W2SS060G1TA-D11MC2-BS1.A1 数据手册
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
Wintec Solid State Drive
2.5” SATA II
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
INFORMATION IN THIS DOCUMENT IS PROVIDED IN RELATION TO WINTEC
INDUSTRIES PRODUCTS, AND IS SUBJECT TO CHANGE WITHOUT NOTICE.
NOTHING IN THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY LICENSE,
EXPRESS OR IMPLIED.
ALL INFORMATION IN THIS DOCUMENT IS PROVIDED ON AN “AS-IS” BASIS WITHOUT
GUARANTEE OR WARRANTY OF ANY KIND.
Please contact your nearest Wintec representative for the latest updates or additional
product information.
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
1
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
Revision History
Revision
Month
Year
History
0.99c
April
2011
1.0
1.01
June
6/23
2011
2011
1.1
1.1.1
1.1.2
6/30
July
Jan
2011
2011
2012
Preliminary Release
Revised Colors and formatting, added IOPS to Table 2 pg.4
Added sections 1.3-1.11
Update Configuration with NAND flash capacities
Correct table 1 and 16 SLC NAND flash user capacities for
64GB -01 and -A1 versions. Remove 128GB SLC version.
Change part number SKUs to reflect the actual user capacities
Update tables with overprovisioning %
Correct Typo
Legal Information:
TM
TM
TM
SandForce, DuraClass , DuraWrite , and RAISE are registered trademarks of SandForce, Inc.
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
2
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
Table of Contents
1.0
General Product Specification .......................................................................... 5
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
2.0
Electrical Specification ...................................................................................... 9
2.1
2.2
3.0
General ..................................................................................................................................... 9
Table 6: Absolute Maximum Ratings ....................................................................................... 9
Table 7: Typical Operating Conditions (VCC=5V 10%) .......................................................... 9
Table 8: Power consumption .................................................................................................... 9
SATA Pin Assignment and Description .................................................................................. 10
Table 9: SATA connector specification compliant .................................................................. 10
Software Interface ............................................................................................ 11
3.1
3.2
3.2.1
4.0
Table 1: User Capacity Specifications ..................................................................................... 5
Table 2: Typical Performance Specifications ........................................................................... 5
Table 3: Flash Endurance ........................................................................................................ 5
Table 4: SSD Data Reliability ................................................................................................... 5
Table 5: Environmental Specifications ..................................................................................... 5
Block Diagram .......................................................................................................................... 6
Figure 1. Block Diagram ........................................................................................................... 6
Architecture .............................................................................................................................. 6
Queue Depth ............................................................................................................................ 7
Data compression and Write amplification ............................................................................... 7
AES-128 Data encryption and Secure Erase .......................................................................... 7
Read disturb data loss mitigation ............................................................................................. 7
Flash cell wear leveling ............................................................................................................ 7
Error correction and data integrity ............................................................................................ 7
Block recycling and Garbage collection ................................................................................... 8
TRIM support ......................................................................................................................... 8
ATA Command Set ................................................................................................................ 11
Table 10: ATA Feature Set .................................................................................................... 11
Table 11: ATA Command ...................................................................................................... 11
SMART Command Support ................................................................................................... 14
Table 12: SMART Command Set ........................................................................................... 14
SMART Attribute Sector ...................................................................................................... 14
Table 13: SMART Attribute Data Structure ............................................................................ 14
Table 14: SMART Attribute Menu Summary .......................................................................... 15
Physical Specifications .................................................................................... 16
Table 15: Physical Specifications ........................................................................................... 16
Figure 2: Physical Dimensions ............................................................................................... 16
5.0
Ordering Information ........................................................................................ 17
Table 16: Product Availability List & Naming ......................................................................... 17
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
3
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx Endure Series
Features
GENERAL
Density up to 512GB
SandForce SF-1200 controller with internal cache buffer
SATA-II (3.0 Gbps) interface
SATA-I (1.5 Gbps) backwards compatible
High-Performance SLC or MLC NAND Flash memory
PERFORMANCE
Ultra High Performance 285MB/s Seq. Read
Ultra High Performance 275MB/s Seq. Write
Sustained Random Read: 30,000 IOPS at 4KB transfer
Sustained Random Write: 10,000 IOPS at 4KB transfer
Power balancing minimizes energy consumption
Wintec Solid State Drive
RELIABILITY
Intelligent Block Management & Wear Leveling
Intelligent Data Retention optimization
Powerful ECC Engine: Up to 24 bytes correctable per 512B sector
Automatic encryption (AES-128) and optional password security
MTTF: 2,000,000 operating hours.
NOTE:
See Section 5.0 for Configuration & Ordering Guide
COMPATIBILITY
Serial ATA Revision 2.6 Compliant
ATA/ATAPI-7 Compliant
Supports TRIM and Smart command Transport
Description
The Wintec Industries WxSSxxxG1TA(I)-D1xx Endure series of ROHS Compliant Solid State Drives are constructed with
NAND-type flash memory devices paired to SandForce SF-1200 SSD controller for virtual-to-physical address mapping
and other sophisticated flash management functions. The Wintec Flash Solid State Disk (SSD) provides major
advantages over the traditional magnetic hard disk drive (HDD). Faster access time and transfer rate, silent operation
and low power consumption, better shock and vibration resistance, and lower total cost of ownership make the Wintec
SSDs an attractive choice as the next generation mass storage device.
The Endure series SSD provides high-speed data transfer and reliability utilizing SLC or MLC NAND-flash in storage
capacities ranging from 32GB to 512GB, in a small 2.5” hard drive form factor. Its robust design enables the SSD to
achieve outstanding reliability and performance. Sequential reads at up to 285MB per second and sequential writes at up
to 275MB per second, are the best in its class.
TM
With the proprietary DuraClass technology, the SF-1200 controller implements superior wear-leveling techniques and
minimizes data write amplification to ensure that the NAND flash memory is not worn out prematurely. The controller also
overcomes the flash memory ‘Read Disturb’ issues by tracking reads and refreshes data in proximity before the data is
TM
negatively impacted. The controller utilizes 24 bytes ECC algorithms and embedded RAISE
internal redundant array
to provide the protection and reliability of RAID on a single disk without any write overhead penalty to the host.
Combining intelligent bad block management, wear leveling management, read disturb management, block consolidation
and recycling, automatic data compression, AES-128 encryption, and multiple data hardening technologies, the Wintec
Endure series SSD guarantees maximum reliability and longevity of the SSD.
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
4
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
1.0 General Product Specification
For all the following specifications, values are defined at ambient temperature unless otherwise stated.
Table 1: User Capacity Specifications
Model Number¹ (typ)
2,3
W7SS025G1TA(I)-D1xx-yyy.zz
W7SS050G1TA(I)-D1xx-yyy.zz
W7SS060G1TA(I)-D1xx-yyy.zz
W2SS025G1TA(I)-D1xx-yyy.zz
W2SS050G1TA(I)-D1xx-yyy.zz
W2SS055G1TA(I)-D1xx-yyy.zz
W2SS060G1TA(I)-D1xx-yyy.zz
W2SS080G1TA(I)-D1xx-yyy.zz
W2SS100G1TA(I)-D1xx-yyy.zz
W2SS115G1TA(I)-D1xx-yyy.zz
W2SS160G1TA(I)-D1xx-yyy.zz
W2SS200G1TA(I)-D1xx-yyy.zz
W2SS240G1TA(I)-D1xx-yyy.zz
W2SS400G1TA-D1xx-yyy.zz
W2SS480G1TA-D1xx-yyy.zz
NAND Flash Type
SLC
SLC
SLC
MLC
MLC
MLC
MLC
MLC
MLC
MLC
MLC
MLC
MLC
MLC
MLC
NAND Flash Total
Capacity
32 GB
64 GB
64 GB
32 GB
64 GB
64 GB
64 GB
96 GB
128 GB
128 GB
192 GB
256 GB
256 GB
512 GB
512 GB
Over-Provision
28%
28%
7%
28%
28%
14%
7%
20%
28%
11%
20%
28%
7%
28%
7%
NOTE:
1. See Section 4.0 for Configuration & Ordering Guide
2. 1GB = 1,000,000,000 Bytes
3. Capacity available to end-user is less than “Total Capacity” due to flash controller overhead, and may vary with flash configuration.
Table 2: Typical Performance Specifications
Parameter
Sequential Read
Sequential Write
IOPS Random Read
IOPS Random Write
Typical Performance
4
up to 285 MB/sec
up to 275 MB/sec
up to 30,000 IOPS
up to 10,000 IOPS
NOTE:
4. Bandwidth measured on high-performance desktop system. Note that performance may also vary depending on host system, drive
capacity, and drive configuration. Measured at QD=32.
Table 3: Flash Endurance
Parameter
Spec
up to 100,000 cycles for SLC
up to 10,000 cycles for MLC
5 Years (Min.)
2,000,000 Hours
Program/Erase Cycles
Data Retention
MTTF
Table 4: SSD Data Reliability
Parameter
Non-Recoverable Errors
Raw ECC Correctability
Table 5: Environmental Specifications
Parameters
Commercial Temp.
Temperature
Industrial Temp.
Humidity (Non-Condensing)
Vibration
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Spec
16
< 1 in 10 Bytes Read
Up to 24 bits / 512 Bytes data
Operating
0C to 70C
-40C to 85C
5% to 95%
20 G RMS
Revision 1.1.2
Non-Operating
-55C to 95C
-55C to 95C
5% to 95%
N/A
5
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
Shock (Operating)
Noise
1.1
1,500 G (Max.)
0 dB
0 dB
Block Diagram
SATA-II Interface
Flash Channel 1
MLC NAND Flash
Memory Chips
Flash Channel 2
MLC NAND Flash
Memory Chips
Flash Channel 3
MLC NAND Flash
Memory Chips
Flash Channel 4
MLC NAND Flash
Memory Chips
Flash Channel 5
MLC NAND Flash
Memory Chips
Flash Channel 6
MLC NAND Flash
Memory Chips
Flash Channel 7
MLC NAND Flash
Memory Chips
Flash Channel 8
MLC NAND Flash
Memory Chips
DuraClass
Flash Controller Chip
2.5" Hard Drive Form factor
Figure 1. Block Diagram
1.2
Architecture
The Wintec Endure series SSD utilizes a single flash controller chip with 8 parallel channels
of flash memory interface. The flash controller also simultaneously manages the file read
and write interface with the host system via a single SATA-II interface. By utilizing 8 parallel
channels of SLC or MLC flash memory, combined with internal NAND die redundancy, the
Wintec SSD can provide both high performance and reliability, while maintaining a minimal
unit cost. While other SSDs rely only upon the ECC spare area within the NAND chips to
correct inevitable bit errors within the data, the D1-series SSD has additional error correction
mechanisms, and can maintain data integrity even after complete loss of an entire NAND
flash die.
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
6
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
1.3
Queue Depth
In order to maximize the performance potential of the Wintec D1 series SSD, a queue depth
of 32 commands is enabled when used in AHCI mode. This allows multi-threaded disk IO
requests from the host to be serviced in parallel within the drive, as well as combining small
write requests in the D1 controller’s internal buffer to minimize write amplification effects.
1.4
Data compression and Write amplification
The D1 series SSD contains an internal data compression algorithm that is processed inside
the controller’s internal processing buffer. The internal cache buffer allows for efficient data
compression without any involvement from the host or user. This data compression allows
for the actual amount of data written to the flash cells to be less than the data written to the
drive from the host, greatly extending the reliability and lifetime of the drive beyond our
competitors’ SSD products.
1.5
AES-128 Data encryption and Secure Erase
Upon initialization of the D1 series SSD, an internal randomly generated AES-128
encryption key is generated in the controller. This encryption key is not externally
accessible, which ensures integrity of the encryption key and the data that it protects. This
key is then used to encrypt all data being written to the flash. Only encrypted data is written
to the physical NAND flash chips, which ensures that any data polled straight from the
NAND flash chips is undecipherable to unauthorized parties. When an ATA Secure Erase
command is sent to the drive, the controller erases and resets the internal encryption key,
rendering the data in the NAND flash undecipherable. The data allocation map data, all
LBAs and SMART logs are also erased. The Secure Erase process takes less than 4
seconds to complete, regardless of capacity. After the Secure Erase is completed, the drive
is still functional, but the old existing data is unrecoverable.
1.6
Read disturb data loss mitigation
In typical flash read situations, reading of data in nearby cells will cause an accelerated loss
of charge from neighboring flash storage cells. The D1 series SSD tracks the number of
reads to locations within the flash and will dynamically move data that is at a higher risk of
error accumulation and data loss. If other SSD solutions do not actively manage for read
disturb effects, this will lead to much shorter data retention times.
1.7
Flash cell wear leveling
The SSD tracks the number of PE (program/erase) cycles that each block in the SSD goes
through, and will dynamically remap logical sectors written from the host to different physical
pages and blocks within the NAND flash memory. This ensures that the flash cells will wear
evenly, and that no premature wear out or data loss will occur in any portions of the drive.
1.8
Error correction and data integrity
The D1 series SSD incorporates multiple levels of error correction and data redundancy to
maintain data integrity. The D1 series uses ECC correction from the spare area on the
NAND itself, a dedicated redundant NAND flash die for parity information, as well as a data
path CRC check to ensure that data errors are detected and correctable. The redundant
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
7
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
NAND flash die can maintain data integrity even after the loss of an entire NAND die. These
multiple error detection and correction mechanisms allow the D1 series SSD to maintain
lower Uncorrectable Bit Error Rates (UBER) than traditional HDD drives, throughout their
entire service lifetime.
1.9
Block recycling and Garbage collection
As data is written to the SSD from the host, the Logical LBAs do not match with the page or
erase block sizes within the NAND flash chips, which means that as the user data fills the
drive there is always some amount of data fragmentation or non-contiguous logical LBA
mapping to adjacent flash cells. This also means that invalid data is mixed into a block with
valid data. By moving and combining valid data from multiple blocks within the device, and
then writing that data to an empty block, free space can be made into whole free blocks.
This maximizes performance within the D1 series SSD, and is done internally within the
drive.
1.10
TRIM support
The D1 series SSD supports the TRIM command. Data that has been deleted from the host
can be marked as free space by the host issuing the TRIM command to the drive. This
allows the drive to more efficiently reclaim free space and maintain performance.
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
8
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
2.0 Electrical Specification
2.1
General
Table 6: Absolute Maximum Ratings
Symbol
VCC
Parameter
VCC With Respect to GND
Min
-0.5
Max
Units
6.0
V
Max
5.5
70
85
95
Units
V
C
C
%
Table 7: Typical Operating Conditions (VCC=5V 10%)
Symbol
VCC
TA
H
Parameter
VCC With Respect to GND
Operating Temperature (Commercial Temp)
Operating Temperature (Industrial Temp)
Humidity
Min
4.5
0
-40
5
Table 8: Power consumption
Symbol
Parameter
Value
Units
Pi
Idle Power consumption
0.65
Watts
5
Typical operating power consumption
1.10
Watts
PT
5
Maximum operating power consumption
2.00
Watts
Pmax
5
Power measurements taken under IOMeter06 stress load with 4kB aligned reads and writes
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
9
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
2.2
SATA Pin Assignment and Description
The SATA connectors are compliant with standard SATA power specifications. As is
standard, power may be supplied to all of the power pins. However, only the 5V power pins
are utilized to provide power to the SSD. Therefore, where non-standard power supplies and
connections are utilized, the power supply does not need to supply the SSD with power to
the 3.3V or 12V power pins.
Table 9: SATA connector specification compliant
No.
Signal
Plug Connector pin definition
S1
GND
S2
A+
S3
A-
S4
GND
S5
B-
S6
B+
S7
GND
Ground
Differential signal A
Ground
Differential signal B
Ground
Key and spacing separate signal and power segments
Power
P1
V33
3.3V power (Not Used)
P2
V33
3.3V power (Not Used)
P3
V33
3.3V power, pre-charge (Not Used)
P4
GND
Ground
P5
GND
Ground
P6
GND
Ground
P7
V5
5V power, pre-charge
P8
V5
5V power
P9
V5
5V power
P10
GND
Ground
P11
DAS/DSS
Device Activity Signal
P12
GND
Ground
P13
V12
12V power, pre-charge (Not Used)
P14
V12
12V power (Not Used)
P15
V12
12V power (Not Used)
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
10
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
3.0 Software Interface
3.1
ATA Command Set
The Wintec Industries SSD drive complies with ATA-8. All mandatory, and some optional commands and
features are supported. The following tables summarize the ATA feature set and commands.
Table 10: ATA Feature Set
Feature Set
ATA-8
Reference
General feature set
48-Bit Address feature set
General Purpose Logging (GPL) feature set
Host Protected Area ( HPA) feature set
Native Command Queuing (NCQ) feature set
Power Management feature set
4.2
4.4
4.10
4.11
4.15
4.18
Security feature set
4.20
4.21
4.22
S.M.A.R.T feature set
Software Settings Preservation (SSP) feature set
Manadatory /
Optional
M
O
O
O
O
M
O
O
O
Table 11: ATA Command
Command
General Feature Set
NOP
Data Set Management EXT ( I.E. TRIM)
Recalibrate
Read Sector(s)
Read Sector(s) w/o retry
Read Long
Read Long w/o retry
Read Sector(s) EXT
Read DMA EXT
Read Multiple EXT
Read Log EXT
Write Sector(s)
Write Sector(s) (w/o retry)
Write Long
Write Long w/o retry
Write Sector(s) EXT
Write DMA EXT
Write Multiple EXT
Write DMA FUA EXT
Write Log EXT
Read Verify Sector(s)
Read Verify Sector(s) (w/o retry)
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
OpCode
00h
06h
10h
20h
21h
22h
23h
24h
25h
29h
2Fh
30h
31h
32h
33h
34h
35h
39h
3Dh
3Fh
40h
41h
11
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
Read Verify Sector(s) EXT
Write Uncorrectable EXT
Read Log DMA EXT
Write Log DMA EXT
Read FPDMA Queued
Write FPDMA Queued
SEEK
Execute Device Diagnostic
Initialize Device Parameters
Download Microcode
Read Multiple
Write Multiple
Set Multiple Mode
Read DMA
Read DMA (w/o retry)
Write DMA
Write DMA (w/o retry)
Write Multiple FUA EXT
Read Buffer
Flush Cache
Write Buffer
Flush Cache EXT
Identify Device
Set Feature [Enable/Disable - Write Cache, Look-ahead, Automatic
Acoustic mgnt., Reverting to power-on defaults, DMA setup FIS autoactivate optimization, Device-initiated interface power state transitions,
software settings preservations] Set transfer mode ( based on value in
sector count register)
Power Management Feature Set
Standby Immediate
Idle Immediate
Standby
Idle
Check Power Mode
Sleep
Security Mode Feature Set
Security Set Password
Security Unlock
Security Erase Prepare
Security Erase Unit
Security Freeze Lock
Security Disable Password
SMART Feature Set
SMART Execute Off-Line Routine
SMART Execute Short Self-test Routine
SMART Execute Extended Self-test Routine
SMART Execute Selective Self-test Routine
SMART Abort Off-Line Routine
SMART Execute Short Self-test Routine (captive)
SMART Execute Extended Self-test Routine (captive)
SMART Execute Selective Self-test Routine (captive)
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
12
42h
45h
47h
57h
60h
61h
70h
90h
91h
92h
C4h
C5h
C6h
C8h
C9h
CAh
CBh
CEh
E4h
E7h
E8h
EAh
ECh
EFh
E0h
E1h
E2h
E3h
E5h
E6h
F1h
F2h
F3h
F4h
F5h
F6h
B0h
B0h
B0h
B0h
B0h
B0h
B0h
B0h
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
SMART Execute Conveyance Self-test Routine (offline)
SMART Execute Conveyance Self-test Routine (captive)
SMART SCT ( SMART Command transport) Command/Status
SMART Data Transfer
SMART SCT Control: Forced Write Cache Enable/Disable
SMART SCT Data Tables: Read Table:(HAD)Temperature History
SMART Read Data
SMART Enable/Disable Autosave
SMART Execute Off-line Immediate
SMART Read Log
SMART Write Log
SMART Enable Operations
SMART Disable Operations
SMART Return Status
SMART Read Threshold
SMART Save ATB Threshold
Host Protected Area Feature Set
Read Native Max Address
Read Native Max Address EXT
Set Max Address
Set Max Address EXT
Set Max Set Password
Set Max Lock
Set Max unLock
Set Max Freeze Lock
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
B0h
B0h
B0h
B0h
B0h
B0h
B0h/D0h
B0h/D2h
B0h/D4h
B0h/D5h
B0h/D6h
B0h/D8h
B0h/D9h
B0h/DAh
B0h/D1h
B0h/D3h
F8h
27h
F9h
37h
F9h/01h
F9h/02h
F9h/03h
F9h/04h
13
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
3.2
SMART Command Support
The Wintec Industries SSD drive supports SMART command Set is used to define some vendor-specific
data to report spare/bad block numbers in each memory management unit.
Table 12: SMART Command Set
Value
Command
Value
Command
00-CF
D6h
Reserved
Write Log sector
D0h
D7h
Read Data attributes
Write attribute threshold
D1h
D8h
Read attribute Threshold
Enable SMART operation
D2h
D9h
Enable/Disable attribute autosave
Disable SMART operation
D3h
DAh
Save attribute Values
Smart Return Status
D4h
DBh
Execute OFF-LINE Immediate
Enable / disable automatic off-line
D5h
DC-FFh
Read Log sector
Reserved
3.2.1 SMART Attribute Sector
The following 512 bytes defines the SMART format. Users can obtain the data using the “Read Data”
command.
Table 13: SMART Attribute Data Structure
Byte
Description
0-1
SMART structure version code
2
1st Stored Attribute Number
3-4
Status
5
Nominal value
6
Worst value since SSD was deployed
7-12
Raw Data
13
Reserved
14-25
Next Stored Attribute Number
26-361
Next Stored Attribute Numbers
362
Off-line data collection status
363
Self-test execution status byte
364-365
Total time in seconds to complete off-line data collection activity
366
Reserved
367
Off-line data collection capability
368-369
SMART capability
370
Error Logging capability
bit 0
1 = Device error logging supported
371
Next Self Test Step
372
Short self-test routine recommended polling time ( in minutes)
373
Extended self-test routine recommended polling time ( in minutes)
374
Conveyance self-test routine recommended polling time ( in minutes)
375-376
Time for Extended Self Test if > 255 ( ie, 373 to FFh)
377-385
Reserved
386-510
Vendor specific
511
Checksum of Data structure ( generated on retrieval of stored data )
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
14
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
3.2.2 Supported SMART Attributes
The following table summarizes the SMART attribute Menu.
Table 14: SMART Attribute Menu Summary
ID
Hex
Attribute Name
Description
1
01h
Raw Read Error Rate
5
9
12
13
100
05h
09h
0Ch
0Dh
64h
Retired Block Count
Power-On Hours (POH)
Device Power Cycle Count
Soft Read Error Rate
Gigabytes Erased
170
AAh
Reserve Block Count
171
172
174
ABh
ACh
AEh
Program Fail Count
Erase Fail Count
Unexpected Power loss
count
Raw error rate related to ECC errors. Correctable and
uncorrectable errors are included in error event count
Tracks the total number of retired blocks.
Total count of hours in power-on state.
The count of full disk power on/off cycles.
The number of corrected ECC read errors reports
The number of Flash bytes erased across the entire drive
over the life of the drive
Returns current number of reserve (over-provisioned)
blocks
Counts the number of flash program failure
Counts the number of flash erase failure
Counts the number of unexpected power loss events
since the drive was deployed
177
B1h
Wear Range Delta
181
182
184
B5h
B6h
B8h
Program Fail Count
Erase Fail count
Reported I/O Error Detection
Code Errors
187
BBh
Reported Uncorrectable
Errors
This attribute tracks the number of uncorrectable errors
reported back to the host for all data access commands
194
195
C2h
C3h
Reserved
On-the-fly ECC
Uncorrectable Error Count
Not used
This attribute tracks the number of uncorrectable errors.
(UECC)
196
C4h
Reallocation Even Count
198
C6h
Uncorrectable Sector Count
This attribute tracks the number of blocks that fail
programming which are reallocated as a result
Number of uncorrectable errors when reading/writing a
sector since the drive was deployed
199
C7h
SATA R-Errors Error Count
SATA R-Errors (CRC) Count
201
C9h
Uncorrectable Soft Read
Error Rate
Number of soft read errors that cannot be fixed on-the-fly
TM
and requires deep recovery via RAISE (ieUECC)
204
230
CCh
E6h
Soft ECC correction Rate
Life Curve Status
231
232
241
E7h
E8h
F1h
SSD Life left
Available Reserved Space
Lifetime Writes from Host
242
F2h
Lifetime Reads from Host
Number of errors corrected by RAISE
A life curve used to help predict life in terms of the
endurance based on the number of writes to flash
Indicates the approximate percentage of SDD life left
The number of reserved blocks remained.
Indicates the total amount of data written from hosts since
the drive was deployed
Indicates the total amount of data read to hosts since the
drive was deployed
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Return the percent difference in wear between the mostworn block and least-worn block
(Identical to attribute 171)
(Identical to attribute 172)
I/O Error Detection Code error count. The attribute tracks
the number of end-to end CRC errors encountered during
host initiated reads and writes.
TM
Revision 1.1.2
15
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
4.0 Physical Specifications
Table 15: Physical Specifications
Weight:
Length:
Width:
Thickness:
4.0 oz typical
100.0 mm
70.0 mm
9.5 mm
Figure 2: Physical Dimensions
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
16
Wintec Solid State Drive
WxSSxxxG1TA(I)-D1xx
Endure (D1) Series
32GB – 512GB
5.0 Ordering Information
Table 16: Product Availability List & Naming
A.
Drives with over 20% provisioning ( Improve Reliability & Write Amplification, more Bad
Block tolerance with less flash screening )
NAND Flash Type Overprovision
User Capacity
Model Number¹
2,3
(typ)
W7SS025G1TA(v)-D1xx-yyy.zz
W7SS050G1TA(v)-D1xx-yyy.zz
W2SS025G1TA(v)-D1xx-yyy.zz
W2SS050G1TA(v)-D1xx-yyy.zz
W2SS080G1TA(v)-D1xx-yyy.zz
W2SS100G1TA(v)-D1xx-yyy.zz
W2SS160G1TA(v)-D1xx-yyy.zz
W2SS200G1TA(v)-D1xx-yyy.zz
W2SS400G1TA-D1xx-yyy.zz
SLC
SLC
MLC
MLC
MLC
MLC
MLC
MLC
MLC
B. Drives with more capacities
Model Number¹
NAND Flash Type
25 GB
50 GB
25 GB
50 GB
80 GB
100 GB
160 GB
200 GB
400 GB
28%
28%
28%
28%
20%
28%
20%
28%
28%
Overprovision
User Capacity
2,3
(typ)
60 GB
7%
55 GB
16%
60 GB
7%
115 GB
11%
240 GB
7%
480 GB
7%
(xx) Memory Manufacturer and Die Revision
(select and locked by Wintec)
(yyy) Flash configuration
W7SS060G1TA(v)-D1xx-yyy.zz
SLC
W2SS055G1TA(v)-D1xx-yyy.zz
MLC
W2SS060G1TA(v)-D1xx-yyy.zz
MLC
W2SS115G1TA(v)-D1xx-yyy.zz
MLC
W2SS240G1TA(v)-D1xx-yyy.zz
MLC
W2SS480G1TA-D1xx-yyy.zz
MLC
(v) Temperature grade
(blank): Commercial (0° to 70° C)
I:
Industrial (-40° to 85° C)
(zz) Firmware Revision/Options
Please contact the factory for the latest firmware revisions and/or custom labeling and programming
identification.
Contact Us (US & Int’l):
Wintec Industries OEM Sales
675 Sycamore Drive
Milpitas, CA 95035
Ph: 408-856-0500
Fax: 408-856-0501
oemsales@wintecind.com
http://www.wintecind.com/oem
About Wintec Industries, Inc.:
Wintec Industries, founded in 1988, is headquartered in Milpitas, California. Wintec, an ODM/OEM solution provider,
specializes in product designs and manufacturing, including Flash modules (CF, SD, USB, embedded Flash, SSD, etc),
DRAM modules (RDIMM, SODIMM, UDIMM), wireless products, modem products (embedded and USB), Advanced Digital
Display products (ADD2 DVI, HDMI, digital signage), and so on. With experienced engineering team in Silicon Valley,
Wintec provides a wide range of services and solutions for customers. Wintec is ISO9001-2000 certified.
Important Notice:
Wintec Industries makes no representations or warranties with respect to the contents of this datasheet and specifically
disclaims any implied warranties of any product design for any particular purpose. Wintec Industries reserves the rights to
revise this publication and to make changes from time to time in the content hereof without obligation of Wintec
Industries to notify any person or organization of such revisions or changes.
WintecSSD-WxSSxxxG1TA(I)-D1xxv1_1_2
January 2012 Wintec Industries, Inc.
Revision 1.1.2
17