cable crimping
Part number
FFS.00.250.CTAE24
FFS.00.250.CTAE31
FFS.00.250.CTAE52
M5
ø 6.4
M
S 5.5
S 5.5
FFS.00.250.CTCE24
FFS.00.250.CTCE30
FFS.00.250.CTCE31
FFS.00.250.CTCE35
FFS.00.250.CTCE44
FFS.00.250.CTCE52
FFS.00.250.CTCE56
M4
10
31 23
31 23
34 26
Cable Cond. Dielec. Sheath
group Ø maxi Ø maxi Ø maxi
1
3-4
6
0.4
0.55
0.97
0.95
1.65
3.05
2.35
3.0
5.2
Cable assembly, solder contact (page 41)
Part number
L
Dim
L M
Dim
Cable Cond. Ø Dielec. Sheath
L M group mini maxi Ø maxi Ø maxi
31
31
31
31
31
34
34
23
23
23
23
23
26
26
1
2
3-4
8
5
6
7
0.28 0.4
0.28 0.4
0.46 0.55
0.46 0.55
0.28 0.4
0.90 0.97
0.90 0.97
0.95
1.65
1.65
1.65
2.65
3.05
3.05
2.35
3.0
3.0
3.35
4.35
5.2
5.45
Cable assembly, crimp contact (page 40)
www.lemo.com
®
®
FFV
Straight plug for cable crimping
with improved screen efficiency 1)
Part number
FFV.00.250.NTAE24
FFV.00.250.NTAE31
FFV.00.250.NTAE52
M5
L
FFV.00.250.NTCE24
FFV.00.250.NTCE30
FFV.00.250.NTCE31
FFV.00.250.NTCE35
FFV.00.250.NTCE44
FFV.00.250.NTCE52
FFV.00.250.NTCE56
ø 6.4
S 5.5
S 5.5
M4
31 23
31 23
34 26
1
3-4
6
0.4
0.55
0.97
0.95
1.65
3.05
2.35
3.0
5.2
Cable assembly, solder contact (page 41)
Part number
M
Dim Cable Cond. Dielec. Sheath
L M group Ø maxi Ø maxi Ø maxi
Cond. Ø Dielec. Sheath
Dim Cable
L M group mini maxi Ø maxi Ø maxi
31
31
31
31
31
34
34
23
23
23
23
23
26
26
1
2
3-4
8
5
6
7
0.28 0.4
0.28 0.4
0.46 0.55
0.46 0.55
0.28 0.4
0.90 0.97
0.90 0.97
0.95
1.65
1.65
1.65
2.65
3.05
3.05
2.35
3.0
3.0
3.35
4.35
5.2
5.45
Cable assembly, crimp contact (page 40)
Note: 1) Screen efficiency >100dB at 1 GHz, see page 8.
FLC Elbow plug (90°) with cable collet
19.5
11.5
~16.5
ø 7.5
Part number
S6
FLC.00.250.CTAC22
FLC.00.250.CTAC27
FLC.00.250.CTAC31
Cable
group
1
–
–
Cond. Dielectric Ø Sheath Ø
Ø max
maxi
mini maxi
0.55
0.55
0.55
1.55
1.75
1.75
1.7 2.1
2.3
2.7
2.8 3.0
S 4.5
M6
Cable assembly, solder contact (page 42)
FLC Elbow plug (90°) with oversize cable collet
ø 7.5
19.5
11.5
FLC.00.250.CTAD42
FLC.00.250.NTAD52
FLC.00.250.NTAD56
S6
~25
Part number
S8
Cable
group
8
–
–
Cond. Dielectric Ø Sheath Ø
Ø max
maxi
mini maxi
0.97
0.97
0.97
1.75
1.75
1.75
3.1 4.0
4.1 5.0
5.1 5.5
S7
M6
ø 8.5
Cable assembly, solder contact (page 42)
FLS Elbow plug (90°) for cable crimping
17.5
H
9.5
ø9
Part number
FLS.00.250.NTAE31
FLS.00.250.NTAE35
FLS.00.250.NTAE52
FLS.00.250.NTAE56
M7
www.lemo.com
H Cable Cond. Dielectric Sheath
(mm) group Ø maxi
Ø maxi
Ø maxi
15 –
0.55
1.65
3.0
15
– 0.55 1.65 3.35
18 6
0.97
3.05
5.2
18
7 0.97 3.05 5.45
Cable assembly, solder contact (page 42)
11
®
®
FLV
Elbow plug (90°) for cable crimping
with improved screen efficiency *
17.5
Part number
ø9
9.5
H
FLV.00.250.NTAE31
FLV.00.250.NTAE35
FLV.00.250.NTAE52
FLV.00.250.NTAE56
M7
H
Cable
(mm) group
15
15
18
18
3-4
8
6
7
Cond.
Ø maxi
Dielectric
Ø maxi
Sheath
Ø maxi
0.55
0.55
0.97
0.97
1.65
1.65
3.05
3.05
3.0
3.35
5.2
5.45
Cable assembly, solder contact (page 42)
* Screen efficiency >100dB at 1 GHz, see page 8.
FAA Straight plug, non-latching, nut fixing
15.6
13
S9
9
2 maxi
ø8
ø5
M7x0.5
ø 10.2
Part number
P5
S 6.3
2.5
Panel cut-out (page 38)
FAN Straight plug, non-latching,
nut fixing with earthing tags
15.6
13
S9
FAA.00.250.NTA
Weight
(g)
ø5
2 maxi
ø8
Part number
M7x0.5
ø 10.2
9
FAN.00.250.CLA
P5
S 6.3
Weight
(g)
2.5
Panel cut-out (page 38)
FPA Straight plug, non-latching,
for printed circuit
7
5.08
14
ø1
Part number
ø5
ø 0.7 (4x)
17
FPA.00.250.NTD
Weight
(g)
2.5
P11 PCB drilling pattern (page 38)
FPL Elbow plug (90°), non-latching
for printed circuit
7
ø5
5.08
Part number
Weight
(g)
17.5
P10 PCB drilling pattern (page 38)
ø 0.7
12
2.5
7
10
FPL.00.250.NTD
(5x)
www.lemo.com
®
®
ERA Fixed socket, nut fixing
15
1
S9
ø8
ø 10.2
M7x0.5
Part number
5.5 maxi
ERA.00.250.NTL
S 6.3
P5
Weight
(g)
2.5
Panel cut-out (page 38)
ERN Fixed socket, nut fixing,
with earthing tags
15
S9
1
ø8
ø 10.2
M7x0.5
Part number
5.5 maxi
ERN.00.250.NTL
S 6.3
P5
Weight
(g)
2.5
Panel cut-out (page 38)
ERC Fixed socket, with thread,
with slots in flange
1
1.6
Part number
ø8
ø 10.2
M7x0.5
15
S9
ERC.00.250.NTL
Weight
(g)
2.6
P1
Panel cut-out (page 38)
P3
Panel cut-out for use wihout hexagonal nut (page 38)
5.5 maxi
ERE Fixed socket, nut fixing,
with conical lead-in
15
1
S9
ø8
ø 10.2
M7x0.5
Part number
5.5 maxi
S 6.3
ERE.00.250.NTL
P5
Weight
(g)
2.8
Panel cut-out (page 38)
15
1
Part number
ø8
6.98 ±0.03
ERT Straight socket without thread,
force or adhesive fit, with earthing tags
ERT.00.250.NTL
P4
www.lemo.com
Weight
(g)
2.1
Panel cut-out (page 38)
13
®
®
ERM Fixed socket, nut fixing, with microswitch
20
1
S9
ø8
ø 10.2
M7x0.5
Part number
ERM.00.250.NTL
Weight
(g)
3.0
A
5.5 maxi
S 6.3
P5 Panel cut-out (page 38)
Technical characteristics on request
B
ERX Fixed socket, with thread, with slots
in flange, with earthing tags
15
1.6
1
ø8
Part number
ERX.00.250.NTL
Weight
(g)
2.0
P3 Panel cut-out (page 38)
ECP Fixed socket with two nuts
15
2
ø9
ø9
M7x0.5
Part number
ECP.00.250.NTL
Weight
(g)
3.3
P1 Panel cut-out (page 38)
4 maxi
EHP Fixed socket, nut fixing,
protruding shell
S9
15
13.5
8.5
2 maxi
ø8
ø 6.4
M7x0.5
ø 10.2
Part number
EHP.00.250.NTL
P5
S 6.3
ELF
15
10.5
S 6.3
14
2.8
Panel cut-out (page 38)
Fixed socket, with slotted nut,
long threaded shell, with earthing tags
(back panel mounting)
2.5
1.5 mini
7.0 maxi
Part number
ø 10
M7x0.5
S 7.5
Weight
(g)
ELF.00.250.NTL
P5
Weight
(g)
3.1
Panel cut-out (page 38)
www.lemo.com
®
®
EPA-EPB Straight socket for printed circuit
7
ø 0.7 (5X)
17
5.08
L
ø 6.8
Part number
EPA.00.250.NTN
EPB.00.250.NTN
L
(mm)
Weight
(g)
14
12
3.4
3.3
P10 PCB drilling pattern (page 38)
EPC Straight socket for printed circuit
with clearance under the body
7
ø 0.7 (5x)
17
5.08
14
ø 6.8
Part number
EPC.00.250.NTN
Weight
(g)
3.3
P10 PCB drilling pattern (page 38)
EPE Fixed socket with two nuts,
for printed circuit
17
14
2.5
ø 10.2
ø 0.7 (5x)
S9
7
3.5 maxi
ø 10
M7x0.5
Part number
EPE.00.250.NTN
P1
5.08
Weight
(g)
4.3
Panel cut-out (page 38)
P12 PCB drilling pattern (page 38)
EPL Elbow socket (90°)
for printed circuit
7
ø 6.8
5.08
Part number
EPL.00.250.NTN
7
10
17.5
H
(mm)
Weight
(g)
10
4.3
P10 PCB drilling pattern (page 38)
ø 0.7
(5x)
EPM Elbow socket (90°) for printed circuit,
elevated solder tail
7
ø 6.8
5.08
Part number
17.5
13
4.6
P10 PCB drilling pattern (page 38)
ø 0.7
www.lemo.com
Weight
(g)
7
10
13
EPM.00.250.NTN
H
(mm)
(5x)
15
®
®
EPK Elbow socket (90°) for printed circuit
with clearance under the body
7
ø 6.8
5.08
Part number
17.5
4.2
10
7
EPK.00.250.NTN
Weight
(g)
P10 PCB drilling pattern (page 38)
ø 0.7
(5x)
EPS Elbow socket (90°) with two nuts,
for printed circuit
7
M7x0.5
ø 10.2
2.5
5.08
Part number
Weight
(g)
S9
EPS.00.250.NTN
5.4
17.5
10
7
ø 10
P1
ø 0.7
(5x)
P12 PCB drilling pattern (page 38)
4 maxi
EPR Elbow socket (90°) with two nuts
for printed circuit, with clearance
under the body (back panel mounting)
7
ø 10.2
M7x0.5
5.08
Part number
2.5
S9
EPR.00.250.NTN
7
ø 10
17.5
10
Panel cut-out (page 38)
P1
Weight
(g)
5.4
Panel cut-out (page 38)
P12 PCB drilling pattern (page 38)
ø 0.7
(5x)
4 maxi
EPY Elbow socket (90°) for printed circuit,
with two vertical sockets
5.08
ø 6.8
2.42
Part number
21.5
10.5
17.8
14.3
EPY.00.250.NTN
12.8
P13 PCB drilling pattern (page 38)
3.9
7.5
8
Weight
(g)
ø 0.7
16
(6x)
www.lemo.com
®
®
EPN Straight socket for press mounting
in pair on printed circuit
Part number
EPN.00.250.NTN
0.8
Weight
(g)
3.6
5.08
ø 1.5
P9
PCB drilling pattern (page 38)
14
7
10.7
8.7 maxi
8.3 mini
ø6
3.5
1.7 maxi
1.3 mini
ø 0.9
(2x)
2
PCA Free socket with cable collet
ø 6.5
~25
Part number
Cable
group
Cond.
Ø max
Dielectric Ø
maxi
PCA.00.250.NTLC15
PCA.00.250.NTLC22
PCA.00.250.NTLC27
PCA.00.250.NTLC31
9
1
2-3-4
8
0.55
0.55
0.55
0.55
1.45
1.95
1.95
1.95
M1
Sheath Ø
mini maxi
1.1
1.7
2.3
2.8
1.4
2.1
2.7
3.0
Cable assembly (page 39)
S 4.5
PCS Free socket for cable crimping
ø 6.5
L
S 5.5
Part number
Dim
L
Cable
group
PCS.00.250.NTME24
PCS.00.250.NTME30
PCS.00.250.NTME31
PCS.00.250.NTME44
PCS.00.250.NTME52
30
30
30
30
33
1
2
3-4
5
6
M4
S 5.5
Cond. Ø Dielec. Sheath
mini maxi Ø maxi Ø maxi
0.28 0.4
0.28 0.4
0.46 0.55
0.28 0.4
0.90 0.97
0.95
1.65
1.65
2.65
3.05
2.35
3.0
3.0
4.35
5.2
Cable assembly, crimp contact (page 40)
PSA Fixed socket, nut fixing, with cable collet
~25
Part number
S 4.5
www.lemo.com
M7x0.5
ø8
1
5.5 maxi
S 6.3
ø 10.2
S9
PSA.00.250.NTLC22
PSA.00.250.NTLC27
PSA.00.250.NTLC31
Cable
group
Cond.
Ø max
Dielectric Ø
maxi
1
2-3-4
8
0.55
0.55
0.55
1.95
1.95
1.95
M1
Cable assembly (page 39)
P5
Panel cut-out (page 38)
Sheath Ø
mini maxi
1.7
2.3
2.8
2.1
2.7
3.0
17
®
®
PSS Fixed socket, nut fixing, for cable crimping
Part number
Dim
L
Cable
group
PSS.00.250.NTME24
PSS.00.250.NTME30
PSS.00.250.NTME31
PSS.00.250.NTME35
PSS.00.250.NTME52
30
30
30
30
33
1
2
3-4
8
6
L
S9
S 5.5
M7x0.5
5.5 maxi
ø 10.2
ø8
1
Cond. Ø Dielec. Sheath
mini maxi Ø maxi Ø maxi
0.28 0.4
0.28 0.4
0.46 0.55
0.46 0.55
0.90 0.97
0.95
1.65
1.65
1.65
3.05
2.35
3.0
3.0
3.35
5.2
S 6.3
M4
Cable assembly, crimp contact (page 40)
P5
Panel cut-out (page 38)
PES Fixed socket, nut fixing, for cable crimping
(back panel mounting)
30
2.5
S 5.5
ø 10
M7x0.5
S 6.3
2.5 maxi
Part number
Cable
group
PES.00.250.NTME24
PES.00.250.NTME30
PES.00.250.NTME31
PES.00.250.NTME35
1
2
3-4
8
Cond. Ø Dielectric Ø Sheath Ø
mini maxi
maxi
maxi
0.28 0.4
0.28 0.4
0.46 0.55
0.46 0.55
M4
Cable assembly, crimp contact (page 40)
P5
Panel cut-out (page 38)
0.95
1.65
1.65
1.65
2.35
3.0
3.0
3.35
PFS Fixed socket, with two nuts, for cable crimping
(back panel mounting)
L
S9
S 5.5
M7x0.5
ø 10.2
ø 10
2.5
Part number
Dim
L
Cable
group
PFS.00.250.NTME24
PFS.00.250.NTME31
PFS.00.250.NTME52
30
30
33
1
3-4
6
Cond. Ø Dielec. Sheath
mini maxi Ø maxi Ø maxi
0.28 0.4
0.46 0.55
0.90 0.95
0.95
1.65
3.05
2.35
3.0
5.2
S 6.3
P5
5.5 maxi
Panel cut-out (page 38)
Cable assembly, please contact customer services
PLK Fixed elbow socket (90°), for cable crimping
(back panel mounting)
18.5
2.5
2.5 maxi
S6
Part number
ø 10
15.5
M7x0.5
S 6.3
PLK.00.250.NTLE31
PLK.00.250.NTLE35
P5
Cable
group
3-4
8
Cond. Ø Dielectric Ø Sheath Ø
mini maxi
maxi
maxi
0.46 0.55
0.46 0.55
1.65
1.65
3.0
3.35
Panel cut-out (page 38)
Cable assembly, please contact customer services
18
www.lemo.com
®
®
FRT Straight plug with resistor
29
21
ø 6.4
Part number
FRT.00.250.NTA00
FRT.00.250.NTA50
FRT.00.250.NTA100
Resistor
Weight
(g)
shorted
50 Ω 0.6W
100 Ω 0.4W
4.4
4.4
4.4
Note
S 5.5
Note:
Standard, first choice alternative
Non standard, on request only
FLR Elbow plug (90°) with resistor
17.5
ø9
9.5
18.8
Part number
FLR.00.250.NTA50
Resistor
Weight
(g)
50 Ω 0.6 W
5.6
RAD Fixed coupler, nut fixing
22
S9
1
M7x0.5
ø 10.2
ø8
Part number
RAD.00.250.NTM
P5
5.5 maxi
S 6.3
Weight
(g)
3.8
Panel cut-out (page 38)
Note: the first contact type mentioned (page 7) is always the contact
at the flange end.
RMA Free coupler
ø 6.4
22
Part number
RMA.00.250.NTM
Weight
(g)
2.7
FTR Elbow plug (90°) with socket
18.5
17.5
9.5
9
Part number
FTR.00.250.NTA
www.lemo.com
Weight
(g)
5.4
19
®
®
FTA T-plug with two sockets in line
Part number
30
FTA.00.250.NTF
7.8
17.5
9.5
ø9
Weight
(g)
FTL
T-plug with two sockets (90°)
Part number
28
ø9
FTL.00.250.NTF
Weight
(g)
7.1
18.5
20
FTY Straight plug with two parallel sockets
Part number
29.5
7
21.5
FTY.00.250.NTF
Weight
(g)
12.5
20
ø 16
7
Note: Test voltage: 1.1kV (rms) / IEC 60512-2 test 4a.
www.lemo.com
®
®
Plastic housing models
This plastic housing provides the ideal solution when the isolation of the connector is critical (non metallic).
The FFA and ERN models in PEEK allow weight saving and can provide ease of use in applications such as medical
electronic instrumentation.
Technical Characteristics
Mechanical and climatical
Characteristics
Value
Standard
Test
Cable pull off force
Connector pull off force
> 100 N
> 90 N
IEC 60512-9
17a
Endurance
> 5000
cycles
IEC 60512-5
9a
- 50°C + 250°C
Operating temperature
FFA Straight plug with cable collet,
PEEK outer shell
Part number
FFA.00.250.GTAC15
FFA.00.250.GTAC17
FFA.00.250.GTAC22
FFA.00.250.GTAC27
FFA.00.250.GTAC31
~33.5
ø7
~25.5
M1
Cable Cond. Dielectric Ø Sheath Ø
group Ø max
maxi
mini maxi
9
–
1
2-3-4
8
0.55
0.55
0.55
0.55
0.55
1.45
1.45
1.95
1.95
1.95
1.1 1.4
1.3 1.7
1.7 2.1
2.3 2.7
2.8 3.0
Cable assembly (page 39)
S6
ERN Fixed socket, nut fixing, with earthing tags,
PEEK outer shell
15
1
Part number
ø9
M7x0.5
ø 10.2
S9
5.5 maxi
S 6.3
ERN.00.250.GTL
Weight
(g)
1.4
P5 Panel cut-out (page 38)
PCA Free socket with cable collet,
PEEK outer shell
Part number
ø7
~32.5
S6
www.lemo.com
PCA.00.250.GTLC15
PCA.00.250.GTLC17
PCA.00.250.GTLC22
PCA.00.250.GTLC27
PCA.00.250.GTLC31
M1
Cable Cond. Dielectric Ø Sheath Ø
group Ø max
maxi
mini maxi
9
–
1
2-3-4
8
0.55
0.55
0.55
0.55
0.55
1.45
1.45
1.95
1.95
1.95
1.1 1.4
1.3 1.7
1.7 2.1
2.3 2.7
2.8 3.0
Cable assembly (page 39)
21
®
®
Watertight or vacuumtight models
A range of sealed sockets and couplers allows the device on which they are fitted to reach a protection index of IP68
as per IEC 60529 (unmated). They are fully compatible with plugs of the same series and are widely used for portable
radios, military, laboratory equipment, aviation, etc.
These models are identified by a letter «P» at the end of the reference for watertight model and by a «PV» for vacuum
tight models. Epoxy resin or o-rings are used to seal these models.
Mechanical and climatical
Characteristics
Endurance
Humidity
Temperature range
Salt spray corrosion test
Climatical category
Leakage rate (He)1)
Maximum
operating pressure2)
Value
Standard
> 5000 cycles IEC 60512-5 test 9a
up to 95% at 60° C
- 20° C/+100° C
> 144h
IEC 60512-6 test 11f
20/80/21
IEC 60068-1
< 10-7 mbar.l.s -1 IEC 60512-7 test 14b
60 bars
IEC 60512-7 test 14d
Note: 1) only for vacuumtight models. Residual traces of grease used during (He) leak testing are on the o-ring. Please contact us for further details.
2) this value corresponds to the maximum allowed pressure difference for the assembled socket.
HGP Fixed socket, nut fixing,
watertight or vacuumtight
17
1.5
Part number
ø 11
M7x0.5
ø 10.2
S9
HGP.00.250.NTLP
HGP.00.250.NTLPV
Weight
(g)
4.2
4.2
8 maxi
P1
HGW Fixed socket, nut fixing, watertight
with rear sealing ring
15
1
Part number
ø8
M7x0.5
ø 13
S9
Panel cut-out (page 38)
HGW.00.250.NTLP
P1
3.8 mini
5.8 maxi
Weight
(g)
4.2
Panel cut-out (page 38)
Note: Non standard, on request only
HEP Fixed socket, nut fixing, watertight
for printed circuit (back panel mounting)
18
2.5
ø11
ø8.7
M7x0.5
4.7
S9
2 maxi
S 6.3
5.08
ø 0.7
3
Part number
HEP.00.250.NTNP
0.9 (4 x)
P5
Weight
(g)
7.4
Panel cut-out (page 38)
P15 PCB drilling pattern (page 38)
22
www.lemo.com
®
®
EWF Fixed socket, nut fixing, watertight
or vacuumtight (back panel mounting)
17
3
S9
ø 10.2
ø 11
M7x0.5
Part number
EWF.00.250.NTLP
EWF.00.250.NTLPV
Weight
(g)
4.2
4.2
9.5 maxi
S9
P1
Panel cut-out (page 38)
EWV Fixed socket, screw fixing, watertight
or vacuumtight
17
Part number
ø 11
EWV.00.250.NTLP
EWV.00.250.NTLPV
ø 7.9
M7x0.5
ø 1.5
2.6
P2
Weight
(g)
3.7
3.7
Panel cut-out (page 38)
SWH Fixed coupler, nut fixing, vacuumtight
24.5
1.5
S9
M7x0.5
ø 11
ø 10.2
Part number
SWH.00.250.NTMV
P1
Weight
(g)
5.2
Panel cut-out (page 38)
5.5 maxi
Note: this model is sealed with o-rings (no epoxy).
VPS Fixed socket, short shell,
vacuumtight with cable crimping
(back panel mounting)
Part number
ø 10
ø7
ø 11
M7x 0.5
24.5
1.5 max
VPS.00.250.CTLE31
Cable
group
3-4
Cond. Ø Dielectric Ø Sheath Ø
maxi
maxi
mini maxi
0.46 0.55
1.65
3.0
S5
16.5
P1
Panel cut-out (page 38)
Cable assembly, please contact customer service
www.lemo.com
23
®
®
Metal housing models with mechanical keying
The straight plug and receptacle models FGG, XBG, XRG, XSG, ESG, EXG and PSG are available with a key to avoid
cross mating of similar connectors. These models are not included in the NIM-CAMAC standard.
The standard "G" key consists of one mechanical alignment key.
Front view of the
standard "G" key
FGG Straight plug with key (G),
with cable crimping
Part number
FGG.00.250.NTAE24
FGG.00.250.NTAE31
FGG.00.250.NTAE52
M5
L
L
31
31
34
ø 6.4
Part number
FGG.00.250.NTCE24
FGG.00.250.NTCE31
FGG.00.250.NTCE52
S 5.5
M4
2.5
0.4
0.55
0.97
0.95
1.65
3.05
2.35
3.0
5.2
L
Dim
M
31
31
34
23
23
26
Cable Cond. Ø Dielec. Sheath
group mini maxi Ø maxi Ø maxi
1
3-4
6
0.28 0.4
0.46 0.55
0.90 0.97
0.95
1.65
3.05
2.35
3.0
5.2
Cable assembly, crimp contact (page 40)
M7x0.5
Part number
17.5
XBG.00.250.NTN
9
P1
ø 10
7
1
3-4
6
Cond. Dielec. Sheath
Ø maxi Ø maxi Ø maxi
XBG Elbow socket (90°) with slotted nut,
for printed circuit with key (G)
7
5.08
23
23
26
Cable
group
Cable assembly, solder contact (page 41)
M
S 5.5
Dim
M
Weight
(g)
5.1
Panel cut-out (page 38)
3
P12 PCB drilling pattern (page 38)
ø 0.7
(5 x)
5 maxi
XRG Elbow socket (90°), with key (G), short shell
and slotted nut, for printed circuit,
screw fixing (back panel mounting)
14
7
2 x M 1.4
4 maxi
Part number
ø 10
M7x0.5
3
7
2.5
XRG.00.250.NTN
P1
Weight
(g)
3.8
Panel cut-out (page 38)
P14 PCB drilling pattern (page 38)
24
www.lemo.com
®
®
XSG Elbow socket (90°) with slotted with key (G),
and hex nuts for printed circuit
S9
7
2.5
ø 10.3
M7x0.5
5.08
Part number
XSG.00.250.NTN
17.5
7
ø 10
P1
Weight
(g)
5.4
Panel cut-out (page 38)
3
P12 PCB drilling pattern (page 38)
ø 0.7
(5 x)
4 maxi
ESG Fixed socket with two round nuts,
threaded shell, with key (G)
(back panel mounting)
15
Part number
ø9
ø9
M7x0.5
2
ESG.00.250.NLL
Weight
(g)
3.1
4 maxi
P1
EXG Elbow socket (90°) with slotted nut for printed
circuit, with key (G), with o-ring on flange
(back panel mounting). Special shell design.
2.5
7
Panel cut-out (page 38)
ø10
M7x0.5
5.08
Part number
11
9
ø 10
17.5
EXG.00.250.NTNY
P1
6.3
Panel cut-out (page 38)
5 maxi
ø 0.7
ø 1.2
Weight
(g)
P15 PCB drilling pattern (page 38)
(4x)
PSG Fixed socket, nut fixing, with key (G)
with cable crimping
L
www.lemo.com
M7x0.5
S 5.5
5.5 maxi
ø 10.2
1
ø8
S9
Part number
Dim
L
Cable
group
PSG.00.250.NTME24
PSG.00.250.NTME31
PSG.00.250.NTME52
30
30
33
1
3-4
6
Cond. Ø Dielec. Sheath
mini maxi Ø maxi Ø maxi
0.28 0.4
0.46 0.55
0.90 0.97
0.95
1.65
3.05
2.35
3.0
5.2
S 6.3
M4
Cable assembly, crimp contact (page 40)
P5
Panel cut-out (page 38)
25
®
®
Threaded-coupling models
The straight plug and receptacle models FVS, EPE and EPS are available with threaded coupling.
On sockets, 3.2 mm minimum length of free threading must be available to ensure screw mating. These models are not
included in the NIM-CAMAC standard.
FVS Straight plug for cable crimping
Part number
FVS.00.250.NTAE24
FVS.00.250.NTAE31
FVS.00.250.NTAE52
M5
L
FVS.00.250.NTCE24
FVS.00.250.NTCE30
FVS.00.250.NTCE31
FVS.00.250.NTCE35
FVS.00.250.NTCE44
FVS.00.250.NTCE52
FVS.00.250.NTCE56
ø9
S5
S5
M4
31 23
31 23
34 26
1
3-4
6
0.4
0.55
0.97
0.95
1.65
3.05
2.35
3.0
5.2
Cable assembly, solder contact (page 41)
Part number
M
Dim Cable Cond. Dielec. Sheath
L M group Ø maxi Ø maxi Ø maxi
Dim
Cable Cond. Ø Dielec. Sheath
L M group mini maxi Ø maxi Ø maxi
31
31
31
31
31
34
34
23
23
23
23
23
26
26
1
2
3-4
8
5
6
7
0.28 0.4
0.28 0.4
0.46 0.55
0.46 0.55
0.28 0.4
0.90 0.97
0.90 0.97
0.95
1.65
1.65
1.65
2.65
3.05
3.05
2.35
3.0
3.0
3.35
4.35
5.2
5.45
Cable assembly, crimp contact (page 40)
EPE Straight socket with two nuts,
for printed circuit
17
14
3.2 mini
0.7 maxi
S9
7
2.5
Part number
ø 10
EPE.00.250.NTN
P1
5.08
EPS.00.250.NTN
ø 10
7
10
26
Panel cut-out (page 38)
Part number
P1
ø 0.7
(5 x)
4.3
EPS Elbow socket (90°) with two nuts,
for printed circuit
S9
17.5
Weight
(g)
P12 PCB drilling pattern (page 38)
3.2 mini
M7x0.5
5.08
7
ø 10.2
ø 0.7
(5x)
ø10.2
M7x0.5
2.5
Weight
(g)
5.4
Panel cut-out (page 38)
P12 PCB drilling pattern (page 38)
0.7 maxi
www.lemo.com
®
®
Adaptors
ABF Adaptor from LEMO plug to BNC socket
36
Part number
28
8.3
ø 11.5
ABF.00.250.NTA
Weight
(g)
35.5
Part number
APF.00.250.DTAB
APF.00.250.DTAR
ø 6.4
ø 8.3
ø 4.6
APF Adaptor from LEMO plug
to CINCH socket
Colour
of the ring
Weight
(g)
white
red
7
7
43.5
ABA Adaptor from LEMO socket to BNC plug
28.5
ø 14.5
Part number
ABA.00.250.NTL
Weight
(g)
18.7
ABC Adaptor from LEMO socket
to BNC socket
ø 14.5
29.5
Part number
29.5
S 16
S 17
Part number
ABD.00.250.NTM
P7
S 11.7
www.lemo.com
17
ABD Adaptor from LEMO socket
to BNC fixed socket
ø 19.5
1/2-28 UNEF - 2A
ABC.00.250.NTM
Weight
(g)
Weight
(g)
21.4
Panel cut-out (page 38)
5 maxi
27
®
ABB Adaptor from LEMO fixed socket
to BNC socket
3/8-32 UNEF - 2A
®
25
S 11
Part number
ABB.00.250.NTM
P6
Weight
(g)
9.4
Panel cut-out (page 38)
9.5 maxi
S 8.7
ACA Adaptor from LEMO socket to C plug
31
ø 19.5
Part number
ACA.00.250.NTL
Weight
(g)
32
Note: Non standard, on request only
AGH Adaptor from LEMO socket to UHF plug
26
ø 18.5
Part number
AGH.00.250.NTL
Weight
(g)
13.8
ANA Adaptor from LEMO socket to N plug
33.5
ø 20.5
Part number
ANA.00.250.NTL
Weight
(g)
38
ANB Adaptor from LEMO socket to N socket
ø 17.5
45.5
Part number
ANB.00.250.NTM
Weight
(g)
61.7
5/8 - 24 UNEF - 2A
Note: Non standard, on request only
28
www.lemo.com
®
®
5/8 - 24 UNEF - 2A
ANC Adaptor from LEMO socket
to N fixed socket
46
S 19
ø 21.8
Part number
ANC.00.250.NTM
P8
S 13.5
17 maxi
Weight
(g)
63.5
Panel cut-out (page 38)
Note: Non standard, on request only
ASA Adaptor from LEMO socket to SMA plug
30
ø9
Part number
ASA.00.250.NTL
Weight
(g)
4.9
S8
1 / 4 - 36 UNS - 2A
ASB Adaptor from LEMO socket
to SMA socket
30.8
ø9
Part number
ASB.00.250.NTM
Weight
(g)
4.6
S8
1 / 4 - 36 UNS - 2A
ASF Adaptor from LEMO plug to SMA socket
31.8
23.8
Part number
ø9
ASF.00.250.NTA
Weight
(g)
4.6
S8
ASG Adaptor from LEMO plug to SMA plug
31
23
ø9
Part number
ASG.00.250.NTC
Weight
(g)
4.9
S8
www.lemo.com
29
®
®
Variant
Bend relief for models with collet (letter Z in the variant position)
Need to be ordered
Reference
Need to be
ordered separately
(see page 33)
C15Z
C17Z
C22Z
C27Z
C31Z
C52Z
K37Z
K42Z
D42Z
D52Z
GMA.00.0ll.Dl
GMA.00.0ll.Dl
–
GMD or GMB.00.0ll.Dl
GMD or GMB.00.0ll.Dl
GMA.0B.0ll.Dl
GMA.0B.0ll.Dl
GMA.0B.0ll.Dl
GMA.0B.0ll.Dl
GMA.0B.0ll.Dl
Note: The “GMD” are thin bend reliefs (for very flexible cables)
Bend relief for models for cable crimping (no letter in the variant position)
The bend relief can be fitted directly over the crimp ferrule
Need to be ordered
30
Reference
Need to be
ordered separately
(see page 33)
E24
E25
E30
E31
E32
E35
E44
E52
E56
GMD or GMB.00.0ll.Dl
GMD or GMB.00.0ll.Dl
GMD or GMB.00.0ll.Dl
GND.00.028.Dl
GMD or GMB.00.0ll.Dl
–
–
–
–
Note: The “GMD” are thin bend reliefs (for very flexible cables)
www.lemo.com
®
®
Assembled cables
MFB models
MSB models
Delay lines
Part number
MFB.00.250.RTE005
MFB.00.250.RTE010
MFB.00.250.RTE020
MFB.00.250.RTE030
MFB.00.250.RTE040
MFB.00.250.RTE050
MFB.00.250.RTE060
MFB.00.250.RTE080
MFB.00.250.RTE100
MFB.00.250.RTE160
MFB.00.250.RTE200
MFB.00.250.RTE320
MFB.00.250.RTE640
Assembled Cables
Delay
(ns)
0.5
1.0
2.0
3.0
4.0
5.0
6.0
8.0
10.0
16.0
20.0
32.0
64.0
Part number
MSB.00.250.RTE005
MSB.00.250.RTE010
MSB.00.250.RTE020
MSB.00.250.RTE030
MSB.00.250.RTE040
MSB.00.250.RTE050
MSB.00.250.RTE060
MSB.00.250.RTE080
MSB.00.250.RTE100
MSB.00.250.RTE160
MSB.00.250.RTE200
MSB.00.250.RTE320
MSB.00.250.RTE640
Length
(cm)
Part number
MFB.00.250.LTE010
MFB.00.250.LTE020
MFB.00.250.LTE030
MFB.00.250.LTE040
MFB.00.250.LTE050
MFB.00.250.LTE060
MFB.00.250.LTE080
FRT
MFB.00.250.LTE100
MFB.00.250.LTE150
MFB.00.250.LTE200
MFB.00.250.LTE300
MFB.00.250.LTE400
MFB.00.250.LTE500
10
20
30
40
50
60
80
100
150
200
300
400
500
Part number
MSB.00.250.LTE010
MSB.00.250.LTE020
MSB.00.250.LTE030
MSB.00.250.LTE040
MSB.00.250.LTE050
MSB.00.250.LTE060
MSB.00.250.LTE080
MSB.00.250.LTE100
MSB.00.250.LTE150
MSB.00.250.LTE200
MSB.00.250.LTE300
MSB.00.250.LTE400
MSB.00.250.LTE500
Note: the standard cable used to manufacture these cable assemblies is according to IEC.50.2.1 standard. On request this type of cable can be
replaced by other coaxial cables. Other cable lengths are available on request.
Accessories
Fitting of the cord
Slide the plug into the loop of the cord. Place the loop
into the groove in front of the collet nut and tighten the
loop.
BFG Caps for plug with or without keying
Part number
BFG.00.100.PCSG
9.8
ø 7.5
10
N
www.lemo.com
Weight
(g)
N1)
(mm)
0.7
60
Note: 1) the tolerance on this dimension is ± 5 mm.
Upon request this cap can be supplied in black and the last letter “G”
of the part number should be replaced with “N”.
l
l
l
l
l
Body material: Polyoxymethylen (POM) grey
Cord material: Polyamid 6, grey
O-ring material: Silicone rubber
Maximum operating temperature: 100°C
Watertightness: IP61 according to IEC 60529
31
®
®
BRA Blanking cap for fixed socket and free
straight socket
9
3.5
9.8
ø 7.5
Part number
N1)
(mm)
0.6
60
Note: 1) the tolerance on this dimension is ± 5 mm.
Upon request this cap can be supplied in black and the last letter “G”
of the part number should be replaced with “N”.
N
ø 3.5
BRA.00.200.PCSG
Weight
(g)
l O-ring material: Silicone rubber
l Maximum operating temperature: 100°C
l Watertightness: IP61 according to IEC 60529
l Body material: Polyoxymethylen (POM) grey
l Cord material: Polyamid 6, grey
Fitting of the cord
Slide the socket into the loop of the cord. Place the loop into
the groove in front of the collet nut and tighten the loop.
BRD Blanking cap for free socket
Part number
BRD.00.200.PCSG
9
Weight
(g)
N1)
(mm)
0.5
60
ø 7.5
9.8
3.5
Note: 1) the tolerance on this dimension is ± 5 mm.
Upon request this cap can be supplied in black and the last letter “G”
of the part number should be replaced with “N”.
l
l
l
l
l
N
Body material: Polyoxymethylen (POM) grey
Cord material: Polyamid 6, grey
O-ring material: Silicone rubber
Maximum operating temperature: 100°C
Watertightness: IP61 according to IEC 60529
BRE Blanking cap for fixed socket,
free socket and coupler
8.8
7.5
3.5
Part number
ø 3.5
N
ø8
BRE.00.200.NAS
Weight
(g)
N1)
(mm)
6.5
60
Note: 1) the tolerance on this dimension is ± 5 mm.
l
l
l
l
l
Body material: Brass (UNS C 38500), nickel-plated (3 µm)
Cable material: Stainless steel
O-ring material: Silicone rubber or FPM
Maximum operating temperature: 250°C
Watertightness: IP61 according to IEC 60529
GCD Earthing cap
ø8
øC
L
S7
Part number
GCD.00.020.LA
GCD.00.032.LA
GCD.00.050.LA
Dim.
Cable
group L C
1 12 2.0
2-3-4 16 3.2
6 19 5.0
Note: the shield braid of the cable should be soldered onto the back of
the cap screwed on the socket outer shell.
l Material: Brass (UNS C 38500) gold-plated (0.5 µm)
32
www.lemo.com
®
®
GM• Bend relief
A
Dim.
L
ø Cable
max min
Nut for fitting the
bend relief part nb
GMA.00.012.D •
GMA.00.018.D•
GMB.00.025.D•
GMB.00.028.D•
GMB.00.032.D•
GMD.00.025.D•
GMD.00.028.D•
GMD.00.032.D•
1.2
1.8
2.5
2.8
3.2
2.5
2.8
3.2
22
22
22
22
22
22
22
22
1.4
2.1
2.8
3.1
3.5
2.8
3.1
3.5
1.1
1.8
2.5
2.8
3.2
2.5
2.8
3.2
FFM.00.130.LN
FFM.00.130.LN
FFM.00.130.LN
FFM.00.130.LN
FFM.00.130.LN
FFM.00.130.LN
FFM.00.130.LN
FFM.00.130.LN
GMA.0B.025.D •
GMA.0B.030.D•
GMA.0B.035.D•
GMA.0B.040.D•
GMA.0B.045.D•
2.5
3.0
3.5
4.0
4.5
24
24
24
24
24
2.9
3.4
3.9
4.4
5.2
2.5
3.0
3.5
4.0
4.5
FFM.0B.130.LC
FFM.0B.130.LC
FFM.0B.130.LC
FFM.0B.130.LC
FFM.0B.130.LC
øA
Part number
L
Note:
a) for use with crimp models and nut for fitting a bend relief.
b) the last letter of the part number “•” specifies the colour.
Refer to the table below, for GRA washers, to define another
colour and replace the letter “•” by the one corresponding
to the colour required.
c) material: TPU (Thermoplastic Polyurethane)
d) operating temperature: -40°C + 80°C
GRA Insulating washers
Weight
(g)
Part number
GRA.00.269.G•
1.8
ø10
1
ø 8.8
6.4
3.5 maxi
Note:
a) sockets and plugs mounted on panels can be fitted with insulating
washers. The nine colours available combined with those for the
bend reliefs makes colour coding possible.
b) the last letter of the part number “•” specifies the colour.
Refer to the table below to define another colour and replace
the letter “•” by the one corresponding to the colour required.
c) material: Polyamid
d) operating temperature: -40°C + 80°C
Ref.
8
0.1
Colour
A
B
G
blue
white
grey
Ref.
J
M
N
Colour
Ref.
yellow
brown
black
R
S
V
Colour
red
orange
green
Spare Parts
FFS Crimp ferrule
L
øB
øA
Part number
FFS.00.160.DN
FFS.00.161.MN
FFS.00.162.DN
FFS.00.163.DN
FFS.00.164.DN
CRK.0A.160.DN
Cable
group
øA
Dim.
øB
L
1
2-3-4
8
5
6
7
3.1
3.8
4.4
5.3
6.2
6.2
2.4
3.05
3.4
4.4
5.25
5.5
8
8
8
8
11
11
Note: sockets and plugs to be crimped are always supplied with a
crimp ferrule. To order this accessory separately, use the above part
numbers.
● Material: Copper (UNS C 18700) nickel-plated (3µm)
www.lemo.com
33
®
®
GBB Tapered washer
ø9
2
ø 7.1
Weight
(g)
Part number
GBB.00.250.LN
0.2
Note: to order this accessory separately, use the above part number.
● Material: Brass (UNS C 38500) nickel-plated (3 µm)
GBA Locking washer
ø9.5
1
ø7.1
Weight
(g)
Part number
GBA.00.250.FN
0.2
Note: sockets and plugs are always supplied with a locking washer.
To order this accessory separately, use the above part number.
GEA Hexagonal nut
9
2
M7 x 0.5
Weight
(g)
Part number
ø 10.2
GEA.00.240.LN
0.6
Note: sockets and plugs are supplied with a hexagonal nut as standard. To order this accessory separately, use the above part number.
The last letters “LN” of the part number refer to the nut material and
treatment. If a nut in aluminium alloy is desired, replace the last letters
of the part number by “PT”.
● Material:
- Brass (UNS C 38500) nickel-plated (3 µm)
- Aluminium alloy natural anodized
GEB Round nut
ø9
M7 x 0.5
4
Part number
Weight
(g)
Standard
for models
0.8
ECP, ESG
GEB.00.240.LN
Note: to order this accessory separately, use the above part number.
● Material: Brass (UNS C 38500) nickel-plated (3 µm)
GEC Conical nut
8
M7 x 0.5
2.5
Weight
(g)
ø 10
Part number
GEC.00.240.LN
0.6
Note: to order this accessory separately, use the above part number.
● Material: Brass (UNS C 38500) nickel-plated (3 µm)
GEG Notched nut
øA
L
øB
e
Part number
GEG.00.240.LN
A
8.7
Dimensions (mm)
B
e
10
M7 x 0.5
Standard
for models
L
2.5
EPE, EPS, EPR
PES, PFS, PLK,
VPS, HEP
Note: to order this accessory separately, use the above part numbers.
● Material: Brass (UNS C 38500) nicked-plated (3 µm)
34
www.lemo.com
®
®
GEB Slotted nut
øA
L
e
A
Dimensions (mm)
B
e
GEB.00.242.LN
8.5
10
M7 x 0.5
Standard
for models
L
øB
Part number
2.5
ELF, XBG,
XRG, XSG,
EXG
Note: to order this accessory separately, use the above part numbers.
● Material: Brass (UNS C 38500) nicked-plated (3 µm)
GCA Earthing Washer
ø 9.5
0.4
ø 7.1
18.2
Part number
GCA.00.255.LT
Weight
(g)
0.2
● Material: Brass (UNS C 27400) treated CuSnZn (2 µm)
Tooling
DCG Spanner for hexagonal nut
40
50
Part number
of the nut
Part number
DCG.91.149.0TN
GEA.00.240.LN
● Material: Blackened steel
ø 14
DCA Spanner for hexagonal nut with locator
for flats on socket thread
65 maxi
50
DCA.91.149.0TN
ø 14
Part number
of the nut
Part number
GEA.00.240.LN
● Material: Blackened steel
ø 10.1
DCH Spanner for notched nut
ø 12.8
124
Part number
DCH.91.101.PA
Part number
of the nut
GEG.00.240.LN
48.3
● Material: blue polyurethane
www.lemo.com
35
®
®
DCB Spanner for slotted nut
60
Part number
of the nut
19
Part number
DCB.91.455.0LN
GEB.00.242.LN
ø 11
● Material: Steel, nicked plated
DCB Spanner for round nut
50
Part number
of the nut
40
Part number
DCB.91.119.0TN
GEB.00.240.LN
ø 11
● Material: Blackened steel
DCN Spanner for assembling plug with 3 latches
12
Part number
42
ø9
DCN.91.905.0TK
● Material: Blackened steel
DCP Flat spanner for collet nut
L
Dimensions
M
N
S1
M
Part number
DCP.99.045.TC
DCP.99.050.TC
DCP.99.055.TC
DCP.99.060.TC
N
S1
S1
L
70
78
78
78
2
2
2
2
10.5
12.6
12.6
12.6
4.5
5.0
5.5
6.0
● Material: Chrome-plated steel
DCR Extraction tool for plugs
Part number
DCR.91.106.0PN
ø 12
ø 10.3
120
● Material: Black Polypropylene
9
36
Note: this type of tool has been produced in order to facilitate the
mating and unmating of plugs and is particularly useful in high density
applications.
www.lemo.com
®
®
DPE Crimping tool with die
Part number
DPE.99.000.00
DPE.99.123.1K
DPE.99.123.8K
DPE.99.124.3K
DPE.99.125.2K
DPE.99.176.2K
Cable
group
Crimp collet
ref.
Crimping tool with no die
1
E24
2-3-4
E30, E31
8
E35
5
E44
6-7
E52, E56
DPN Dies
Part number
A
DPN.99.123.1K
DPN.99.123.8K
DPN.99.124.3K
DPN.99.125.2K
DPN.99.176.2K
Die dimension
For contacts For shield
A B L A B
1 1.29 0.91 2.0 3.10
2-3-4 1.29 0.91 2.0 3.80
8 1.29 0.91 2.0 4.36
5 1.29 0.91 2.0 5.20
6-7 1.71 1.21 2.5 6.20
2.70
3.30
3.78
4.50
5.37
B
B
L
A
Cable
group
for contacts
www.lemo.com
for shield
l Dies material: Blackened steel
37
®
®
Panel cut-outs
Panel cut-out
P1
P2
P3
P4
P5
Cut-out
P1
B
+ 0.1
0
L mini
e
P6
P7
øA
P2
P3
P4
+ 0.1
0
P8
P5
B
+ 0.1
0
L mini
øA
P6
P7
P8
Model
ECP-EPE-EPR-EPS-ERC
EWF-EXG-FAB-HGP
HGW-SWH-VPS-XBG
XSG-XRG
EWV
ERC-ERX
ERT
EHP-ELF-ERA-ERE-ERM
ERN-FAA-FAN-PES-PFS
PLK-PSA-PSG-PSS 1)
ABB
ABD
ANC
Dimensions
B
L
A
e
7.1
–
14.5
–
–
–
6.92 + 0.02
0
–
–
–
12.0
9.0
–
M7x0.5
M7x0.5
–
7.1
6.4
14.5
–
9.7
12.9
16.1
9.0
11.7
13.7
15.0
20.5
24.0
–
–
–
Note: 1) If these models are used with a tapered washer GBB,
the panel cut-out must be according P1.
+ 0.1
0
Recommended mounting nut torque: 1 Nm.
PCB drilling pattern
P9
P10 P11 P12 P15
Drill
B
ø A + 00.1
= =
B
øC
+ 0.1
0
Model
A
Dimensions
B
C
P9
EPN
1.0
5.08
–
P10
EPA-EPB-EPC-EPL-EPK
EPM-FPL
0.8
5.08
0.8
P11
P12
P15
FPA
EPE-EPS-EPR-XSG
HEP, EXG
0.8
0.8
1.3
5.08
5.08
5.08
1.1
0.8
0.8
P13
EPY
0.8
5.08
0.8
XRG
1.8
5.5
0.8
P14
P13
B
ø A + 00.1
B
= =
øC
+ 0.1
0
P14
B
ø A + 00.1
2.05
ø C + 00.1
38
www.lemo.com
®
®
Cable assembly
Terminating of plugs and straight sockets with cable collet
5
M1
M2
4
M3
3
1
Straight plug
2
5
3
4
Free socket
5
1
Fixed socket
nut fixing
1. Cable preparation
L ± 0.2
S ± 0.2
T ± 0.2
First place the bend relief (if to be used) on the cable.
Strip the cable according to dimensions below.
Cable
group
M1
T S
L
1-2-3-4-8
4 4.5 9
6-7
– – –
M2
T S
L
– – –
7.5 8.5 13
M3
T S
L
5 5.5 10
– – –
2. Cable termination
2.1 Place the collet nut j and the collet k on the cable. Fold back the
shield braid onto the conical part of the collet, and trim to the outer
edge of the collet
Crimp
2.2 Slide the subassembly l to trap the shield braiding and solder the
central conductor into the contact.
Crimp
2.3 Slide the insulator m onto the subassembly l until it rests against
the earthing sleeve of the subassembly l.
2.4 Slide the assembly into the connector outer shell n. Screw the
collet nut j into the connector outer shell n using the appropriate
tool and tighten to a torque of 0.25 Nm (see “Tooling” on page 35,
36 and 37). Push the bend relief (if used) onto the collet nut.
Note: these terminating instructions apply to the following models:
M1 = FFA, FFE, FFF, PCA, PSA
M2 = FFY
M3 = FFC
www.lemo.com
39
®
®
Terminating of plugs and straight sockets with cable crimping (crimp contact)
4
M4
2
3
Straight plug
1
4
Free socket
3
2
4
Fixed socket
nut fixing
1.
Cable preparation
First place the bend relief (if to be used) on the cable.
Strip the cable according to dimensions below.
L ± 0.2
S ± 0.2
Cable
group
T
M4
S
L
1-2-3-4-8
6-7
7
7
15
15
19.5
21.5
T ± 0.2
2.
Cable termination
2.1 Place crimp ferrule ➀ on the cable. Widen the shield braid.
Slide the subassembly ➁ into the cable until the insulator rests
against the dielectric and the cable conductor is visible through
the contact inspection hole.
Crimp
2.2 Crimp the contact with the LEMO crimping tool using
the square hole (see “Tooling” on page 37).
Gently pull the cable in order to check the crimping.
Crimp
2.3 Slide the crimp ferrule ➀ onto the shield until it rests against
the crimp backnut of the subassembly ➁. Crimp with the same
LEMO crimping tool using the hexagonal opening.
Slide the insulator ➂ onto the subassembly ➁.
2.4 Slide the assembly into the connector shell ➃ and screw it
onto the subassembly ➁. Tighten using the appropriate tool
to a torque of 0.25 Nm (see “Tooling” on page 35, 36 and 37).
Push the bend relief (if used) onto the crimp ferrule ➀.
Note: these terminating instructions apply to the following models:
M4 = FFS, FFV, PCS, PSS, PES
40
www.lemo.com
®
®
Terminating of plugs and straight sockets with cable crimping (solder contact)
4
M5
2
3
Straight plug
1
4
Free socket
3
2
4
Fixed socket
nut fixing
1.
Cable preparation
First place the bend relief (if to be used) on the cable.
Strip the cable according to dimensions below.
L ± 0.2
S ± 0.2
Cable
group
T
M5
S
L
1-2-3-4-8
6-7
5
5
12
12
17
19
T ± 0.2
2.
Cable terminating
2.1 Place the crimp ferrule ➀ on the cable. Widen the shield braid.
Slide the subassembly ➁ over the cable until the insulator rests
against the dielectric and the cable conductor is visible through
the contact solder hole.
2.2 Solder the conductor through the hole.
Solder
Solder
2.3 Slide the crimp ferrule ➀ onto the shield until it rests against
the crimp backnut of the subassembly ➁.
Crimp with the LEMO crimping tool using the hexagonal opening
(see “Tooling” on page 37).
Slide the insulator ➂ onto the subassembly ➁.
2.4 Slide the assembly into the connector shell ➃ and screw
it onto the subassembly ➁. Tighten using the appropriate tool
to a torque of 0.25 Nm (see tooling on pages 35, 36 and 37).
Push the bend relief (if used) onto the crimp ferrule.
Note: these terminating instructions apply to the following models:
M5 = FFS, FFV
www.lemo.com
41
®
®
Terminating of elbow plugs (90°) with cable collet (solder contact)
3
M6
and cable crimp (solder contact)
M7
5
4
2
3
4
2
1
1
1.
Cable preparation
1.
First place the bend relief
(if to be used) on the cable.
Strip the cable according to
dimensions below.
L ± 0.2
S ± 0.2
2.
Solder
42
Cable
group
T
M6
S
L
1-2-3-4-8
1
3.5
6.5
First place the bend relief
(if to be used) on the cable.
Strip the cable according to
dimensions below.
L ± 0.2
S ± 0.2
T ± 0.2
T ± 0.2
Cable terminating
Cable preparation
2.
Cable
group
T
M7
S
L
1-2-3-4-8
6-7
1
3
4.5
4.5
9
11
Cable terminating
2.1 Place the collet nut ➀ and
collet ➁ on the cable. Fold
back the shield braid onto
the conical part of the collet,
and trim to outer edge of the
collet.
2.1 Place the cable crimp ferrule
➀ on the cable and widen
the braiding.
2.2 Slide the assembly into
the connector shell ➂
and tighten the collet nut ➀
using the appropriate tool
to a torque of 0.25 Nm
(see “Tooling” on page 35,
36 and 37). Check that
the cable conductor rests
in the contact slot, solder
the conductor through
the hole.
2.2 Slide the cable into the connector shell ➁. Check that
cable conductor rests in the
contact slot, tin solder the
conductor through the hole.
Slide the crimp ferrule ➀ over
the braiding until it reaches
the connector shell ➁. Crimp
with the LEMO crimp tool
using the hexagonal opening
(see “Tooling” on page 37).
Solder
2.3 Place the insulating sleeve ➃
over the soldered contact.
2.3 Place the insulating sleeve ➂
over the soldered contact.
2.4 Close the access hole with
the flat screw ➄.
Push the bend relief (if used)
onto the collet nut ➀.
2.4 Close the connector hole
with the flat screw ➃.
Push the bend relief (if used)
onto the crimping tube ➀.
Note: these terminating instructions apply to the following
models:
Note: these terminating instructions apply to the following
models:
M6 = FLA
M7 = FLS, FLV
www.lemo.com
01 SERIES
www.lemo.com
®
®
01 Series
The plugs and sockets of the 01 series are amongst the smallest available 50 Ω coax connectors with a self-latching
intermating capability. In spite of their small size and light weight, their technical characteristics remain excellent.
Available in a wide range of housing configurations, they are especially useful when connecting onto printed circuit
boards.
Metal housing models (page 46)
Fixed plug
Straight plugs
FPA
FFS
Fixed sockets
Elbow socket
Fixed socket
Fixed coupler
ERA
EPL
PSS
RAD
Free socket
Free coupler
PCS
RMA
Elbow plugs
FFH
ECP
FLS
EPA
Plug with
resistor
FRT
T-plug with
two sockets
FLH
FTA
Adaptors (See page 50)
T-coupler
RTA
ABA
Threated-latching models (See page 50)
FVS
44
EVP
HEV
www.lemo.com
®
®
Part Numbering System
Plug
FFS . 01 . 250 .
D L A E 31
Free socket
PCS . 01 . 250 . D L L E 31
Cable ø
Collet type:
E = with cable crimping
Contact type:
A = male solder
L = female solder
Fixed plug
FPA . 01 . 250 . D L D
Fixed socket
ERA . 01 . 250 . D L L
Contact type:
L = female solder
N = female print
D = male print
RAD . 01
Fixed coupler
250 . D L M
Contact type:
M = female-female
F = female-female-male
X = female-female-female
Model: (page 44)
Series: 01
Insulator:
L = PCTFE
Insert configuration:
250 = coaxial (50 Ω)
Housing :
N = brass nickel-plated 1)
D = brass gold-plated
Note: 1) treatment not available for the printed circuit models
Part Number Example
FFS.01.250.DLAE31 = straight plug for cable crimping, 01 series, coaxial type 50 Ω, outer shell is gold-plated brass,
PEEK insulator, male solder contact, type E crimp ferrule for cable group 2, 3 or 4.
Part Section Showing Internal Components
Straight plug
Fixed socket
4
1
2
3
4
outer shell
female contact
hexagonal nut
insulator
2
3
1
1
5
6
2
4
3
1
2
3
4
5
6
www.lemo.com
outer shell
latch sleeve
crimp ferrule
crimp backnut
male contact
insulator
45
®
®
Metal housing models
Technical Characteristics
Mechanical and climatical
Characteristics
Cable pull off force 1)
Connector pull off force
Endurance
Voltage Standing Wave Ratio
Value
> 100 N
> 110 N
> 1000
cycles
Operating temperature
Standard
Test
IEC 69512-9
IEC 69512-8
17c
15f
IEC 69512-5
9a
The VSWR (Voltage Standing Wave Ratio) is the value
representing the power reflected in a connection.
In most cases, the working frequency range is where
VSWR is ≤ 1.25.
1
- 55°C + 230°C
VSWR
Note: 1) Depending on cable design
1N = 0.102 kg
1.3
50Ω
Electrical
1.2
Characteristics
Impedance
Operating voltage (50 Hz)
Test voltage (50 Hz)
Rated current
Contact resistance
Screen resistance
Insulating resistance
VSWR
Value
Standard
Method
50 Ω
–
0.3 kV rms
–
1.0 kV rms IEC 60512-2
4 A IEC 60512-3
< 6 m Ω IEC 60512-2
< 3.5 m Ω
> 1012 Ω IEC 60512-2
see chart N°1 beside
4a
5a
2a
1.1
1.0
3a
1000
2000
3000
4000
FFS + PCS
5000 f
(MHz)
Note : VSWR measured with a RG-174 A/U cable. According to IEC
60169-1-1 standard
FFS Straight plug for cable crimping
20
Part number
ø5
14.5
S4
S4
FFS.01.250.DLAE24
FFS.01.250.DLAE31
M1
Cable
group
1
2-3-4
Cond. Dielectric Ø
Ø max
max
0.55
0.55
0.95
1.65
Sheath Ø
max
2.35
3.0
Cable assembly (page 53)
FFH Straight plug, non-latching
for cable crimping
18
ø5
13
S4
46
Part number
Cable
group
FFH.01.250.DLAE31
2-3-4
M1
Cond. Dielectric Ø
Ø max
max
0.55
1.65
Sheath Ø
max
3.0
Cable assembly (page 53)
www.lemo.com
®
®
FLS
Elbow plug (90°) for cable crimping
12.1
ø 7.5
6.6
Part number
12
FLS.01.250.•LAE24
FLS.01.250.•LAE31
M2
Cable
group
Cond.
Ø max
Dielectric Ø
max
Sheath Ø
max
1
2-3-4
0.5
0.5
0.95
1.65
2.35
3.0
Cable assembly (page 53)
• = material of shell D or N
FLH Elbow plug (90°) non-latching,
for cable crimping
11
6
14.5
Part number
FLH.01.250.•LAE31
M3
Cable
group
Cond. Ø
maxi
2-3-4
0.4
Dielectric Ø Sheath Ø
maxi
maxi
1.65
3.0
Cable assembly, crimp contact (page 53)
• = material of shell D or N
FPA Straight plug, non-latching,
for printed circuit
13
1
3
5
6
Part number
Weight
(g)
FPA.01.250.DLD
ø 0.9
1.5
P 4 PCB drilling pattern (page 53)
ERA Fixed socket, nut fixing
M5x0.5
10.5
ø8
ø6
4
Part number
Weight
(g)
ERA.01.250.•LL
1.3
S5
S7
2 max
P1 Panel cut-out (page 53)
• = material of shell D or N
Part number
ø7
10.5
5.7
M5x0.5
ECP Fixed socket, nut fixing
(back panel mounting)
Weight
(g)
ECP.01.250.•LL
1.1
3.5 max
P1 Panel cut-out (page 53)
• = material of shell D or N
www.lemo.com
47
®
®
EPA Straight socket for printed circuit
6
Part number
ø 5.8
1
12
3
EPA.01.250.DLN
ø 0.9
Weight
(g)
1.6
P 4 PCB drilling pattern (page 53)
EPL Elbow socket (90°) for printed circuit
12.5
6
8.5
10
ø6
Part number
3
EPL.01.250.DLN
Weight
(g)
3.2
1
P 4 PCB drilling pattern (page 53)
ø 0.9
6
PCS Free socket for cable crimping
18
ø5
Part number
S4
PCS.01.250.DLLE24
PCS.01.250.DLLE31
S4
M1
Cable
group
Cond.
Ø max
Dielectric Ø
max
Sheath Ø
max
1
2-3-4
0.55
0.55
0.95
1.65
2.35
3.0
Cable assembly (page 53)
PSS Fixed socket, nut fixing,
for cable crimping
M5x0.5
18
S7
Part number
ø6
ø8
4
S4
3 maxi
S5
PSS.01.250.DLLE24
PSS.01.250.DLLE31
Cable
group
Cond.
Ø max
Dielectric Ø
max
Sheath Ø
max
1
2-3-4
0.55
0.55
0.95
1.65
2.35
3.0
M1
Cable assembly (page 53)
P1
Panel cut-out (page 53)
FRT Straight plug with resistor
17
ø5
11.5
Part number
FRT.01.250.DLA50
Resistor
Weight
(g)
50 Ω 0.6W
1.0
Note: Non standard, on request only
48
www.lemo.com
®
®
RAD Fixed coupler, nut fixing
M5.5x0.5
14
4
ø8
ø 6.5
Part number
RAD.01.250.DLM
S5
S7
Weight
(g)
1.8
P2 Panel cut-out (page 53)
2 maxi
Note: Non standard, on request only
RMA Free coupler
14
ø5
Part number
RMA.01.250.DLM
Weight
(g)
1.1
FTA T-plug with two sockets in line
ø 7.5
19
12.3
6.8
Part number
FTA.01.250.DLF
Weight
(g)
2.6
Note: Non standard, on request only
RTA T-coupler with three sockets
19
6
11.8
Part number
www.lemo.com
RTA.01.250.DLX
Weight
(g)
2.5
49
®
®
Threaded-latching models
FVS Straight plug, threaded latching
for cable crimping
20
18
ø 6.3
Part number
FVS.01.250.NKAE31
6.5
Cable
group
Cond.
Ø max
Dielectric Ø
max
Sheath Ø
max
2-3-4
0.55
1.65
3.0
S4
S4
M1
Cable assembly (page 53)
M5x0.5
EVP Fixed socket, nut fixing
for threaded latching plug
10.5
ø6
4
ø8
Part number
M5x0.5
S7
EVP.01.250.NKL
Weight
(g)
1.2
2 max
P1
HEV Fixed socket, round nut fixing
for threaded latching plug, watertight
(back panel mounting)
2
Part number
ø6
ø8
2
M5x0.5
12.5
5.5 maxi
5.0 mini
3 min
~ 78mm
Panel cut-out (page 53)
HEV.01.250.NKL
Weight
(g)
2.3
S6
AWG 28
P3 Panel cut-out (page 53)
~ 88mm
Note: this model is fitted with 2 wires AWG28 soldered before potting
Adaptors
ABA Adaptor from LEMO socket
to BNC plug
Part number
27
17.5
ø 14.5
ABA.01.250.NLL
Weight
(g)
50
www.lemo.com
®
®
Spare parts
L
øB
øA
FFS
Crimp ferrule
Part number
FFS.01.160.DA
FFS.01.161.DA
FFH.01.161.D•
● Material: Copper (UNS C 18700) nickel (3µm) + gold plated (0.5µm)
1)
Cable
group
ØA
Dim.
ØB
L
1
2-3-4
2-3-4
3.1
3.8
3.8
2.4
3.05
3.1
6
6
7
Note: 1) for models FFH and FLH
Sockets and plugs to be crimped are always supplied with a
crimp ferrule. To order this accessory separately, use the
above part numbers.
GEA Hexagonal nut
7
2
e
ø8
Part number
GEA.01.240.LN
GEA.01.241.LN
● Material: Brass (UNS C 38500) nickel-plated (3 µm)
e
(mm)
Models
Weight
(g)
M5x0.5
M5.5x0.5
ERA, EVP, PSS
RAD
0.39
0.31
Note: to order this accessory separately, use the above part number.
GEB Round nut
A
M5 x 0.5
2
Part number
1
GEB.01.240.LN
GEB.01.244.LN
A
(mm)
Models
Slot
nb.
Weight
(g)
Ø7
Ø8
ECP
HEV
2
4
0.30
0.50
Note: to order this accessory separately, use the above part number.
● Material: Brass (UNS C 38500) nickel-plated (3 µm)
www.lemo.com
51
®
®
Tooling
DCB Spanner for round nut
(for ECP and HEV model)
14.8
39
40
Part number
of the nut
Part number
DCB.91.097.0TN
ø 7.1
GEB.01.240.LN / GEB.01.244.LN
● Material: Blackened steel
DPE Crimping tool with die
Cable
group
Part number
DPE.99.000.00
DPE.99.003.1K
DPE.99.003.8K
Crimp collet
ref.
Crimping tool with no die
1
E24
2-3-4
E31
1)
2)
Note: 1) Hex cavity of DPE.99.123.1K can also be used
2) Hex cavity of DPE.99.123.8K can also be used
DPN Dies
A
B
DPN.91.003.1K
DPN.91.003.8K
for shield
Die dimension
For shield
A
B
Cable
group
Part number
1
2-3-4
3.10
3.80
2.70
3.30
● Dies material: Blackened steel
DCP Flat spanner
M
Part number
DCP.99.040.TC
DCP.99.045.TC
DCP.99.050.TC
DCP.99.055.TC
DCP.99.060.TC
N
S1
S1
L
Dimensions (mm)
L
M
N
S1
70
70
78
78
78
0.95
2.00
2.00
2.00
2.00
10.5
10.5
12.6
12.6
12.6
4.0
4.5
5.0
5.5
6.0
● Material: Chrome-plated steel
DCP Set of flat spanners
N
S1
S2
M
Part number
M
95
2.5
21
8.1
S2
7.1
L
DCP.91.001.TN
Dimensions
N
S1
L
● Material: Blackened steel
52
www.lemo.com
®
®
Panel cut-outs
Panel cut-out
P1
P2
P3
Cut-out
Ø A + 0.1
0
L mini
P1
P2
P3
Dimensions
A
L
Model
ERA-ECP-EVP-PSS
RAD
HEV
5.1
5.6
6.1
9.5
10.0
10.0
Recommended mounting nut torque: 1.5 Nm.
PCB drilling pattern
P4
Drill
B
= =
B
øA
øC
+ 0.1
0
P4
A
Dimensions
B
C
1.5
5.08
1.0
Model
EPA, FPA, EPL
+ 0.1
0
Cable assembly
Terminating of plugs and straight sockets with cable crimping (solder contact)
M1
M2
M3
L ± 0.2
M•
The cable assembly of the 01.250 requires specific stripping
dimensions. See below.
However the procedure is similar to the 00.250 series.
See pages 41 and 42.
S ± 0.2
T ± 0.2
www.lemo.com
Cable
assembly
Model
T
S
L
M1
FFH-FFS-FVS
PCS-PSS
3.5
6
10
M2
M3
FLS
FLM
1.2
1.2
4
4
8.5
10
Instruction of the 00 series
to use as a reference
M5 (page 41)
M7 (page 42)
M7 (page 42)
53
®
54
®
www.lemo.com
®
®
Technical Characteristics
Outer Shell
Brass
LEMO series 00 & 01 connectors have a brass outer
shell as standard, and this is suitable for most general
purpose applications, including civilian and military.
The brass outer shells have a nickel-plated surface which
ensures very good protection against most environments.
Alternative protective coatings available are:
– Nickel-chrome offering higher protection against salt
air and most corrosive agents
– Nickel-gold
– Nickel-black chrome. After the black chrome treatment,
the part is coated with a protective film.
Plastic Materials
A PEEK outer shell is available which offers excellent
insulating properties and is mostly used in the medical
industry. This material is suitable for gas or steam sterilization.
Other Metallic Components
In general, other components are manufactured from
brass. However, bronze is used where good elasticity is
required (for example: earthing crown).
These parts are nickel or nickel-gold plated depending on
the utilization.
The shell surface is protected by anodizing which is
available in six colors: blue, yellow, black, red, green,
and natural.
Materials and Treatment
Component
Material (Standard)
Brass (UNS C 38500)
Aluminium alloy
PEEK
Cu-Be (UNS C 17300)
Earthing crown
Special Brass
Latch sleeve
Copper (UNS C 18700)
Crimp ferrule
Bronze (UNS C 52100)
Locking washer
Brass (UNS C 38500)
Hexagonal nut
Other metallic components Brass (UNS C 38500)
Silicone or FPM
O-ring and gaskets
Epoxy
Sealing resin
Outer shell, collet nut,
conical nut
or notched nut
Nickel
Cu
Ni
Surface Treatment (µm)
Chrome
Gold
Cu
Ni
Cr Cu
Ni
Au
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
3
3
3
3
3
3
3
–
–
–
–
–
–
3
–
–
–
–
–
–
0.3 0.5
3
anodized
beige colored
–
0.5
3
–
0.5
3
–
0.5
3
–
0.5
3
–
0.5
3
–
0.5
3
without treatment
–
0.5
Black Chrome
Cu
Ni
Cr
–
1
2
Notes: The surface treatment
standards are as follows:
– nickel SAE AMS QQ N 290,
or MIL DTL 32119
1.5
1.5
1.5
0.5
0.5
0.5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
– chrome SAE AMS 2460
– gold ISO 27874
– black chrome
MIL DTL 14538
with a minimum of 10 µm
lacquer protection
Electrical Characteristics
Shell electrical continuity
(measured according to IEC 60512-2 test 2f)
Values with earthing crown and latch sleeve or inner-sleeve nickel
R1 plated.
R2 Values with gold-plated earthing crown and nickel plated latch
sleeve or inner-sleeve.
R3 Values with earthing crown and gold-plated latch sleeve or innersleeve.
Serie 00
A
mV
G
Serie 01
R1
(mΩ)
R2
(mΩ)
R3
(mΩ)
R1
(mΩ)
R2
(mΩ)
R3
(mΩ)
3.5
2.8
2.0
N.A
2.3
1.5
Testing current: 1A
A = Ammeter
mV = Millivoltmeter
G = Generator
www.lemo.com
55
®
®
Insulator
Technical Description
Radiation resistance
LEMO uses virgin quality PTFE for the insulator material
of coaxial connectors, which guarantees excellent insulating properties.
LEMO also proposes PEEK (Polyether Etherketone).
Its higher mechanical strength and excellent radiation
resistance make it ideal for most applications.
PEEK
PTFE
rads
10 3
Gray (Gy) 10 1
10 4 10 5 10 6 10 7 10 8 10 9 10 10
10 2 10 3 10 4 10 5 10 6 10 7
10 8
radiation dose γ
Damage
minimal to mild (almost always usable)
mild to moderate (often satisfactory)
moderate to severe (unusable)
Technical Characteristics
Property
Dielectric strength
Volume resistivity at 50% HR and 23°C
Surface resistivity
Thermal conductivity
Comparative tracking index
Dielectric constant (106 Hz)
Dissipation factor (106 Hz)
Maximum continuous service temperature
Minimum continuous service temperature
Water absorption in 24h at 23°C
Radiation resistance
Flammability rating
Test
method
Unit PEEK PTFE
ASTM D 149 / IEC 60243
kV/mm 19 - 25 17.2 - 24
1016 1018
ASTM D 257 / IEC 60093
Ω cm
ASTM D 257 / IEC 60093
Ω 1015 1017
ASTM C 177
W/K m 0.25
0.23
IEC 60112
V
CTI 150 CTI 500
ASTM D 150 / IEC 60250
–
3.2 - 3.5 2 - 2.1
ASTM D 150 / IEC 60250 –
< 0.005 < 0.0003
–
°C 250 260
–
°C -53 -200
ASTM D 570 / ISO R624
%
< 0.3
< 0.01
–
Gy 107 2 102
UL 94 / UL 94
–
V-0/1.5
V0
l
l
Note: the technical data contained
in this chapter gives a general information about plastic materials used
by LEMO as electrical insulator
materials. LEMO reserves the right to
propose new material which would
have higher technical characteristics
and to withdraw any material contained in this publication or others
from LEMO and its subsidiary companies. LEMO only uses granulated,
powdered plastic materials or bars
from specialized suppliers. LEMO
is not responsible, in any case, for
these materials.
l
Electrical Contact
Technical Description
Contact Material
The secure, reliable electromechanical connection
achieved with LEMO female contacts is mainly due to
two important design features:
1. Prod proof entry which ensures perfect concentric
mating even with well used and/or carelessly handled
connectors.
2. The pressure spring that maintains a constant, even
force on the male contact when mated. The leading
edge of the spring is chamfered to slide smoothly on
the male contact, preserving the gold-plated surface
treatment and preventing undue wear.
LEMO female electrical contacts are made from bronze
(UNS C 54400). Bronze is chosen because of its high
modulus of elasticity, its excellent electrical conductivity
and a high mechanical strength.
LEMO male solder and print contacts are made from
brass (UNS C 38500). Male crimp contacts are made
from brass (UNS C 34500) which is ideal for crimping
onto the electrical conductor.
Conductor retention method
Both male and female contacts are available in crimp,
solder or print versions.
Insulation resistance between the contacts
and contact/shell
(measured according to IEC 60512-2 test 3a)
Insulating material
new
after humidity test1)
56
Multipole
PEEK
> 1012 Ω
> 1010 Ω
Unipole
PTFE
> 1012 Ω
> 1010 Ω
Note: 1) 21 days
at 95% RH
according to
IEC 60068-2-3.
www.lemo.com
®
®
Materials and Treatments
Au
Ni
Cu
Bronze
Notes: the standard surface treatments are as follows:
– Nickel SAE AMS QQ N 290 or MIL DTL 32119
– Gold ISO 27874
Surface treatment (µm)
Cu
Ni
Au 1)
Type
Material (Standard)
Male solder
Male crimp
Male print
Brass (UNS C 38500)
Brass (UNS C 34500)
Brass (UNS C 38500)
0.5
3
1.0
Female solder
Female crimp
Female print
Bronze
(UNS C 54400)
0.5
3
1.5
1)
minimum value
Solder Contacts
Features of the LEMO crimp contacts:
The conductor bucket of these contacts is machined at
an angle to form a cup into which the solder can flow.
Design is compatible with the use of lead-free solder.
– Quick and simple assembly
– Insulator is not heated during contact
to conductor assembly
– High temperature applications possible
– Increased conductor retention force
ø 0.7
ø 0.6
Print contacts
Print contacts are available in certain connectors versions,
mostly for the straight or elbow sockets models. Connection is made on flexible or rigid printed circuits by soldering
ø 0.6
ø 0.7
The LEMO crimp contacts are factory annealed to relieve
internal stresses, and reduce the risk of the material
work hardening during the crimping process.
During this process, an induction heating machine
designed by LEMO’s Research and Development
Department is used (photo 2).
ø 0.7
The square form crimp method is used (MIL-C-22520F,
type 2) (photo 1).
The crimp method requires a controlled compression to
obtain a symmetrical deformation of the conductor
strand and of the contact material. The radial hole in the
side of the contact enables correct positioning of the
conductor within the contact to be verified. A good
crimping is characterized by a small conductor section
reduction and by the quite closed free spaces.
Contact Resistance in Relation to Numbers of Mating
Cycles (mesured according to IEC 605/2-2 test 2a)
Contact resistance (mΩ)
1000
3000
5000
cycles
cycles
cycles
5.6
5.7
ø 0.7
1.0
6.1
Gold thickness
female
outside
(µm)
inside
(%)
1.5
70
A = inspection point
2
2.5
2.5
www.lemo.com
Maximum values mesured after the
mating cycles and the salt spray
test according to IEC 60512-6 test
11f.
Thickness comparison between the outside
and the inside of female contacts
male
(µm)
1
ø 0.7
Crimp Contacts
A
A
57
®
®
Cable Fixing
Cable fixing onto LEMO connectors is determined by the connector model. This is achieved either with a cable collet
system or with hexagonal crimping (MIL-C-22520F, type 2).
The collet system cable fixing is made without any special tooling. The crimping method guarantees a good electrical
continuity of the shield which improves greatly the shielding efficiency of the cable/connector link.
Material and Treatment
Component
Earthing sleeve
Collet
Crimp ferrule
Collet nut
Material (Standard)
Brass (UNS C 38500)
Brass (UNS C 38500)
Copper (UNS C 18700)
Brass (UNS C 38500)
Surface Treatment
(µm)
Cu
Ni
0.5
0.5
0.5
0.5
3
3
3
3
Note: collet nut tightening torque: maximum 0.25 Nm (1N = 0.102 kg)
Technical tables
VSWR effect on transmitted power
VSWR
VSWR
(dB)
Return
loss
(dB)
1.00
1.01
1.02
1.03
1.04
1.05
1.06
1.07
1.08
1.09
1.10
1.11
1.12
0
0.1
0.2
0.3
0.3
0.4
0.5
0.6
0.7
0.7
0.8
0.9
1.0
46.1
40.1
36.6
34.2
32.3
30.7
29.4
28.3
27.3
26.4
25.7
24.9
58
Transmiss. Reflected Transmit. Reflected
loss
voltage
power
power
(dB)
coefficient
(%)
(%)
0.000
0.000
0.000
0.001
0.003
0.003
0.004
0.005
0.006
0.008
0.010
0.012
0.014
0.00
0.00
0.01
0.01
0.03
0.02
0.03
0.03
0.04
0.04
0.05
0.05
0.06
100.0
100.0
100.0
100.0
100.0
99.9
99.9
99.9
99.9
99.8
99.8
99.7
99.7
0.0
0.0
0.0
0.0
0.0
0.1
0.1
0.1
0.1
0.2
0.2
0.3
0.3
VSWR
VSWR
(dB)
Return
loss
(dB)
1.13
1.14
1.15
1.16
1.17
1.18
1.19
1.20
1.21
1.22
1.23
1.24
1.25
1.1
1.1
1.2
1.3
1.4
1.4
1.5
1.6
1.7
1.7
1.8
1.9
1.9
24.3
23.7
23.1
22.6
22.1
21.7
21.2
20.8
20.4
20.1
19.7
19.4
19.1
Transmiss. Reflected Transmit. Reflected
loss
voltage
power
power
(dB)
coefficient
(%)
(%)
0.016
0.019
0.021
0.024
0.027
0.030
0.033
0.036
0.039
0.043
0.046
0.050
0.054
0.06
0.07
0.07
0.07
0.08
0.08
0.09
0.09
0.10
0.10
0.10
0.11
0.11
99.6
99.6
99.5
99.5
99.4
99.3
99.2
99.2
99.1
99.0
98.9
98.9
98.8
0.4
0.4
0.5
0.5
0.6
0.7
0.8
0.8
0.9
1.0
1.1
1.1
1.2
www.lemo.com
®
®
Product safety notice
PLEASE READ AND FOLLOW ALL INSTUCTIONS CAREFULLY AND CONSULT ALL RELEVENT NATIONAL AND
INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION.
IMPROPER HANDLING, CABLE ASSEMBLY, OR WRONG USE OF CONNECTORS CAN RESULT IN HAZARDOUS
SITUATIONS.
1. SHOCK AND FIRE HAZARD
Incorrect wiring, the use of damaged components, presence of foreign objects (such as metal debris), and / or residue
(such as cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock.
Mated components should never be disconnected while live as this may result in an exposed electric arc and local
overheating, resulting in possible damage to components.
2. HANDLING
Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect
components should be rejected or returned to the factory for verification.
Connector assembly and installation should only be carried out by properly trained personnel. Proper tools must be
used during installation and / or assembly in order to obtain safe and reliable performance.
3. USE
Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Under general
conditions voltages above 30 VAC and 42 VDC are considered hazardous and proper measures should be taken to
eliminate all risk of transmission of such voltages to any exposed metal part of the connector.
4. TEST AND OPERATING VOLTAGES
The maximum admissible operating voltage depends upon the national or international standards in force for the
application in question. Air and creepage distances impact the operating voltage; reference values are indicated in the
catalog however these may be influenced by PC board design and / or wiring harnesses.
The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is applied at 500 V/s and the
test duration is 1 minute.
5. CE MARKING
CE marking
means that the appliance or equipment bearing it complies with the protection requirements of one
or several European safety directives.
CE marking
applies to complete products or equipment, but not to electromechanical components, such as
connectors.
6. PRODUCT IMPROVEMENTS
The LEMO Group reserves the right to modify and improve to our products or specifications without providing prior
notification.
7.
WARNING (Prop 65 State of California)
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that
cause cancer, birth defects or other reproductive harm. LEMO products are exempt from proposition 65 warnings
because they are manufactured, marketed, and sold solely for commercial and industrial use. For further information,
please visit https://www.lemo.com/quality/LEMO-Prop-65-compliance-declaration.pdf.
Disclaimers
LEMO works constantly to improve the quality of its products; the information and illustrations figuring in this document
may therefore vary and are not binding. In any case, LEMO makes no specific warranty of merchantability, fitness for
a particular purpose, third party components as such or included in assembly, non-infringement, title, accuracy, completeness, or security. The user is fully responsible for his products and applications using LEMO component.
In no event shall LEMO, its affiliates, officers, agents or employees be liable for any incidental, indirect, special or consequential damages in connection with the products or services provided by LEMO, including (without limitation) loss of
profits or revenues, interruption of business, loss of use of the products or any associated equipment, materials, components or products, damages to associated equipment or in combination with other components, materials.
Reproduction of significant portions of LEMO information in LEMO data books or data sheets is permissible only if
reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices.
LEMO is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.
www.lemo.com
59
®
60
®
www.lemo.com
LEMO complete product range
B
S
K
E
F
00
•
•
01
0A
3T
4A
4M
3K.
1D
93C
Y
05
5G
2G
2C
L
H
M
R
N
03
V
W
F
P
D
K/S
01 DIN
Unipole
Multipole
Coaxial 50 Ω
Coaxial 75 Ω
Multi Coaxial
Mixed Coax + LV
Triaxial 50 Ω
Triaxial 75 Ω
Mixed Triax + LV
Quadrax
High Voltage
Multi High Voltage
Mixed HV + LV
Fibre Optic
Multi Fibre Optic
Mixed FO + LV
Thermocouple
Fluidic
Multi Fluidic
Mixed Fluidic + LV
Most frequently used in darker colour
• included in this catalogue
B Series Keyed
S Series
K Series Keyed
E Series
F Series Keyed
00 Series
01 Series
0A Series
3T Series
4A Series
4M Series Keyed
3K.93C Series Keyed
1D Series
Y Series
05 Series
5G Series Keyed
2G Series Keyed
2C Series
L Series Keyed
H Series
M Series Keyed
R Series Keyed
N Series Keyed
03 Series Keyed
V Series
W Series Keyed
Cable assembly
K/S Series Keyed
REDEL F Series
P REDEL Series Keyed
D REDEL Series
01 Series Keyed
VAA Series
SAA Series
TAA Series
No reproduction or use without express permission of editorial or pictorial content, in any manner.
LEMO SA reserves the right to modify and improve specifications, at all times, without any notification.
LEMO HEADQUARTERS
SWITZERLAND
LEMO SA
Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 Ecublens
Tel. +41 21 695 16 00 - e-mail: info@lemo.com
SUBSIDIARIES
AUSTRIA
LEMO Elektronik GesmbH
Lemböckgasse 49/E6-3
1230 Wien
Tel: +43 1 914 23 20 0
Fax:+43 1 914 23 20 11
salesAT@lemo.com
BRAZIL
LEMO Latin America Ltda
Av. Dr. Adhemar de Barros,
566 – Sala 1407, Vila Adyana
CEP: 12245-011
São José dos Campos - SP - Brazil
Tel: +55 11 94242 4293
info-la@lemo.com
CANADA
LEMO Canada Inc
44 East Beaver Creek Road, unit 20
Richmond Hill, Ontario L4B 1G8
Tel: +1 905 889 56 78
Fax: +1 905 889 49 70
info-canada@lemo.com
CHINA / HONG KONG
LEMO Electronics (Shanghai) Co., Ltd
First Floor, Block E,
18 Jindian Road, Pudong
Shanghai, China, 201206
Tel: +86 21 5899 7721
Fax: +86 21 5899 7727
cn.sales@lemo.com
DENMARK
LEMO Denmark A/S
Mandal Allé 16A
5500 Middelfart
Tel: +45 45 20 44 00
Fax: +45 45 20 44 01
info-dk@lemo.com
FRANCE
LEMO France Sàrl
24/28 Avenue Graham Bell
Bâtiment Balthus 4
Bussy Saint Georges
77607 Marne la Vallée Cedex 3
Tel: +33 1 60 94 60 94
Fax: +33 1 60 94 60 90
info-fr@lemo.com
GERMANY
LEMO Elektronik GmbH
Hanns-Schwindt-Str. 6
81829 München
Tel: +49 89 42 77 03
Fax: +49 89 420 21 92
info@lemo.de
HUNGARY
REDEL Elektronika Kft
Nagysándor József u. 6-12
1201 Budapest
Tel: +36 1 421 47 10
Fax: +36 1 421 47 57
info-hu@lemo.com
ITALY
LEMO Italia srl
Viale Lunigiana 25
20125 Milano
Tel: +39 02 66 71 10 46
Fax: +39 02 37 90 80 46
sales.it@lemo.com
JAPAN
LEMO Japan Ltd
2-7-22, Mita,
Minato-ku, Tokyo, 108-0073
Tel: +81 3 54 46 55 10
Fax: +81 3 54 46 55 11
info-jp@lemo.com
LEMO
NETHERLANDS / BELGIUM
LEMO Connectors Nederland B.V.
Jacques Meuwissenweg 6
2031 AD Haarlem
Tel. +31 23 206 07 01
info-nl@lemo.com
NORWAY / ICELAND
LEMO Norway A/S
Soerumsandvegen 69,
1920 Soerumsand
Tel: +47 22 91 70 40
Fax: +47 22 91 70 41
info-no@lemo.com
SINGAPORE
LEMO Asia Pte Ltd
4 Leng Kee Road,
#06-09 SiS Building
Singapore 159088
Tel: +65 6476 0672
Fax: +65 6474 0672
sg.sales@lemo.com
SPAIN / PORTUGAL
IBERLEMO SAU
Brasil, 45, 08402 Granollers
Barcelona
Tel: +34 93 860 44 20
Fax: +34 93 879 10 77
info-es@lemo.com
SWEDEN / FINLAND
LEMO Nordic AB
Gunnebogatan 30
163 53 Spånga
Tel: +46 8 635 60 60
Fax: +46 8 635 60 61
info-se@lemo.com
SWITZERLAND
LEMO Verkauf AG
Grundstrasse 22 B,
6343 Rotkreuz
Tel: +41 41 790 49 40
ch.sales@lemo.com
TAIWAN
TAOYUAN TAIWAN
Tel: +886 967 132 824
speng@lemo.com
UNITED ARAB EMIRATES
LEMO Middle East Connectors LLC
Concorde Tower 11th Floor,
Office 1102, Dubai Media City,
P.O. Box 449849
Dubai, United Arab Emirates
Tel: +971 4 568 1904
info-me@lemo.com
UNITED KINGDOM
LEMO UK Ltd
12-20 North Street, Worthing,
West Sussex, BN11 1DU
Tel: +44 1903 23 45 43
lemouk@lemo.com
USA
LEMO USA Inc
P.O. Box 2408
Rohnert Park, CA 94927-2408
Tel: +1 707 578 88 11
+1 800 444 53 66
Fax: +1 707 578 08 69
info-US@lemo.com
DISTRIBUTORS
ARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC,
GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, SOUTH AFRICA,
SOUTH KOREA, TURKEY, UKRAINE
www.lemo.com
CAT.NC.LEN.P0509, © LEMO / Data subject to change, printed in Switzerland, pdf updated January 2022
LEMO
工商网监
湘ICP备2023018690号
