SMTL6-RGB

CC SMTL6-RGB  Industry Standard PLCC6 Package  3 Chips in One Low Profile Package  High Luminous Intensity  Wide Viewing Angle  High Power Efficiency Bivar SMTL6-RGB LED is offered in an industry standard PLCC6 package with high luminous intensity and wide viewing angles. The miniature package is ideal for small scale applications such as illumination, general indication, and backlighting. Low power consumption and excellent long life reliability are suitable for battery powered equipment. The flexible three chip design allows for a wide variety of lighting options where the chips can be individually driven or mixed to create numerous color and intensity combinations. Bivar SMTL6 LED is packaged in standard tape and reels for pick and place assemblies. Part Number Material Emitted Color Lumen Typ. mcd AlGaInP Red 700 InGaN Green 1500 InGaN Blue 300 SMTL6-RGB Lens Color Viewing Angle Water Clear 140° Outline Dimensions BLUE GREEN Outline Drawings Notes: 1. All dimensions are in inches [millimeters]. 2. Standard tolerance: ±0.010" unless otherwise noted. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES Bivar reserves the right to make changes at any time without notice. Bivar, Inc. — 4 Thomas, Irvine, California 92618, U.S.A. Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar@bivar.com Web: www.bivar.com Revision B 10/22 Page 1 of 6 Absolute Maximum Ratings TA = 25°C unless otherwise noted Power Dissipation 100 mW Continuous Forward Current 30 mA Peak Forward Current 1 100 mA Electrostatic Discharge Classification (HBM) 2000 V Reverse Voltage 5V Derating Linear from 25°C 0.4 mA/°C Operating Temperature Range -30 - +85°C Storage Temperature Range -40 - +90°C Lead Soldering Temperature ( 3 mm from the base of the epoxy bulb ) 250°C 2 Notes: 1. 10% Duty Cycle, Pulse Width ≤ 0.1 msec. 2. Solder time less than 4 seconds at temperature extreme. Electrical / Optical Characteristics T = 25°C & I = 20 mA unless otherwise noted A F Emitting Color Forward Voltage (V)1 Recommend Forward Current (mA) MIN TYP MAX MIN TYP MAX Reverse Dominant Luminous Current Wavelength (nm)2 Intensity Iv (mcd)3 (μA) Viewing Angle 2Ө½ (deg) MAX MIN TYP MAX MIN TYP MAX TYP Red 1.8 / 2.4 / 20 / 10 620 / 630 650 / 1200 140 Green 2.8 / 3.4 / 20 / 10 520 / 530 1400 / 2000 140 Blue 2.8 / 3.4 / 20 / 10 465 / 475 200 / 600 140 Notes: 1. Tolerance of forward voltage : ±0.05V. 2. Tolerance of dominant wavelength : ±1.0nm. 3. Tolerance of luminous intensity : ±15% Directivity Radiation TA = 25°C unless otherwise noted Radiation Diagram Bivar reserves the right to make changes at any time without notice. Bivar, Inc. — 4 Thomas, Irvine, California 92618, U.S.A. Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar@bivar.com Web: www.bivar.com Revision B 10/22 Page 2 of 6 Typical Electrical / Optical Characteristics TA = 25°C unless otherwise noted Bivar reserves the right to make changes at any time without notice. Bivar, Inc. — 4 Thomas, Irvine, California 92618, U.S.A. Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar@bivar.com Web: www.bivar.com Revision B 10/22 Page 3 of 6 Recommended Soldering Conditions Soldering Iron 1. Temperature at tip of iron: 300 ̊C Max. (25W Max.) 2. Soldering time: 3 sec ± 1. Bivar reserves the right to make changes at any time without notice. Bivar, Inc. — 4 Thomas, Irvine, California 92618, U.S.A. Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar@bivar.com Web: www.bivar.com Revision B 10/22 Page 4 of 6 Storage 1. The storage temperature and R.H. are 5 ̊C ~30 ̊C, R.H. 60% Max. 2. Once the package is opened, the products should be used within 24 hrs. Otherwise, they should be kept in a dampproof box with a desiccating agent. 3. It is recommended to bake at 70 ̊C ± 3 ̊C for 48 hrs before soldering them after the package is unsealed for 24 hrs. Tape and Reel Dimensions Note: 1000 pcs/Reel BLUE GREEN Outline Drawings Notes: 1. All dimensions are in inches [millimeters]. 2. Standard tolerance: ±0.010" unless otherwise noted. Bivar reserves the right to make changes at any time without notice. Bivar, Inc. — 4 Thomas, Irvine, California 92618, U.S.A. Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar@bivar.com Web: www.bivar.com Revision B 10/22 Page 5 of 6 0.35 [9.0mm] 0.47 [12.0mm] Packaging and Labeling Plan Note: 1 Reel / Bag Sealed ESD and Moisture Barrier Bag Internal Quality Control Label X.XXX Humidity Indicator Card X.XXX Desiccant Bivar Standard Packaging Label Bivar reserves the right to make changes at any time without notice. Bivar, Inc. — 4 Thomas, Irvine, California 92618, U.S.A. Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar@bivar.com Web: www.bivar.com Revision B 10/22 Page 6 of 6