M7F-SMAF

PART CODE: SMAM700000S10A SPECIFICATION SHEET SPECIFICATION SHEET NO. N0310-SMAM700000S10A DATE Mar. 10, 2021 REVISION A0 DESCRIPITION SMD General Rectifier, 2 Pads, SMA series, M7 Type Reverse Voltage 1000V Max. Forward Current 1.0A Max. Operating Temp. Range -55°C ~+150°C Package in Tape/Reel, 2000pcs/Reel RoHS/RoHS III compliant CUSTOMER CUSTOMER PART NUMBER CROSS REF. PART NUMBER ORIGINAL PART NUMBER MDD M7 PART CODE SMAM700000S10A VENDOR APPROVE Issued/Checked/Approved DATE: March 10, 2021 CUSTOMER APPROVE DATE: NextGen Components, Inc. sales@NextGenComponent.com www.NextGenComponent.com PART CODE: SMAM700000S10A SMD GENERAL RECTIFIER SMA SERIES MAIN FEATURE • The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 • Low reverse leakage • High forward surge current capability • High temperature soldering guaranteed: 250℃/ 10 seconds at terminals • Glass passivated chip junction APPLICATION • For printed circuit board RFQ PART CODE GUIDE Request For Quotation SMA M700000 S 10A 1 2 3 4 1) SMA: SMD General Rectifier, 2 Pads, SMA series 2) M700000: Type code for original part number M7 3) S: Package code, Tape/reel, 2000pcs/reel. 4) 10A: Specification code for Reverse Voltage 1000V Max. Forward Current 1.0A Max. MORE ITEMS AVAILABLE SMAM100000S105 SMAM200000S110 SMAM600000S180 SMAM700000S10A SMAS1A0000S105 SMAS1B0000S110 SMAS1K0000S180 SMAS1M0000S10A SMAS2A0000S105 SMAS2B0000S110 SMAS2K0000S180 SMAS2M0000S10A NextGen Components, Inc. SMAM300000S120 SMAM400000S140 SMAM500000S160 SMAS1D0000S120 SMAS1G0000S140 SMAS1J0000S160 SMAS2D0000S120 SMAS2G0000S140 SMAS2J0000S160 sales@NextGenComponent.com www.NextGenComponent.com PART CODE: SMAM700000S10A SMD GENERAL RECTIFIER SMA SERIES DIMENSION (Unit: Inch/mm) Image for reference Marking: M7 SMA/DO-214AC Recommend Pad Layout NextGen Components, Inc. sales@NextGenComponent.com Symbol Unit (Inch) Unit (mm) A 0.066 1.680 B 0.060 1.520 C 0.154 3.900 D 0.095 2.410 E 0.215 5.450 www.NextGenComponent.com PART CODE: SMAM700000S10A SMD GENERAL RECTIFIER SMA SERIES MECHANICAL DATA Case Terminals Polarity Mounting Position Weight per piece JEDEC SMA/DO-214AC molded plastic body Solder plated, Solderable per MIL-STD-750, Method 2026 Polarity symbol marking on case Any 0.0023 Ounce, 0.0715 grams MAX. RATING & CHARACTERISTICS Parameter SYMBOLS VALUE Min. Typical UNITS Max. Repetitive peak reverse voltage V RRM 1000 Volts RMS voltage V RMS 700 Volts DC blocking voltage V DC 1000 Volts Average forward output rectified current I AV 1.0 A at TL= 110°C I FSM Peak forward surge current 8.3ms single half 30 A sine-wave superimposed on rated load (JEDEC Method) Instantaneous forward voltage at 1.0A DC reverse current at rated DC blocking voltage TA=25℃ VF 1.10 Volts IR 5 µA 50 µA TA=125℃ Junction capacitance (Note 2) CJ 15 pF Thermal resistance (Note 3) R QJA 75 °C/W Operating junction temperature range Storage temperature range TJ -55 +150 °C T STG -55 +150 °C Note 1. Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. 2. Measured at 1.0MHz and applied reverse voltage of 4.0Voltage 3. P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas. NextGen Components, Inc. sales@NextGenComponent.com www.NextGenComponent.com PART CODE: SMAM700000S10A SMD GENERAL RECTIFIER SMA SERIES RELIABILITY Number Experiment Items Experiment Method And Conditions Reference Documents 1 Solder Resistance Test Test 260°C± 5°C for 10 ± 2 sec. Immerse body into solder 1/16” ± 1/32" MIL-STD-750D METHOD-2031.2 2 Solderability Test 230°C ±5°C for 5 sec. MIL-STD-750D METHOD-2026.1 0 3 Pull Test 1 kg in axial lead direction for 10 sec. MIL-STD-750D METHOD-2036.4 4 Bend Test 0.5Kg Weight Applied To Each Lead, Bending Arcs 90 °C ± 5 °C For 3 Times MIL-STD-750D METHOD-2036.4 5 High Temperature Reverse Bias Test TA=100°C for 1000 Hours at VR=80% Rated VR MIL-STD-750D METHOD-1038.4 6 Forward Operation Life Test TA=25°C Rated Average Rectified Current MIL-STD-750D METHOD-1027.3 7 Intermittent Operation Life Test On state: 5 min with rated IRMS Power Off state: 5 min with Cool Forced Air. On and off for 1000 cycles. MIL-STD-750D METHOD-1036.3 8 Pressure Cooker Test 15 PSIG, TA=121°C, 4 hours MIL-S-19500 APPENOIXC 9 Temperature Cycling Test -55°C~+125°C; 30 Minutes For Dwelled Time 5 minutes for transferred time. Total: 10 cycles. MIL-STD-750D METHOD-1051.7 10 Thermal Shock Test 0°C for 5 minutes., 100°C for 5minutes, Total: 10 cycles MIL-STD-750D METHOD-1056.7 11 Forward Surge Test 8.3ms Single Sale Sine-wave One Surge. MIL-STD-750D METHOD-4066.4 12 Humidity Test TA=65°C, RH=98% for 1000 hours. MIL-STD-750D METHOD-1021.3 13 High Temperature Storage life Test 150°C for 1000 Hours MIL-STD-750D METHOD-1031.5 NextGen Components, Inc. sales@NextGenComponent.com www.NextGenComponent.com PART CODE: SMAM700000S10A SMD GENERAL RECTIFIER SMA SERIES SUGGESTED REFLOW PROFILE (For Reference Only) • Recommended peak temperature is over 245℃, If peak temperature is below 245 ℃, you may adjust the following parameters; time length of peak temperature (longer), time length of soldering (longer), thickness of solder paste (thicker) • Welding shall not exceed 2 times • Remark: lead free solder paste (96.5 sn/3.0 Ag/0.5Cu) NextGen Components, Inc. sales@NextGenComponent.com www.NextGenComponent.com PART CODE: SMAM700000S10A SMD GENERAL RECTIFIER SMA SERIES RATINGS AND CHARACTERISTIC CURVES (For Reference Only) NextGen Components, Inc. sales@NextGenComponent.com www.NextGenComponent.com PART CODE: SMAM700000S10A SMD GENERAL RECTIFIER SMA SERIES TAPE/REEL (Unit: mm) All Devices are packed in accordance with EIA standard RS-481-A and specifications. Item Symbol Tolerance SMA/DO-214AC Carrier width A 0.1 2.8 Carrier Length B 0.1 5.33 Carrier Depth C 0.1 2.36 Sprocket hole d 0.05 1.50 13”Reel outside diameter D - - 13”Reel inner diameter D1 - - 7”Reel outside diameter D 2.0 178.00 7”Reel inner diameter D1 Min. 62.00 Feed hole diameter D2 0.5 13.00 Sprocket hole position E 0.1 1.75 Punch hole position F 0.1 5.50 Punch hole pitch P 0.1 4.00 Sprocket hole pitch P0 0.1 4.00 Embossment center P1 0.1 2.0 Overall tape thickness T 0.1 0.28 Tape width W 0.3 12.00 Reel width W1 1.0 18.0 NextGen Components, Inc. sales@NextGenComponent.com www.NextGenComponent.com PART CODE: SMAM700000S10A SMD GENERAL RECTIFIER SMA SERIES PACKAGE Case Code Reel Size MPQ (pcs) SMA 7” 2,000 Component Spacing (mm) Qty. Per Box (pcs) Inner Box L*W*H (mm) Reel Size (mm) Carton size L*W*H (mm) Qty. Per Carton (pcs) G. W 4,000 183*155*183 178 370*370*380 80,000 11.0 (kg) DISCLAIMER NextGen Component, Inc. reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information NextGen Components, Inc. sales@NextGenComponent.com www.NextGenComponent.com