EK014BS011

Doc. No.1P081-00 Product Specifications Customer Standard Description 1.44” TFT EPD Panel Model Name EK014BS011 Date 2016/04/01 Doc. No. 1P081-00 Revision 03 Customer Approval Date The above signature represents that the product specifications, testing regulation, and warranty in the specifications are accepted Design Engineering Approval Check 蘇 蘇 2016.04.01 2016.04.01 倉民 倉民 Design 陳 2016.04.01 家瑩 4F, No. 28, Chuangye Rd., Tainan Science Park, Tainan City 74144, Taiwan (R.O.C.) Tel: +886-6-279-5399 Rev.: 03 Fax: +886-6-505-5300 Page: 1 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 Copyright Pervasive Displays Incorporated All rights reserved. This document is the exclusive property of Pervasive Displays Inc. (PDI) and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技股份有限公司專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 龍亭新技股份有限公司 Pervasive Displays Inc. 4F, No. 28, Chuangye Rd., Tainan Science Park, Tainan City 74144, Taiwan (R.O.C.) Tel: +886-6-279-5399 http://www.pervasivedisplays.com Rev.: 03 Page: 2 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 Table of Contents Revision History ........................................................................................................... 6 Glossary of Acronyms ................................................................................................... 7 1 General Description ................................................................................................ 8 2 1.1 Overview ..................................................................................................... 8 1.2 Features ...................................................................................................... 8 1.3 Applications ................................................................................................. 8 1.4 General Specifications ................................................................................... 9 1.5 Mechanical Specifications............................................................................. 10 Absolute Maximum Ratings .................................................................................... 12 2.1 3 2.2 Reliability Test Item .................................................................................... 13 Electrical Characteristics ........................................................................................ 14 3.1 4 5 7 8 9 Absolute Maximum Ratings of Panel .............................................................. 14 3.2 Recommended Operation Conditions of Panel ................................................. 14 Application Circuit Block Diagram ........................................................................... 16 Terminal Pin Assignment & Reference Circuit ............................................................ 17 5.1 6 Absolute Ratings of Environment .................................................................. 12 Terminal Pin Assignment.............................................................................. 17 5.2 Reference Circuit ........................................................................................ 19 Optical Characteristics........................................................................................... 20 6.1 Test Conditions ........................................................................................... 20 6.2 Optical Specifications .................................................................................. 20 6.3 Optical ...................................................................................................... 20 6.4 Ghosting.................................................................................................... 23 Packing ............................................................................................................... 24 Precautions.......................................................................................................... 26 Definition of Labels ............................................................................................... 28 Rev.: 03 Page: 3 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 List of Figures Figure 1-1 EPD Drawing ................................................................................. 11 Figure 2-1 Operating Range of Relative Humidity and Temperature ...錯誤! 尚未定義書 籤。 Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Rev.: 03 3-1 3-2 3-3 4-1 5-1 6-1 6-2 7-1 9-1 9-2 9-3 9-4 Test Pattern of Panel ...................................................................... 15 Image Update Current Profile .......................................................... 15 Current Measurement .................................................................... 15 Application Circuit Block Diagram .................................................... 16 EPD Reference Circuit .................................................................... 19 Optical measurement ..................................................................... 20 Definition of Viewing Angle to Measure Contrast Ratio ........................ 22 Packing Diagram ........................................................................... 24 Model Labels ................................................................................. 28 Definition of Model Labels ............................................................... 28 Carton Label ................................................................................. 29 Pallet Label ................................................................................... 29 Page: 4 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 List of Tables Table Table Table Table Table Table Table Table Table Table Table Rev.: 03 1-1 1-2 1-3 2-1 2-2 3-1 3-2 5-1 6-1 6-2 6-3 General Specification ......................................................................... 9 Mechanical Specification .................................................................. 10 FPC Specification ............................................................................ 10 Absolute Ratings of Environment ...................................................... 12 Reliability Test Items ....................................................................... 13 Absolute Maximum Ratings of Panel .................................................. 14 Recommended Operation Conditions of Panel ..................................... 14 Terminal Pin Assignment .................................................................. 17 Optical Test Conditions .................................................................... 20 Optical Measurement with D65 light source ........................................ 20 Measurement of Ghosting ................................................................ 23 Page: 5 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 Revision History Version Date Ver.01 2014/09/24 Ver.02 Ver.03 Rev.: 03 2015/03/18 2016/04/01 Page Section (New) All All Description Product specification first issued. 1 Amend company address & fax no. 2 Amend company address 9 1.4 Table 1-1, Add driver IC. 28 9 12 2.1 1. Modified Table 2-1, Min. value & note (1)(2)(3) 2. Delete Figure 2-1 13 2.2 1 Modified Table 2-2, low temperature 21 6.2.1 24 7 Modified Figure 7-1 Packing Diagram, carton label location 27 8 Precautions, add item (23) 29 9 Modified Figure 9-3 Carton Label size to 100*100mm Figure 9-1, Add model labels dimension and position Modified Figure 6-1, Optical measurement, EPD panel need face up & remove protection film Page: 6 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 Glossary of Acronyms EPD Electrophoretic Display (e-Paper Display) EPD Panel EPD EPD Module EPD with TCon board TCon Timing Controller TFT Thin Film Transistor MCU Microcontroller Unit FPC Flexible Printed Circuit FPL Front Plane Laminate SPI Serial Peripheral Interface COG Chip on Glass PDI Pervasive Displays Incorporated Rev.: 03 Page: 7 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 1 General Description 1.1 Overview This is a 1.44” a-Si, active matrix TFT, Electronic Paper Display (EPD) panel. The panel has such high resolution (111 dpi) that it is able to easily display fine patterns. Due to its bi-stable nature, the EPD panel requires very little power to update and needs no power to maintain an image. 1.2 Features - a-Si TFT active matrix Electronic Paper Display(EPD) - Resolution: 128 x 96 - Ultra low power consumption - Super Wide Viewing Angle - near 180° - Extra thin & light - SPI interface - RoHS compliant 1.3 Applications Rev.: 03 - Electronic shelf label (ESL) - Reusable container - Badge Page: 8 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 1.4 General Specifications Table 1-1 General Specification Item Specification Unit Note (1) Outline Dimension 40.512(H) x 28.800(V) x 1.100(T) mm Active Area 29.312(H) x 21.984(V) mm Driver Element a-Si TFT active matrix - FPL Aurora Ma - Pixel Number 128 x 96 pixel Pixel Pitch 0.229 x 0.229 (111dpi) mm Pixel Arrangement Vertical stripe - Display Colors Black/White - Surface Treatment Anti-Glare - Driver IC G2 - - Note (1): Not including the FPC. Rev.: 03 Page: 9 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 1.5 Mechanical Specifications Table 1-2 Mechanical Specification Item Glass Size Min. Typ. Max. Unit Horizontal(H) 40.21 40.51 40.81 mm Vertical(V) 28.50 28.80 31.10 mm 1.0 1.1 1.2 mm - 2.6 3.2 g Thickness(T) Weight Note (1) Note (1): Not including the Masking Film. Table 1-3 FPC Specification Item Golden Finger Rev.: 03 Pin numbers 40 Pitch (mm) Connector 0.5 STARCONN 089H40 or HRS TF31-40S or Compatible Page: 10 of 29 Note Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 Figure 1-1 EPD Drawing General tolerance: ±0.3mm Rev.: 03 Page: 11 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 2 Absolute Maximum Ratings 2.1 Absolute Ratings of Environment Table 2-1 Absolute Ratings of Environment Item Symbol Value Min. Max. Unit Note Storage Temperature TST -20 +60 ºC (1), (3) Operating Ambient Temperature TOP -20 +50 ºC (1), (2), (3) Note (1): (a) 90 %RH Max. (Ta ≦ 40 ºC), where Ta is ambient temperature. (b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC). (c) No condensation and no frost. (d) If users like to put the EPD under some extreme condition (e.g. +60C, < 40% RH), the lifetime of EPD may be shorter than warranty lifetime. Please contact PDi sales respective for details. Note (2): The temperature of panel display surface area should be 0 ºC Min. and 50 ºC Max. Refresh time depends on operating temperature. Note (3): In order to keep good performance of EPD, please refer to precaution for storage condition. Rev.: 03 Page: 12 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 2.2 Reliability Test Item Table 2-2 Reliability Test Items Item Test Condition Remark High Temperature Operation 50 ℃ / 30 %RH for 240h (1) (2) Low Temperature Operation 0 ℃ for 240h (1) (2) Ultra Low Temperature Operation -20 ℃ for 240h (1) (2) High Temperature/Humidity Operation 40 ℃ / 90 %RH for 168h (1) (2) High Temperature Storage 60 ℃ / 26 %RH for 240h (1) (2)(3) Low Temperature Storage -20 ℃ for 240h (1) (2) (3) High Temperature/Humidity Storage 50 ℃ / 80 %RH for 168h (1) (2) (3) Thermal Cycles ( Non-operation ) 1 Cycle:-20℃/30min → 60℃/30min, for 100 Cycles (1) (2) (3) Package Drop Test Drop from 97cm. ( ISTA ) 1 corner, 3 edges, 6 sides. One drop (1) (2) (3) for each. Package Random Vibration Test 1.15Grms, 1Hz ~ 200Hz. ( ISTA ) (1) (2) (3) Note (1): No condensation and no frost during test. End of test, function, mechanical, and optical shall be satisfied. Note (2): The test result and judgment are based on PDI’s 1bit driving waveform, driving fixture and driving system. Note (3): Stay white pattern for storage and non-operation test. Rev.: 03 Page: 13 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 3 Electrical Characteristics 3.1 Absolute Maximum Ratings of Panel Table 3-1 Absolute Maximum Ratings of Panel Parameter Symbol Value Min Max Unit Digital Power VDD -0.3 6.0 V Analog Power VCC -0.3 6.0 V Ground VSS - - Note Connect VSS to Ground Ta = 25 ± 2 ºC 3.2 Recommended Operation Conditions of Panel Table 3-2 Recommended Operation Conditions of Panel Parameter Symbol Digital Power Analog Power Input Voltage Output Voltage Input Leakage Current Rev.: 03 Value Unit Note Min Typ Max VDD 2.3 3.0 3.6 V VCC 2.3 3.0 3.6 V High VIH 0.8VDD - VDD V Low VIL VSS - 0.2VDD V High VOH 0.8VDD - VDD V IOH=0.5mA, SO, BUSY Low VOL VSS - 0.2VDD V IOL=-0.5mA, SO, BUSY High IIH - - 1.0 uA Low IIL - - -1.0 uA Page: 14 of 29 /CS, ID, SCLK, SI, /RESET Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 Input Current DC/DC Inrush Current IDD + ICC - 4 8 mA (1),(2),(3) IPEAK - 30 90 mA (1),(2),(3) Ta = 25 ± 2 ºC Note (1): Figure 3-1 Test Pattern of Panel These currents are tested with PDI test jig. Note (2): VDD=VCC=3.0V Figure 3-2 Image Update Current Profile Time of DC/DC ON Current IDD+ICC(RMS) Time IPEAK 0mA 0mA Image Update Time Note (3): The “Time of DC/DC ON” which contains the some current peak of VGH/VDH/VGL/VDL/VCOM. Figure 3-3 Current Measurement Computer Tektronix TCPA300 Amplifier USB Cable PDI Pattern Generator Board Rev.: 03 Tektronix DPO4054 Digital Phosphor Oscilloscope 10pin FFC PDI Timing Controller Board IDD+ICC(RMS) / IPEAK EPD Module Tektronix Current Probe TCP312 Page: 15 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 4 Application Circuit Block Diagram Figure 4-1 Application Circuit Block Diagram Frame Memory Temperature Sensor e-Paper Panel Pin.1 SPI System Host (MCU) EPD Timing Controller VCC/VDD FPC Pin.40 Driver IC Rev.: 03 Page: 16 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 5 Terminal Pin Assignment & Reference Circuit 5.1 Terminal Pin Assignment Table 5-1 Terminal Pin Assignment No. Signal Type Connected to 1 /CS I Tcon Chip Select. Low enable 2 BUSY O Tcon When BUSY = HIGH, EPD stays in busy state that EPD ignores any input data from SPI 3 ID I Ground 4 SCLK I Tcon Clock for SPI 5 SI I Tcon Serial input from Timing Controller to EPD 6 SO O Tcon Serial output from EPD to Timing Controller 7 /RESET I Tcon Reset signal. Low enable 8 ADC_IN - BORDER Connect to BORDER 9 VCL C Capacitor - 10 C42P C 11 C42M C 12 C41P C 13 C41M C 14 C31M C 15 C31P C 16 C21M C 17 C21P C 18 C16M C 19 C16P C 20 C15M C 21 C15P C Rev.: 03 Charge-Pump Capacitor Charge-Pump Capacitor Charge-Pump Capacitor Charge-Pump Capacitor Charge-Pump Capacitor Charge-Pump Capacitor Page: 17 of 29 Function Connect ID to ground - Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 22 C14M C 23 C14P C 24 C13M C 25 C13P C 26 C12M C 27 C12P C 28 C11M C 29 C11P C 30 VCOM_DRIVER RC Resistor & Capacitor The signal duty cycle can drive VCOM voltage from source driver IC 31 VCC P VCC Power supply for analog part of source driver 32 VDD P VDD Power supply for digital part of source driver 33 VSS P Ground - 34 VGH C Capacitor - 35 VGL C Capacitor - 36 VDH C Capacitor - 37 VDL C Capacitor - 38 BORDER I ADC_IN 39 VST P VCOM_PANEL - 40 VCOM_PANEL C Capacitor VCOM to panel Charge-Pump Capacitor Charge-Pump Capacitor Charge-Pump Capacitor Charge-Pump Capacitor - Connect to ADC_IN Note: Type: Rev.: 03 I: O: C: RC: P: Input Output Capacitor Resistor and Capacitor Power Page: 18 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 5.2 Reference Circuit Figure 5-1 EPD Reference Circuit INPUT J1 /CS BUSY Connect to Timing Controller SPI Connect to Timing Controller GPIO to to to to Timing Timing Timing Timing Controller Controller Controller Controller SPI SPI SPI GPIO C1 2.2u/10V/Y 5V BORDER C2 2.2u/16V/Y 5V R1 0R C3 2.2u/16V/Y 5V C4 2.2u/25V/Y 5V C5 2.2u/25V/Y 5V C6 2.2u/25V/Y 5V C7 2.2u/25V/Y 5V C8 2.2u/16V/Y 5V C9 Connect to Power Ground 2.2u/16V/Y 5V C10 2.2u/16V/Y 5V C11 C12 1u/10V/X7R Connect to Power Switch VCOM VCL C42P C42M C41P C41M C31M C31P C21M C21P C16M C16P C15M C15P C14M C14P C13M C13P C12M C12P C11M C11P 2.2u/16V/Y 5V R2 VCOM_DRIVER 2K/5% VCC VDD VGH 3 Connect to a MOS Switch to prevent leakage current 2N7002KW 2 1 VGH Q1 C13 2.2u/25V/Y 5V C14 2.2u/25V/Y 5V C15 2.2u/25V/Y 5V C16 2.2u/25V/Y 5V /CS BUSY ID SCLK SI SO /RESET ADC_IN VCL C42P C42M C41P C41M C31M C31P C21M C21P C16M C16P C15M C15P C14M C14P C13M C13P C12M C12P C11M C11P VCOM_DRIVER VCC VDD VSS VGH VGL VDH VDL BORDER VST VCOM_PANEL 40PIN 0.5mm PITCH CONNECTOR/PAD EPD PANEL PCB SIDE Connect Connect Connect Connect SCLK SI SO /RESET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 ZIF-40-0.5 VGL VDH 3 VDH VDL 2N7002KW DISCHARGE 1 2 Connect to Timing Controller GPIO Q2 BORDER DISCHARGE: set high for EPD discharge when EPD power off PWM: 100~300KHz, 50% duty cycle, square wave PWM 100n/16V/X7R 3 Connect to Timing Controller GPIO VST C17 1VGL BAT54SW 2 D1 Note: (1) VDD and VCC must be discharged promptly after power off. Rev.: 03 Page: 19 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 6 Optical Characteristics 6.1 Test Conditions Table 6-1 Optical Test Conditions Item Symbol Value Unit Ambient Temperature Ta 25±2 ºC Ambient Humidity Ha 50±10 %RH VCC & VDD 3.0 V Supply Voltage 6.2 Optical Specifications 6.3 Optical Table 6-2 Optical Measurement with D65 light source Item Symbol Contrast ratio Refresh time White Chromaticity Reflectance Rating Unit Note - - θx=θy=0 (1),(2),(3),(4) 4 - sec (3) - 0.308 - Wy - 0.331 - R% - 38 - Min. Typ. Max. CR 5:1 7:1 Tr - Wx - % θx=θy=0 (1),(4) (1),(4) Note (1): Panel is driven by PDI waveform without masking film and optical measurement by CM-700D with D65 light source and SCE mode. Figure 6-1 Optical measurement Rev.: 03 Page: 20 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 SCE mode Rev.: 03 Page: 21 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 Note (2): Definition of Viewing Angle (θx, θy): Figure 6-2 Definition of Viewing Angle to Measure Contrast Ratio Note (3): Refresh time is the time that e-paper particles move not including the power on and off time. The refresh time is measured at 25ºC.The refresh time and contrast ratio varies due to different films, display performance requirements, and ambient temperatures. Note (4): Contrast ratio (C.R.): The Contrast ratio is calculated by the following expression. C.R. =(R% White) / (R% Black). Reflectance is measured at 120 seconds after refresh. Rev.: 03 Page: 22 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 6.4 Ghosting Below are two test methods to verify that ghosting within an acceptable range. Test 1 and Test 2 use measured data to calculate Delta E which is a single number representing the distance between two colors in a 3 dimensional color space. Test 1 and Test 2 are performed at 25ºC.  Test 1: White to Black Ghosting White White Black Refresh immediately White A A’ Measuring L, a, b of A and A’, and calculate the △E*ab Refresh immediately  Test 2: Black to White Ghosting Black Black White Refresh immediately Black Refresh immediately B B’ Measuring L, a, b of B and B’, and calculate the △E*ab The formula is used to calculate Test1 and Test2. For example of Test 2: △E*ab = [ (LB – LB’)2 + (aB – aB’)2 + (bB – bB’)2 ]1/2 Table 6-3 Measurement of Ghosting Item Rating Min. Typ. Max. Test 1 △E*ab - - 2 Test 2 △E*ab - - 2 Note: Panel is driven by PDI waveform without masking film and optical measurement by CM-700D with D65 light source and SCE mode. Rev.: 03 Page: 23 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 7 Packing Figure 7-1 Packing Diagram 36set EPD Tray F/B-EPE UP/DOWN-EPE Drier x2 17X36=612pcs 2pcs Empty Tray 1Pcs Empty Tray R/L-EPE Plastic bag 17pcs Full Tray 1Pcs Empty Tray Carton_Label Carton Vacuum Packaging Note: Rev.: 03 Page: 24 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 Pallet Label Film PP Belt Pallet Protector 612(pcs)x40(BOX)=24480pcs 1.44” EPD BOX N.W. : 1.59Kg G.W. : 4.96 Kg Sea / Land / Air Transportation Rev.: 03 Page: 25 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 8 Precautions 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 The EPD Panel / Module is manufactured from fragile materials such as glass and plastic, and may be broken or cracked if dropped. Please handle with care. Do not apply force such as bending or twisting to the EPD panel. It is recommended to assemble or install EPD panels in a clean working area. Dust and oil may cause electrical shorts or degrade / scratch / dent the protection sheet film. Do not apply pressure to the EPD panel in order to prevent damaging it. Do not connect or disconnect the interface connector while the EPD panel is in operation. Please support as the bezel with your finger while connecting the interface cable such as the FPC. Do not stack the EPD panels / Modules. Do not press the FPC on the glass edge or Pull FPC up / down to 90°. Do not touch the FPC lead connector. Do not touch IC bonding area. It may scratch TFT lead or damage IC function. Wear a Wrist Strap (Grounding connect) when handling and during assembly. Semiconductor devices are included in the EPD Panel / Module and they should be handled with care to prevent any electrostatic discharge (ESD). (An Ion Fan may be needed in assembly operation to reduce ESD risk.) Keep the EPD Panel / Module in the specified environment and original packing boxes when storage in order to avoid scratching and keep original performance. Do not disassemble or reassemble the EPD panel. Use a soft dry cloth without chemicals for cleaning. Please don’t press hard for cleaning because the surface of the protection sheet film is very soft and without hard coating. This behavior would make dent or scratch on protection sheet. Please be mindful of moisture to avoid its penetration into the EPD panel, which may cause damage during operation. It’s low temperature operation product. Please be mindful the temperature different to make frost or dew on the surface of EPD panel. Moisture may penetrate into the EPD panel because of frost or dew on surface of EPD panel, and makes EPD panel damage. High temperature, high humidity, sunlight or fluorescent light may degrade the EPD panel’s performance. Please do not expose the unprotected EPD panel to high temperature, high humidity, sunlight, or fluorescent for long periods of time. Please store the EPD panel in controllable environment of warehouse and original package: Without sunlight, without condensation, a temperature range of 15ºC to 35ºC, and humidity from 30%RH to 60%RH. The label ink used for marking the Panel ID number is erased easily by solvent. Please avoid using solvent to clean the EPD panel. The EPD is vacuum packed. Before approved by PDI and customer, products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. PDI makes every attempt to ensure that its products are of high quality and reliability. However, contact PDI sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment Rev.: 03 Page: 26 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 for life support. 21 Design your application so that the product is used within the ranges guaranteed by PDI particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. PDI bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail safes, so that the equipment incorporating PDI product does not cause bodily injury, fire or other consequential damage due to operation of the PDI product. 22 This product is not designed to be radiation resistant. 23 Please keep R≧1.0mm when bend for assembly. IC R≧ 1.0 mm FPC Rev.: 03 TFT Page: 27 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 9 Definition of Labels Figure 9-1 Model Labels XXXXXXXXXXXX XEXXXXXXXXXXXXXXXXXXX Barcode=ID No.(21 Digits) Figure 9-2 Definition of Model Labels Customs control information XXXXXXXXXXXX XEXXXXXXXXXXXXXXXXXXX (18~21)Serial NO. (15~17)Manufacture Year/Month/Day (12~14)FPL LOT NO. (2~11)Model Name (1)Manufacture vender code Rev.: 03 Page: 28 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。 Doc. No.1P081-00 Figure 9-3 Carton Label Figure 9-4 Pallet Label Model Name. (10 Digits) Pallet Serial No. (7 Digits) EXXXXXXXXX CXXXXXX GW:XXXXKg Q'TY:XXXXX RoHS Q'TY. (5 Digits) Weight. PERVASIVEDISPLAYS (10 Digits) (7 Digits) (5 Digits) Bar Code=Model Name.+Pallet Serial No.+Q'TY.(22 Digits) Pallet Label Rev.: 03 Page: 29 of 29 Date: 2016/04/01 This document is the exclusive property of PDI and shall not be reproduced or copied or transformed to any other format without prior permission of PDI. ( PDI Confidential ) 本資料為龍亭新技專有之財產，非經許可，不得複製、翻印或轉變成其他形式使用。